Metal cutting disc 180 x 1,6 x 22,2 mm, 41 A 46-S-BF, 57-718 by NEO TOOLS is a metal cutting disc with parameters 180 x 1,6 x 22,2 mm. The product is intended for dry metal cutting. It is characterised by a maximum rotational speed of 8 400 rpm and a maximum peripheral speed of 80 m/s. Thanks to its advanced design, it significantly reduces working time. It ensures a high level of safety thanks to compliance with the EN12313 standard. The NEO TOOLS brand disc is recommended for professionals and DIY enthusiasts.
The SDS Max adapter and pilot drill bit for M22 threaded holesaws 190 mm 55-332 by NEO TOOLS is a set of SDS Max adapter and pilot drill bit, designed for a variety of construction and repair tasks in concrete. The adapter is characterised by an overall length of 190 mm. The drill bit, on the other hand, is 110 mm long and has a diameter of 8 mm. NEO TOOLS tool recommended for professionals as well as DIY enthusiasts.
SDS Max 18 x 25 x 350 mm chisel, U type blade, 57-564 by NEO TOOLS is a chisel with a blade width of 25 mm, an overall length of 350 mm and a diameter of 18 mm. Designed for work in concrete. Equipped with a U-type blade. The NEO TOOLS brand chisel is compatible with chiseling/drilling hammers with SDS Max handle.
The SDS Plus 16 x 260 mm, quatro 54-133 reinforced concrete drill bit by NEO TOOLS is an accessory characterised by a diameter of 12 mm and an overall length of 260 mm and a working length of 190 mm. Equipped with an SDS Plus handle, double helix and QUATRO fork (four cross-set forks), it is ideal for working in reinforced concrete. The cross-cut bit is made of fine-grain carbide. This robust tool from NEO TOOLS is recommended for intensive use by professionals.
The SDS Plus 12 x 450 mm, quatro 54-121 reinforced concrete drill bit by NEO TOOLS is an accessory characterised by a diameter of 12 mm and an overall length of 450 mm and a working length of 380 mm. Equipped with an SDS Plus handle, double helix and QUATRO fork (four cross-set forks), it is ideal for working in reinforced concrete. The cross-cut bit is made of fine-grain carbide. This robust tool from NEO TOOLS is recommended for intensive use by professionals.
The SDS Plus 14 x 450 mm, quatro 54-129 reinforced concrete drill bit by NEO TOOLS is an accessory characterised by a diameter of 12 mm and an overall length of 450 mm and a working length of 380 mm. Equipped with an SDS Plus handle, double helix and QUATRO fork (four cross-set forks), it is ideal for working in reinforced concrete. The cross-cut bit is made of fine-grain carbide. This robust tool from NEO TOOLS is recommended for intensive use by professionals.
TX15 x 25 mm impact bits, 2 pieces 56-512 by NEO TOOLS type TX15, 25 mm long. Equipped with a ¼" HEX handle and recommended for heavy work with high torque, using screwdrivers or impact drivers. The impact bits are made from durable S2 steel. 2 pieces are offered in the set - for professionals and DIY enthusiasts.
Flap wheel 115 x 22.2 mm, P100, zirconia 57-838 by NEO TOOLS is an accessory with a diameter of 115 mm and gradation P100, with a mounting hole of 22.2 mm, designed for grinding metal - including stainless and acid-resistant steel (INOX). The fan-shaped, radial flap arrangement with full grit (100% zirconia grain coverage) on an X-type cloth base ensures a high stock removal rate and stable guidance in machine work. The zirconia grain has a self-sharpening effect, thus extending the life of the tool in intensive work. The maximum speed is 13,300 rpm and the permissible linear speed is 80 m/s.
HSS-CNC metal drill bit, 124°, "Pro-Tec", 3.2 mm 55-015 by NEO TOOLS is deeply ground according to DIN 338 and made of M2 steel. The 124° tip geometry with E-type shear correction facilitates spotless drilling and stable tool guidance. The length of the working part is 36 mm, the overall length is 65 mm - the recommended maximum speed is 1900 rpm. NEO TOOLS drill bit is intended for drilling in steel, cast iron, non-ferrous metals (copper, aluminium, brass) and plastics.
NEO TOOLS' 40 mm diameter bi-metal hole saw 57-918 allows precise drilling of holes with a maximum depth of up to 38 mm. Equipped with teeth with a 6/4 TPI pitch, it is suitable for working with various materials. The maximum speeds are: steel - 550 rpm, copper - 730 rpm, aluminium - 825 rpm, stainless steel - 275 rpm, plastic - 2250 rpm, wood - 3000 rpm. This is a versatile tool for professional and amateur use.
