Wood hole saws 26 - 63 mm, h 25 mm, set of 7 pieces 56T749 by GRAPHITE is a set containing 7 pieces with diameters: 26, 32, 38, 45, 50, 56 and 63 mm. The height of each hole saw is 25 mm and the maximum drilling depth is 18 mm. The maximum rotational speed is 1500 rpm. The product is designed for drilling in wood, plasterboard and plastic.
Saw blade, widia, 185 x 30 mm, 48 teeth 57T220 by GRAPHITE, with an external diameter of 185 mm and a mounting hole diameter of 30 mm. It has 48 teeth, the cut width is 2 mm and the tooth angle is 15°. The maximum speed is 9,500 rpm. It is characterised by a fast cutting type. The saw blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.
Sanding papers 93 x 230 mm, P40, 5 pieces, without holes 58T255 by GRAPHITE are P40-graded papers suitable for sanding metal, wood and plastic. A type C paper base, designed for machine sanding, is used to make a single sheet. The semi-open structure, with 100% of the abrasive grain (electrocorundum) covering the surface, ensures adequate performance. GRAPHITE sanding papers are offered in a practical set of 5.
Jigsaw blade, 10 TPI, HCS, U-shaped handle, 2 pieces, clean cut 57T525 by GRAPHITE is a jigsaw blade with 10 TPI tooth density, made of HCS and equipped with a U-shaped handle. The set includes 2 pieces. It has an overall length of 100 mm, a working length of 74 mm, a width of 8 mm, a thickness of 1.5 mm and a tooth spacing of 2.5 mm. Suitable for cutting softwood, chipboard, carpenter's plywood, fibreboard 3-30 mm thick and plastic/epoxy (diameter <30 mm). GRAPHITE brand blade enables clean cutting.
Velcro sanding discs 125 mm, P40, 5 pieces, without holes 58T180 by GRAPHITE are discs without holes for metal, wood and plastic. Gradation P40 - the sharpest - allows appropriate sanding, according to the needs and the stage of surface preparation. The backing is made of type C paper and is suitable for machine use. The electro-corundum abrasive coating ensures high efficiency, and the Velcro fastening allows GRAPHITE discs to be changed quickly and conveniently.
The SDS Plus Double Spiral Concrete Drill 22 x 600 mm 56T159 by GRAPHITE is a concrete, brick and stone drill bit with a double spiral and SDS Plus chuck. It features a diameter of 22mm and an overall length of 600mm and a working length of 470mm. It will prove useful for many tasks around the home and in the workshop.
HSS metal drill bit, DIN 338, 13 mm 54T926 by GRAPHITE is a metal accessory characterised by a diameter of 13 mm, an overall length of 151 mm and a working part length of 101 mm. The drill bit is made from HSS high speed steel. It has a cylindrical chuck and a 118° drill sharpening angle. It is DIN 338 compliant and will be suitable for every DIY enthusiast.
Saw blade, widia, 185 x 30 mm, 36 teeth 57T218 by GRAPHITE, with an external diameter of 185 mm and a mounting hole diameter of 30 mm. It has 36 teeth, the cut width is 2 mm and the tooth angle is 15°. The maximum speed is 9,500 rpm. It is characterised by a fast cutting type. The saw blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.
The SDS Plus double helix 6 x 210 mm 56T105 concrete drill bit by GRAPHITE is a concrete, brick and stone drill bit with a double helix and SDS Plus chuck. It features a diameter of 6mm and an overall length of 210mm and a working length of 140mm. It will prove useful for many tasks around the home and in the workshop.
Set of concrete drill bits:3, 4, 5, 6, 7, 8, 9, 10 mm, 8 pieces 56T500 by GRAPHITE is a set of 8 drill bits for working in concrete, aerated concrete, brick and masonry, equipped with a practical cylindrical handle. The set includes tools with diameters: 3, 4, 5, 6, 7, 8, 9 and 10 mm. It will prove its worth for many tasks.
