Accessories

Welding materials and accessories

Soldering and gas accessories

View as Grid List

Sort by

Display per page

50 mm nylon wheel brush with 6 mm shank

02-57T421

The 50 mm nylon wheel brush with 6 mm shank 57T421 by GRAPHITE is made of nylon. It has a maximum speed of 4,500 rpm. The product meets the requirements of EN 1083-2 and comes with a 6 mm shank, allowing it to work with any drill or screwdriver. The GRAPHITE nylon brush is a versatile product for many tasks.

3.00€

On request

Water sanding paper 230 x 280 mm, P180

02-58T215

Water sandpaper 230 x 280 mm, P180, 58T215 by GRAPHITE is a water-based hand sanding paper. It has a full grain electro-corundum coating, 100% coverage and a flexible C latex backing. It is suitable for wood, metal, paint, plastic, glass and plasterboard. This type of GRAPHITE brand sandpaper has been developed for use with water. Its special surface is coated with an abrasive layer which forms an abrasive paste on contact with the liquid. It makes the sanding process more efficient. The water also prevents the accumulation of dust, keeping the surface clean and increasing the efficiency of sanding. Working with wet sandpaper also minimises the risk of damage to the surface. The GRAPHITE brand is recommended for DIY enthusiasts.

0.298€

On request

Bit set SL4/6/8, PH1/2/3, PZ1/2/3 x 50 mm, with 60 mm magnetic holder, 10 pcs.

02-56T512

Bit set SL4/6/8, PH1/2/3, PZ1/2/3 x 50 mm, with magnetic holder 60 mm, 10 pcs. 56T512 by GRAPHITE consists of 10 pieces: nine 50 mm long bits in the sizes SL4, SL6, SL8, PH1, PH2, PH3, PZ1, PZ2 and PZ3 and a 60 mm long magnetic holder. All bits are fitted with a 1/4" Hex chuck and are made from tough chrome vanadium steel (CrV) - ensuring versatility and adequate durability during use.

3.70€

On request

Diamond hole saw 8 mm

02-56T727

GRAPHITE's 8mm 56T727 diamond hole saw has a brazed diamond blank and a cylindrical shank. It is designed for efficient drilling in stoneware, ceramics, glass and brick. It can work either wet or dry, and the drilling itself is done without impact. The maximum speed of the hole saw is 3000 rpm, while its maximum drilling depth is 30 mm. The GRAPHITE-branded tool is designed for drilling with a drill or a screwdriver.

3.60€

On request

Concrete drill bit 7 x 100 mm

02-56T206

GRAPHITE's 7 x 100 mm 56T206 concrete drill bit with cylindrical shank, has a diameter of 7 mm, an overall length of 100 mm and a working length of 60 mm. Recommended for concrete, brick and stone applications.

0.806€

On request

Velcro-backed sanding discs 150 mm, P80, 5 pcs, with 8 holes

02-58T283

Velcro sanding discs 150 mm, P80, 5 pieces, with 8 holes 58T283 by GRAPHITE is a set of 5 sanding discs, designed for sanding metal, plastic and wood. It is compatible with orbital and eccentric sanders, with a diameter of 150 mm. The GRAPHITE discs are fitted with 8 holes so that sanding dust is freely discharged during use. The Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by their electro-corundum coating. Their abrasive backing is made of paper. GRAPHITE abrasive discs are recommended for many tasks.

1.90€

On request

Blade for reciprocating saw, BIM, 152 x 19 x 0.9 mm, 18 TPI

02-57T561

The sabre saw blade, BIM 152 x 19 x 0.9 mm, 18 TPI, 57T561 by GRAPHITE is a bi-metal (BIM) blade with an overall length of 152 mm, a width of 19 mm and a thickness of 0.9 mm. It has 18 teeth per inch (TPI) and a tooth spacing of 1.4 mm. It is designed for straight cutting of thin sheet metal 1.5-4 mm thick, open and closed tubes, as well as profiles from 5 to 100 mm in diameter. The flexible design of the GRAPHITE blade allows it to work in harder to reach places.

3.20€

On request

Turbo cutting diamond disc, 150 x 22.22 mm, dry

02-57T319

Turbo diamond cutting wheel, 150 x 22.2 mm, dry 57T319 by GRAPHITE is a turbo dry cutting wheel with a diameter of 150 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 7 mm high and 2.4 mm wide. The maximum speed of the disc is 10 000 rpm, corresponding to 80 m/s. The GRAPHITE disc meets the requirements of EN 13236 and is designed for cutting stone, brick, marble, granite and concrete].

