GRAPHITE stone cutting disc allows to greatly reduce cutting time thanks to advanced design and reduced thickness. Product is compliant with EN12413, which ensures high safety at work.
Pin Connector Set, 43 pieces VERTO (ref. 60H285) is an offer for the beginner or intermediate DIY enthusiast, which will allow you to easily make connections in wood or wood-based materials. With this set it is possible to make holes with diameters: 6, 8 and 10 mm. The set includes: 3 pcs wood drill bits, 3 pcs depth stops, 6 pcs markers indicating the place of drilling, 30 pcs dowels of three different diameters (6, 8, 10 mm), hex key.
Cutting wheel, alumina for metal/INOX 125 x 1.6 x 22.2 mm, 41 A46-T-BF, 57T103 by GRAPHITE is an alumina wheel that is designed for cutting metal and stainless steel (INOX). Its dimensions are 125 x 1.6 x 22.2 mm. This model has a flat design and the designation 41 A46-T-BF. The thickness of the blade is 1.6 mm and the diameter of the mounting hole is 22.2 mm. The maximum speed is 12,200 rpm, corresponding to a speed of 80 m/s. The product complies with the EN 12413 standard.
Cutting wheel, corundum for metal 115 x 2.0 x 22.2 mm, 42 A46-T-BF, convex 57T118 by GRAPHITE is a convex wheel with a diameter of 115 mm, a thickness of 2 mm and a mounting hole of 22.2 mm. It features a maximum speed of 13,300 rpm, with an operating speed of 80 m/s. The product is designed for cutting metal. The GRAPHITE blade meets the requirements of EN 12413.
Cutting disc, corundum for metal/INOX 230 x 2.5 x 22.2 mm, 41 A30-S-BF, 57T104 by GRAPHITE is an alumina disc that is designed for cutting metal and stainless steel (INOX). Its dimensions are 230 x 2.5 x 22.2 mm. This model has a flat design and the designation 41 A30-S-BF. The thickness of the blade is 2.5 mm and the diameter of the mounting hole is 22.2 mm. The maximum speed is 6,600 rpm, which corresponds to a speed of 80 m/s. The product complies with the EN 12413 standard.
Cutting disc, alumina for concrete 115 x 2.0 x 22.2 mm, 42 C46-R-BF, convex 57T122 by GRAPHITE is a convex disc with a diameter of 115 mm, a thickness of 2 mm and a mounting hole of 22.2 mm. It features a maximum speed of 13,300 rpm, with an operating speed of 80 m/s. The product is designed for cutting concrete. The GRAPHITE blade meets the requirements of EN 12413.
GRAPHITE metal cutting disc thanks to advanced design and reduced thickness allows to greatly reduce cutting time. Product is compliant with EN12413, which ensures high safety at work.
Pocket jointing set, 5 pieces 55H251 by GRAPHITE is a comprehensive set of tools for drilling at an angle in various types of material. It consists of: pocket hole drill jig, 9.5 mm long two-stage drill bit, T20 torx bit, Allen spanner and drilling depth stop. It is recommended for many applications - both professional and domestic.
Perforated sanding discs 225 mm, P180, for sander 59G264, 59G265,5 pieces 55-781 by NEO TOOLS on Velcro, designed for working with plasterboard. The perforation works with dust extraction, which improves the visibility and cleanliness of the workplace when sanding plasterboard and joints. The set contains 5 NEO TOOLS discs and the diameter of 225 mm allows for efficient working of large surfaces. The discs are compatible with GRAPHITE's 59G264 and 59G265 drywall sanders.
Screwdriver bit PZ1 x 150 mm, 1/4" Hex 56-570 by NEO TOOLS is a PZ1 type bit with a length of 150 mm. Mounted on a ¼" HEX thread. It features high resistance to deformation and is recommended for high frequency work. The part is made of S2 steel. The tip is recommended for POZDIRIV type screws and will prove useful in every professional and DIY workshop.
