Diamond holesaws (18, 22, 27, 35 mm), 4-piece set 55-318 by NEO TOOLS is a set of four holesaws with diameters: 18, 22, 27, 35 mm, which are made of robust C45 steel. They are characterised by a maximum drilling depth of 30 mm and a speed of up to 13,300 revolutions per minute. With an M14 chuck and HV hardness of 175-200, they are versatile in use. They work best with ceramics, stoneware, concrete, clinker and stone. The D46 grit size and 10 mm diamond coating height ensure clean and precise cutting even in demanding conditions. The NEO TOOLS diamond holesaw set is recommended for professionals as well as DIY enthusiasts.
Abrasive sponge 98 × 25 × 68 mm, P80, bevelled, 55-925 by NEO TOOLS is a 98 × 25 × 68 mm tool with gradation P80, designed for working with metal, plastics and wood. The flexible backing and slanted profile allow even sanding of flat surfaces, edges and corners. The 98 × 68 mm format provides a comfortable grip when working by hand. The P80 model from NEO TOOLS proves its worth for many sanding tasks.
The saw blade, widia, 235 x 30 mm, 48 teeth 55-693 by NEO TOOLS is equipped with 48 teeth, 2.8 mm x 2 mm, made of tungsten carbide. The ATB tooth, with its special alternate geometry, guarantees increased cutting accuracy. The NEO TOOLS brand MN65 manganese steel disc has a maximum speed of up to 7,500 rpm. Three rings are included, allowing reduction to dimensions: 30 x 25.4 mm, 30 x 20 mm and 30 x 16 mm. The NEO TOOLS blade is designed for cutting wood, wood-based materials, plywood, laminates, MDF. The tool ensures clean and precise work.
The saw blade, widia, 235 x 30 mm, 100 teeth, for aluminium 55-695 by NEO TOOLS is equipped with 100 teeth, 2.8 mm x 2 mm, made of TCT carbide. The TCG tooth, with its special geometry and wide comb section, guarantees increased load resistance. The NEO TOOLS brand disc in manganese steel MN65 reaches a maximum speed of up to 7,500 rpm. Three rings are included, allowing reduction to dimensions: 30 x 25.4 mm, 30 x 20 mm and 30 x 16 mm. The NEO TOOLS blade is designed for cutting aluminium profiles and other non-ferrous metals. The tool ensures clean and precise work.
The SDS Plus 14 x 1000 mm, quatro 54-131 reinforced concrete drill bit by NEO TOOLS is an accessory characterised by a diameter of 12 mm and an overall length of 1000 mm and a working length of 930 mm. Equipped with an SDS Plus handle, double helix and QUATRO fork (four cross-set forks), it is ideal for working in reinforced concrete. The cross-cut bit is made of fine-grain carbide. This robust tool from NEO TOOLS is recommended for intensive use by professionals.
Velcro-backed abrasive discs 125 mm, P240, 5 pcs, with 8 holes 55-944 by NEO TOOLS with a diameter of 125 mm and gradation P240. The package contains five discs. The accessories have 8 practical holes with a diameter of 10 mm, with a diameter between the centres of the holes of 65 mm. Velcro discs from NEO TOOLS are made of type E paper. They are characterised by a half-open grain and grain made of electro-corundum. They will be suitable both for professional use and during DIY tasks, in metal, plastic and wood.
HSS-Co 12.0 mm metal drill bits, 5 pcs. 57-062-5 by NEO TOOLS are deep ground drills according to DIN 338 and made of M35 steel with 5% cobalt addition. They use a tip angle of 135° and type C shear correction. They have a cylindrical handle. The length of the working part is 101 mm and their overall length is 151 mm. The maximum speeds are: INOX 300-325 rpm, general metals 600-650 rpm. The purpose of this set by NEO TOOLS is to drill in demanding materials such as stainless, acid-resistant and heat-resistant steel.
Waterproof sanding paper 230 × 280 mm, P1500, 55-909 by NEO TOOLS is a waterproof paper, 230 × 280 mm and gradation P1500, which is designed for wet sanding. The sheet allows finishing dulling and removal of minor irregularities from the surface. Its applications include: metal, wood, plastics and glass. Sanding with water reduces clogging of the grain and promotes an even machining effect. Sanding paper by NEO TOOLS is a proven solution for many tasks.
The 200 x 25.4 mm, segmented 57-870 diamond disc by NEO TOOLS with a diameter of 200 mm and a mounting hole of 25.4 mm is designed for dry work in concrete. Equipped with segments of 8 mm height and 2.5 mm thickness, it ensures effective cutting with adequate guidance stability. The NEO TOOLS blade is designed to operate at a maximum speed of 7,600 rpm and a peripheral speed of 80 m/s.
The stone cutting disc 115 x 1.6 x 22.2 mm, 41 C 46-R-BF, 57-720 by NEO TOOLS is a 115 x 1.6 x 22.2 mm disc. The product is intended for dry stone cutting. It is characterised by a maximum rotational speed of 13 200 rpm and a maximum peripheral speed of 80 m/s. Thanks to its advanced design, it significantly reduces working time. It ensures a high level of safety thanks to compliance with the EN12313 standard. The NEO TOOLS brand disc is recommended for professionals and DIY enthusiasts.