5.70€

On request

Bit set SL3/4/5/6, PH1/2/3, PZ1/2/3, TX10/15/20/25/27/30 x 25 mm, 16 pcs.

02-56T556

Bit set SL3/4/5/6, PH1/2/3, PZ1/2/3, PZ1/2/3, TX10/15/20/25/27/30 x 25 mm, 16 pieces 56T556 by GRAPHITE consists of 16 bits: SL3, SL4, SL5, SL6, PH1, PH2, PH3, PZ1, PZ2, PZ3, TX10, TX15, TX20, TX25, TX27, TX30 with a length of 25 mm. All accessories have a 1/4" Hex handle and are made from tough chrome vanadium steel (CrV) - ensuring versatility and adequate durability during use.

7.30€

On request

Abrasive mesh 115 x 280 mm, P220

02-58T157

Sanding grid 115 x 280 mm, P220 58T157 by GRAPHITE recommended for handheld applications with wood, metal, plastic, glass and plasterboard. It features a double-sided grit and black silicon carbide grain. It is a waterproof, easy-to-clean GRAPHITE mesh that flexibly adapts to the surface. Thanks to the double-sided grit, it is economical and efficient to work with. It will prove its worth in many tasks.

0.298€

On request

Cup wire brush 70 mm, crimped steel wire, with 6 mm shank

02-57T416

The 70 mm, crimped wire, steel butt brush with 6 mm shank 57T416 by GRAPHITE is made of crimped steel wire. Its maximum speed is 4,500 rpm. The product meets the requirements of EN 1083-2 and comes with a 6 mm shank, allowing it to work with any drill or screwdriver. The GRAPHITE wire brush is a versatile product for many tasks.

2.41€

On request

Jigsaw blade, 6 TPI, HSC, U-shaped handle, 2 pcs, rough cutting

02-57T528

Jigsaw blade, 6 TPI, HCS, U-type handle, 2 pieces, coarse cutting 57T528 by GRAPHITE is a jigsaw tool with a toothing density of 6 TPI. Made from HCS, it has a U type handle. Comes in a 2 piece set. The GRAPHITE brand blade has an overall length of 100 mm, a working length of 74 mm, a width of 8 mm, a thickness of 1.2 mm and a tooth spacing of 4 mm. It is characterised by its wide application for working with softwood (5-50 mm), chipboard, carpentry plywood and fibreboard. Designed for fast and rough cutting.

1.50€

On request

Front-mounted nylon brush 65 mm, with 6 mm shank

02-57T419

The 65 mm nylon butt brush with 6 mm shank 57T419 by GRAPHITE is made of nylon. It has a maximum speed of 4,500 rpm. The product meets the requirements of EN 1083-2 and comes with a 6 mm shank, allowing it to work with any drill or screwdriver. The GRAPHITE nylon brush is a versatile product for many woodworking tasks.

6.70€

On request

Countersink drill 4/6 mm

02-54T400

GRAPHITE's 4/6 mm 54T400 confirmat drill bit characterised by an overall length of 75 mm and a working part length of 45 mm. Equipped with a cylindrical handle. Designed for drilling holes for confiirmate screws. GRAPHITE brand drills are useful in the toolbox of every DIY enthusiast.

4.50€

On request

Yellow sanding paper on roll 2.5 m x 115 mm, P40

02-58T420

GRAPHITE's yellow sanding paper in roll 2.5 m x 115 mm, P40, 58T420 is a product designed for sanding surfaces such as metal, wood, plastic and plasterboard. Made on a D-paper base, it is characterised by high durability and resistance to tearing. Thanks to its open grain, in which the surface is coated with 50-60% electro-corundum abrasive grain, the paper offers greater resistance to sanding dust clogging. It can be used for both hand and machine sanding - including with orbital sanders and gypsum sanding trowels.

1.80€

On request

Bit set 25 mm, with magnetic holder 60 mm, 100 pcs.

02-56T515

Bit set 25 mm, with magnetic holder 60 mm, 100 pcs. 56T515 by GRAPHITE consists of 100 pieces: bits H1.5/2/2.5/3/4/5/5.5/6/8/,1/16",5/64",3/32",7/64",1/8",9/64",5/32",3/16",7/32",1/4", HH2/2.5/3/4/5/6/,5/64", 3/32", 7/64", 1/8", 9/64", 5/32", SQ0/1/2/3, CG1/2/3, PH0/1/2/2/2/3, PZ0/1/2/2/2/2/3, SN4/6/8/10, T8/10/15/20/25/27/30/40/45, TW1/2/3/4, SP5/6/8, TT8/10/15/20/25/27/30/35/40, TS6/8/10, SL3/4/4.5/5/5.5/6/6.5/7/8 x 25 mm; a 60 mm magnetic holder, a hook screwdriver bit and adapters: a 1/4 "Hex to 1/4 square 25 mm adapter, a 1/4 "Hex to 1/4 square 50 mm adapter, a 1/4 "Hex to 1/4 square 25 mm adapter with internal socket. All bits are made from tough chrome vanadium steel (CrV) - ensuring versatility and adequate durability during use.