Yellow sanding paper in roll 2.5 m x 115 mm, P100, 58T423 by GRAPHITE is a product designed for sanding surfaces such as metal, wood, plastic and plasterboard. Made on a D-paper base, it is characterised by high durability and resistance to tearing. Thanks to its open grain, in which the surface is coated with 50-60% electro-corundum abrasive grain, the paper offers greater resistance to sanding dust clogging. It can be used for both manual and machine sanding - including with orbital sanders and gypsum sanding trowels.
Velcro sanding papers 93 x 185 mm, P40, 5 pieces, with 8 holes 58T240 by GRAPHITE is a paper designed for sanding metal, wood and plastics. It has 8 holes for effective dust extraction during work. It uses a type C paper base, suitable for machine sanding. The surface is coated with semi-open grain electro-corundum, where the abrasive grain is 100% coverage. The Velcro attachment makes it easy to change GRAPHITE paper quickly and conveniently while working.
GRAPHITE's 20mm 56T732 diamond hole saw has a brazed diamond blank and a cylindrical shank. It is designed for efficient drilling in stoneware, ceramics, glass and brick. It can work either wet or dry, and the drilling itself is done without impact. The maximum speed of the hole saw is 3000 rpm, while its maximum drilling depth is 30 mm. The GRAPHITE-branded tool is designed for drilling with a drill or a screwdriver.
The Hex 2.0 mm wood drill 54T576 by GRAPHITE is a drill bit designed for working with wood and plywood and features a HEX chuck. It is characterised by a diameter of 2 mm and a length of 69 mm. It is suited to tasks with a maximum speed of 1500 rpm. It will work well for many DIY tasks.
Turbo diamond cutting wheel, 125 x 22.2 mm, dry and wet 57T318 by GRAPHITE is a dry and wet turbo diamond cutting wheel with a diameter of 125 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 7 mm high and 2.2 mm wide. The maximum speed of the disc is 12 200 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of EN 13236 and is designed for cutting stone, brick, marble, granite and concrete.
Saw blade, widia, 130 x 30 mm, 16 teeth 57T204 by GRAPHITE, with an external diameter of 130 mm and a mounting hole diameter of 30 mm. It has 16 teeth, the cut width is 1.9 mm and the tooth angle is 15°. The maximum speed is 12,500 rpm. It is characterised by a fast cutting type. The saw blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.
The 100 mm nylon wheel brush with 6 mm shank 57T423 by GRAPHITE is made of nylon. It has a maximum speed of 4,500 rpm. The product meets the requirements of EN 1083-2 and comes with a 6 mm shank, allowing it to work with any drill or screwdriver. The GRAPHITE nylon brush is a versatile product for many tasks.
The 150 x 32 mm, crimped wire wheel brush 57T435 by GRAPHITE is made of crimped steel wire. Its maximum speed is 6000 rpm. The product meets the requirements of EN 1083-2 and the set includes reductions: 2 x 12.2 mm (1/2"), 2 x 15.7 mm (5/8"), 2 x 19 mm (3/4"), 2 x 22.2 mm (7/8") and 2 x 25.3 mm (1"). The mount is suitable for use with bench grinders. The GRAPHITE wire brush is a versatile product for many tasks.
Saw blade, widia, 185 x 30 mm, 60 teeth 57T221 by GRAPHITE, with an external diameter of 185 mm and a mounting hole diameter of 30 mm. It has 60 teeth, the cut width is 2 mm and the tooth angle is 15°. The maximum speed is 9,500 rpm. It is characterised by a fast cutting type. The saw blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.
The HSS metal drill bit, DIN 338, 8.5 mm 54T914 by GRAPHITE is an accessory for metal, characterised by a diameter of 8.5 mm, an overall length of 117 mm and a working part length of 75 mm. The drill bit is made from HSS high speed steel. It has a cylindrical chuck and a 118° drill sharpening angle. It is DIN 338 compliant and will be suitable for every DIY enthusiast.