Saw blade, widia, 250 x 30 mm, 100 teeth, for aluminium 55-611 by NEO TOOLS is equipped with 100 teeth, 2.8 mm x 2 mm, made of TCT carbide. The TCG tooth, with its special geometry and wide comb section, guarantees increased load resistance. The NEO TOOLS brand disc in manganese steel MN65 reaches a maximum speed of up to 8,000 rpm. Three rings are included, allowing reduction to dimensions: 30 x 25.4 mm, 30 x 20 mm and 30 x 16 mm. The NEO TOOLS blade is designed for cutting aluminium profiles and other non-ferrous metals. The tool ensures clean and precise work.
Impact bits PZ4 x 25mm, 2 pieces 56-506 by NEO TOOLS are impact bits PZ4, 25mm long. Supplied in a set of 2 pieces. Made from S2 steel, they are suitable for impact work. They have a 1/4" HEX shank. They will work well in professional and DIY tasks.
The HSS-CNC metal drill bit, 124°, "Pro-Tec", 8.0 mm 55-029 by NEO TOOLS is deeply ground according to DIN 338 and made of M2 steel. The 124° tip geometry with E-type shear correction facilitates drilling without scoring and stable tool guidance. The length of the working part is 75 mm, the overall length is 117 mm - the recommended maximum speed is 1000 rpm. NEO TOOLS drill bit is intended for drilling in steel, cast iron, non-ferrous metals (copper, aluminium, brass) and plastics.
NEO TOOLS' 86 mm diameter bi-metal hole saw 57-913 allows precise drilling of holes with a maximum depth of up to 38 mm. Equipped with teeth with a 6/4 TPI pitch, it is suitable for working with a variety of materials. Maximum speeds are: steel - 105 rpm, copper - 140 rpm, aluminium - 155 rpm, stainless steel - 40 rpm, plastic - 1100 rpm, wood - 1500 rpm. This is a versatile tool for professional and amateur use.
Velcro sanding paper 115 x 230 mm, P120, 5 pcs, with holes 54-005 by NEO TOOLS with dimensions 115 x 230 mm. It is characterised by gradation P120 and is intended for orbital sanders (e.g. GRAPHITE 59G239 grinder). The paper is recommended for use with wood, metal and plastic. The Velcro fastening facilitates efficient and quick exchange. NEO TOOLS paper has 10 dust extraction holes, offering comfortable dust-free working and thus more efficient sanding without overheating the material. The set of 5 sanding papers 115 x 230 mm is recommended for professionals and experienced DIY enthusiasts.
The 70 × 25 × 100 mm, P180, 55-920 abrasive sponge by NEO TOOLS is a 70 × 25 × 100 mm tool with gradation P180, designed for working with metal, plastics and wood. The flexible backing allows even sanding of flat and profiled surfaces, and the 70 × 25 mm format provides a comfortable grip when working by hand. The P180 model from NEO TOOLS is suitable for intermediate and finishing sanding.
The SDS Max grooved self-sharpening pick 18 x 600 mm 57-548 by NEO TOOLS is a self-sharpening pick with a diameter of 18 mm and an overall length of 600 mm. It is designed for work in concrete. The design with an SDS Max shank ensures proper attachment to tools compatible with this system, while the grooved profile and self-sharpening tip promote the maintenance of forging efficiency during use.
Endless belts 75 x 457 mm, P60, 3 pieces 55-788 by NEO TOOLS is a set of 3 abrasive belts designed for metal, wood and plastic processing. They use electrocorundum as the grain and the backing is a tough X-type canvas, suitable for machine sanding. The semi-open grain reduces clogging and promotes uniform stock removal. The 75 × 457 mm dimensions ensure compatibility with popular belt sanders.
Set of SDS Plus concrete drill bits, quatro, set of 5 pieces - 5,6 x 100 mm + 8,10, 12 x 160 mm 57-572 by NEO TOOLS are cross-tipped drill bits made of fine-grain carbide. The double S4 helix ensures that they have proper excavation and reduces the risk of overheating. The drill bits have working lengths of 5:50 mm, 6:50 mm, 8:100 mm, 10:100 mm, 12:100 mm and overall lengths of 5:110 mm, 6:110 mm, 8:160 mm, 10:160 mm, 12:160 mm. The accessories have an SDS Plus handle. Their intended use is concrete, brick, masonry and stone. NEO TOOLS drill bits set recommended for use with hammer drills and impact hammers.
The SDS Plus 14 x 260 mm, quatro 54-125 reinforced concrete drill bit by NEO TOOLS is an accessory characterised by a diameter of 12 mm and an overall length of 260 mm and a working length of 190 mm. Equipped with an SDS Plus handle, double helix and QUATRO fork (four cross-set forks), it is ideal for working in reinforced concrete. The cross-cut bit is made of fine-grain carbide. This robust tool from NEO TOOLS is recommended for intensive use by professionals.