14.69€

On request

Jigsaw blade set, 6 TPI, 10 TPI, 12 TPI, 20 TPI, HCS, T-handle, 5 pcs

02-57T540

Jigsaw blade set, 6 TPI, 10 TPI, 12 TPI, 20 TPI, HCS, T-handle, 5 pcs. 57T540 by GRAPHITE is a set which includes: 1x 57T543 jigsaw blade, with 12 TPI tooth density, HCS material and T-type handle. Characterised by an overall length of 76 mm, a working length of 50 mm, a width of 5.2 mm, a thickness of 1 mm and a tooth pitch of 2 mm. Applications: softwood (2-15 mm), plywood, chipboard, carpentry plywood, fibreboard, for curved cuts, basic cutting. The GRAPHITE set also includes 1x 57T544 jigsaw blade, with a tooth density of 21 TPI, in HCS material and with a T-shaped handle. The 2 pieces in the set are characterised by an overall length of 76 mm, working length of 50 mm, width of 8 mm, thickness of 1 mm and tooth spacing of 1.2 mm. Application: thin sheet metal (1-3 mm), basic cutting. The set also offers 1x 57T545 jigsaw blade, with 6 TPI tooth density, in HCS material and with T-shaped handle. Tool with overall length 100 mm, working length 74 mm, width 8 mm, thickness 1.2 mm and tooth pitch 4 mm. Application: softwood (5-50 mm), chipboard, plywood, fibreboard, fast cutting, coarse cutting. Set also consists of 1x 57T546 jigsaw blade, tooth density 21 TPI, HCS material and T-shaped handle. Overall length 76 mm, working length 50 mm, width 8 mm, thickness 1 mm and tooth pitch 1.2 mm. Applications: softwood (1.5-15 mm), plywood, chipboard, carpentry plywood, fibreboard, basic cutting. The GRAPHITE brand set also offers 1x 57T549 jigsaw blade, with 10 TPI tooth density, HCS material and T-shaped handle. It features an overall length of 100 mm, a working length of 74 mm, a width of 8 mm, a thickness of 1.5 mm and a tooth spacing of 2.5 mm. Applications: softwood, chipboard, joinery plywood, fibreboard (3-30 mm), plastic/epoxy (diameter <30 mm), clean cutting.

3.20€

On request

Wood drill, extended 20 x 250 mm

02-54T572

The Wood Drill, Extended 20 x 250 mm 54T572 by GRAPHITE is a drill bit designed for working with wood and plywood and features a cylindrical chuck. It features a diameter of 20 mm and a length of 250 mm. Suitable for tasks with a maximum speed of 800 rpm. It will work well for many DIY tasks.

7.80€

On request

Glass drill 3 mm

02-54T411

GRAPHITE glass drill bit 3 mm 54T411 characterised by a diameter of 3 mm and an overall length of 67 mm. Equipped with a cylindrical shank of 2.8 mm. It will prove its worth when working with glass. GRAPHITE drill bit is recommended for DIY enthusiasts.

1.80€

On request

Milling cutter for wood with bearing, decorative, widia, 38.1 x 19mm, shank 8 mm

02-56T611

Wood router bit with bearing, decorative, widia, 38.1 x 19 mm, shank 8 mm 56T611 by GRAPHITE is a router bit with unscrewable bearing, with a blade diameter of 38.1 mm, a height of 19 mm and an overall length of 60 mm. Its radius is 12.7 mm. It is also equipped with an 8 mm long shank. The cutter is made of tungsten carbide (TCT), ensuring durability and precision. With two cutting edges, it is ideal for making straight grooves, grooves and slots. It enables the rounding of the edges of wood and wood-based materials, so is suitable for carpentry and furniture work.

8.39€

On request

Accessories

Power tool accessories

Mixing blades

Wire and nylon brushes

Solders

Threading accessories

Gas cartridges

Cutting and grinding discs

Drill bits and router bits

Cutting discs and blades

Turning tools

Chisels and spikes

Holesaws and adapters

Sandpapers

Bits and bits holders

DREMEL accessories

Welding materials and accessories

Soldering and gas accessories