The SDS Plus 12 x 210 mm, quatro 54-117 reinforced concrete drill bit by NEO TOOLS is an accessory characterised by a diameter of 12 mm and an overall length of 210 mm and a working length of 140 mm. Equipped with an SDS Plus handle, double helix and QUATRO fork (four cross-set forks), it is ideal for working in reinforced concrete. The cross-cut bit is made of fine-grain carbide. This robust tool from NEO TOOLS is recommended for intensive use by professionals.
The saw blade, widia, 210 x 30 mm, 100 teeth, for aluminium 55-610 by NEO TOOLS is equipped with 100 teeth, 2.4 mm x 1.6 mm, made of TCT carbide. The TCG tooth, with its special geometry and wide comb section, guarantees increased load resistance. The NEO TOOLS brand disc in manganese steel MN65 reaches a maximum speed of up to 9,000 rpm. Three rings are included, allowing reduction to dimensions: 30 x 25.4 mm, 30 x 20 mm and 30 x 16 mm. The NEO TOOLS blade is designed for cutting aluminium profiles and other non-ferrous metals. The tool ensures clean and precise work.
Impact bits TX25 x 50 mm, 2 pieces 56-526 by NEO TOOLS type TX 25 with a length of 50 mm. Equipped with a ¼" HEX handle and recommended for heavy work with high torque, using screwdrivers or impact drivers. The impact bits are made from durable S2 steel. 2 pieces are offered in the set - for professionals and DIY enthusiasts.
Flap wheel 115 x 22.2 mm, P40, 55-981 by NEO TOOLS is a 115 mm diameter, P40 gradation accessory with a 22.2 mm mounting hole, designed for efficient grinding of metal and wood with angle grinders. The fan-shaped, radial arrangement of the abrasive cloth leaves increases the efficiency of stock removal, while the C-type cloth base, adapted for machine sanding, provides stable pressure during use. It uses a solid coating (100% grain coverage, electro-corundum), which promotes service life and an even surface finish. The maximum speed is 13,300 rpm and the permissible linear speed is 80 m/s.
Screwdriver bit PZ2 x 300 mm, 1/4" Hex 56-573 by NEO TOOLS is a PZ2 type bit with a length of 300 mm. Mounted on a ¼" HEX thread. It features high resistance to deformation and is recommended for high frequency work. The component is made of S2 steel. The tip is recommended for POZDIRIV type screws and will prove useful in every professional and DIY workshop.
Flap wheel, 40 x 20 mm, P80, 55-756 by NEO TOOLS is a grinding wheel with a diameter of 40 mm and a working height of 20 mm, fitted with a 6 mm diameter shank. The maximum rotational speed is 19,100 rpm and the permissible linear speed is 80 m/s. The tool is designed for machining metal, plastics and wood. The abrasive cloth flap design (X-type base) ensures even stock removal in grinding and stable guidance on edges and profiled surfaces.
Screwdriver bit PH3 x 150 mm, 1/4" Hex 56-579 by NEO TOOLS is a PH3 type bit with a length of 150 mm. Mounted on a ¼" HEX thread. It features high resistance to deformation and is recommended for high frequency work. The component is made from S2 steel. The tip is recommended for POZDIRIV screws and will prove useful in every professional and DIY workshop.
The HSS-CNC metal drill bit, 124°, "Pro-Tec", 8.5 mm 55-030 by NEO TOOLS is deeply ground according to DIN 338 and made of M2 steel. The 124° tip geometry with E-type shear correction facilitates drilling without scoring and stable tool guidance. The length of the working part is 75 mm, the overall length is 117 mm - the recommended maximum speed is 800 rpm. NEO TOOLS drill bit is intended for drilling in steel, cast iron, non-ferrous metals (copper, aluminium, brass) and plastics.
Flap wheel 125 x 22.2 mm, P80, zirconia 57-843 by NEO TOOLS is a 125 mm diameter, P80 gradation accessory with a 22.2 mm mounting hole, designed for grinding metal - including stainless steel and acid-resistant steel (INOX). The fan-shaped, radial flap arrangement with full grit (100% zirconia grain coverage) on an X-type cloth base ensures a high stock removal rate and stable guidance in machine work. The zirconia grain has a self-sharpening effect, thus extending the life of the tool in intensive work. The maximum speed is 12,250 rpm and the permissible linear speed is 80 m/s.
Sanding paper 115 x 160 mm, holes, tear-off perforation, Velcro, P100, 3 pieces 55-818 by NEO TOOLS is a Velcro-fixed paper that comes in a set of 3 and is equipped with 8 holes with a diameter of 8 mm each. It allows working with dust extraction. The tear-off perforation allows you to quickly fit the sheet to your work foot or shorten it to the required format without tools. Graduation P100 works well for specific machining and applications include metal, wood and plastic materials.