Jigsaw blades, 8 TPI, HCS, T-handle, set of 2, clean cut 57-759 by NEO TOOLS are accessories with 8 TPI spacing and T-handle, offered in a set of 2. They are designed for clean cutting. Each blade has an overall length of 100mm, a working length of 74mm, a thickness of 1.5mm and a tooth spacing of 2.8mm. Applications include softwood, chipboard, carpenter's plywood, fibreboard 3-30mm thick, as well as plastics with a diameter of less than 30mm, allowing precise machining of common wood materials and selected plastics.
The 355 x 3.5 x 32 mm, 41 A24-R-BF, 57-712 metal cutting disc by NEO TOOLS is a 355 x 3.5 x 32 mm metal cutting disc for dry cutting. It is characterised by a maximum rotational speed of 4,400 rpm and a maximum peripheral speed of 80 m/s. Thanks to its advanced design and thickness, it allows a significant reduction in working time. It ensures a high level of safety thanks to compliance with the EN12413 standard. The NEO TOOLS brand disc is recommended for professionals and DIY enthusiasts.
HSS-Co 10.2 mm metal drill bit, 57-055 by NEO TOOLS is a deeply ground drill bit according to DIN 338 and made of M35 steel with 5% cobalt addition. It uses a tip angle of 135° and type C shear correction. It has a cylindrical handle. The length of the working part is 87 mm and its overall length is 133 mm. The maximum speeds are: INOX 350-390 rpm, general metals 700-780 rpm. The purpose of this drill bit by NEO TOOLS is drilling in demanding materials such as stainless, acid-resistant and heat-resistant steel.
The 125 mm 57-860 fibre disc by NEO TOOLS is a disc designed for angle grinders with an M14 thread attachment. Its maximum rotational speed is 12,200 rpm. The disc is a work pad for 125 mm fibre discs and is compatible with products with part number: 55-855, 55-856, 55-857, 55-858, 55-859.The NEO TOOLS brand offers a wide range of power tools and accessories for professional users.
Velcro sanding paper, iron 80 x 140 mm, P60, 5 pcs, with 11 holes for 59G336, 54-010 by NEO TOOLS with dimensions 80 x 140 mm. It is characterised by gradation P60, and is intended for delta-type orbital sanders (e.g. GRAPHITE 59G336 grinder). The paper is recommended for use with wood, metal and plastic. The Velcro attachment facilitates efficient and quick changes. The paper has 11 dust extraction holes, offering comfortable dust-free working and therefore more efficient sanding without overheating the material. The set of 5 sanding papers 80 x 140 mm NEO TOOLS is recommended for professionals and experienced DIY enthusiasts.
The diamond blade 250 x 25.4 mm, solid 57-645 by NEO TOOLS with a blade diameter of 250 mm and a mounting hole diameter of 25.4 mm, is designed for trimming machines. Due to its hot-pressed continuous segment, it is ideal for heavy and demanding construction work. The robust diamond segment with a height of 6 mm and a thickness of 2.7 mm makes it possible to cut ceramic elements, such as terracotta, among others. The NEO TOOLS blade is recommended for wet cutting at a maximum speed of 6,100 rpm.
Impact bits TX40 x 50 mm, 2 pieces 56-529 by NEO TOOLS type TX 40 with a length of 50 mm. Equipped with a ¼" HEX handle and recommended for heavy work with high torque, using screwdrivers or impact drivers. The impact bits are made from durable S2 steel. 2 pieces are offered in the set - for professionals and DIY enthusiasts.
TX30 x 25 mm impact bits, 2 pieces 56-516 by NEO TOOLS type TX30, 25 mm long. Equipped with a ¼" HEX handle and recommended for heavy work with high torque, using screwdrivers or impact drivers. The impact bits are made from durable S2 steel. 2 pieces are offered in the set - for professionals and DIY enthusiasts.
Velcro-mounted delta sanding paper 93 x 93 mm P60, 5 pieces, with holes 55-764 by NEO TOOLS is a Velcro-mounted sanding paper that is designed for working with metal, wood and plastic materials. The sheets are characterised by holes with a diameter of 8 mm, facilitating work with dust extraction. These accessories use an electro-corundum grain and semi-open mesh, which reduces clogging when roughing. The backing is E-type paper, providing the correct stiffness and stable pressure on the surface. The set contains 5 delta sanding papers from NEO TOOLS.
