HSS-Co 11.0 mm metal drill bits, 5 pcs. 57-058-5 by NEO TOOLS are deep ground drills according to DIN 338 and made of M35 steel with 5% cobalt addition. They use an apex angle of 135° and type C shear correction. They have a cylindrical handle. The length of the working part is 94 mm and their overall length is 142 mm. The maximum speeds are: INOX 325-350 rpm, general metals 650-700 rpm. The purpose of this set by NEO TOOLS is to drill in demanding materials such as stainless, acid-resistant and heat-resistant steel.
Universal spanner for drill chucks: 6, 9, 10, 13 mm 56T807 by GRAPHITE is designed to tighten and loosen the drill chuck. The tool supports four popular chuck sizes: 6, 9, 10 and 13 mm, so one spanner can replace several standard models. Made of aluminium, it is characterised by its lightweight construction and convenience of use. Its versatility eliminates the need for multiple spanners, while its ergonomic features ensure a comfortable grip and ease of use when working with the drill.
GRAPHITE Forked Saw Blade (Ref. 55H691) 235mm outside diameter, made from C50 special steel with increased wear and warp resistance. Tungsten carbide teeth with ATB (alternate) geometry for rough cutting of wood and wood-based materials such as plywood, chipboard, MDF. The included reduction rings allow the blade to be used with most saw models. The GRAPHITE brand offers a wide range of power tools to meet professional needs.
Sanding cloth GRAPHITE (ref. no. 55H878) in a sheet with dimensions 230 x 280 mm and granulation 120. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive cloth with J-cloth backing designed for mechanical and manual grinding. The cloth’s close coating (100% of the cloth surface is covered with abrasive grain (alumina)) guarantees greater processing accuracy and the highest efficiency when processing hard materials. . The product designed to be used with orbital grinders, trowels and sanding blocks. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
GRAPHITE set of jigsaw blades contains 6 blades designed for cutting various materials. 4 blades for wood (rough, fine and arc cutting), 1 blade for metal and 1 universal blade for wood and metal. All blades have the most popular T shank that allows installation in most jigsaws available on the market.
GRAPHITE jigsaw blades are used for semi- precise cutting of wood and plastic. T shank allows to use the blades in all jigsaws with BOSCH holder and universal holder. Use of CrV steel (chromium- vanadium) gives high elasticity and resistance to high temperatures. Polished side surfaces of the blade reduce friction and blade heating during cutting.
Sanding cloth GRAPHITE (ref. no. 55H869) in a roll, 2.5 m long, 115 mm wide and granulation 80. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive cloth with J-cloth backing designed for mechanical and manual grinding. The cloth’s close coating (100% of the cloth surface is covered with abrasive grain (alumina)) guarantees greater processing accuracy and the highest efficiency when processing hard materials. The product designed to be used with orbital grinders, trowels and sanding blocks. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Blade for reciprocating saw GRAPHITE about the length 228 mm and 8 with teeth an inch long intended for cutting, among others metal, fiber cement boards, glass fiber reinforced composites, wood with nails, aerated concrete and red brick using saber saws. The maximum thickness of the materials is 175 mm. It is used in renovation, construction and demolition works as well as in home amateur work. It enables straight cutting. The saw blade produces less dust when cutting compared to traditional methods. Enables cutting close to the edge and in hard-to-reach places.
Masonry drill VERTO (ref. no. 60H608) with SDS+ shank, 24.0 mm diameter, with crossed tip with fine grit sintered carbide allows to efficiently drill holes in concrete. Double S4 flute ensures proper drillings extraction and protects the drill against overheating. VERTO brand offers power tool and accessories assortment for all DIY enthusiasts.
Metal drills VERTO (ref. no. 60H077.) with 4.0 mm diameter is made of high speed steel in deep grinding technology. 135° point angle and chisel edge correction allow for easy drilling without punching. Perfect for drilling in steel, wood and plastics. VERTO brand offers power tool and accessories assortment for all DIY enthusiasts.
Solid carbide saw blade GRAPHITE (ref. no. 55H601) with diameters 185 mm, made of MN65 manganese steel alloy with high resistance to temperature and deformations. Teeth with sintered carbide tips YG6A are designed for rough cutting of wood and wood like materials, like plywood, chipboard, MDF. Thanks to included adapter rings it is possible to use the blade in most of saw models.
The GRAPHITE Widia saw blade (ref. 55H693) has an outside diameter of 235 mm and is made from C50 special steel with increased wear and warp resistance. Tungsten carbide teeth with ATB (alternate) geometry for rough cutting of wood and wood based materials such as plywood, chipboard, MDF. The included reduction rings allow the blade to be used with most saw models. The GRAPHITE brand offers a wide range of power tools to meet the needs of professionals.
Masonry drill VERTO (ref no. 60H174) with 6.0 mm diameter. Tipped with fine grit sintered carbide and enhanced resistance to high temperature. Grinded drill flute reduces drilling forces. VERTO brand offers power tool and accessories assortment for all DIY enthusiasts.
