AIRCRAFT Compressed Air Equipment and Workshop Technology at Hammerjack
Hammerjack is an official importer of AIRCRAFT products. AIRCRAFT is a German quality brand within the Stürmer Maschinen Group, specialising in professional compressed air equipment, air compressors and workshop technology. AIRCRAFT products are trusted by industrial companies, automotive workshops, manufacturing facilities and professional tradespeople throughout Europe.
The AIRCRAFT product range includes piston compressors, screw compressors, air receivers, compressed air treatment equipment, pneumatic tools, hose reels, filters, air dryers, pressure regulators and other compressed air system components. All products are designed to deliver reliability, energy efficiency and a long service life.
Professional Compressed Air Solutions
Whether for a small workshop, an automotive repair shop or a large manufacturing facility, AIRCRAFT provides dependable compressed air systems designed for efficient and continuous operation.
Why Choose AIRCRAFT?
Official importer of AIRCRAFT products.
German-quality compressors and compressed air equipment.
Complete compressed air system solutions.
Reliable, energy-efficient performance.
Solutions for industry, workshops and manufacturing.
German Quality for Professionals
AIRCRAFT combines modern technology, premium components and durable engineering to deliver professional compressed air solutions for demanding working environments.
Flow-optimized air supply for up to 75% less resistance
Assembly of the filter elements without cross-sectional narrowing and disturbing tie rods, thus reduced flow resistance and easy element change even in confined spaces
Cavity volume of the borosilicate filter material of 96% ensures the lowest pressure loss
CLEARPOINT® filter housing made of water-resistant aluminum and additionally anodised on the inside, therefore increased operational safety and reduced flow resistance due to permanently smooth inner surfaces
100% control when opening the filter housing by a secure locking mechanism, when opened under pressure a warning signal sounds
With thermally highly resistant (up to 120 ° C), mechanically highly resistant, chemically resistant and silicone-free needle felt drainage layer (in contrast to foam material of other filter makes)
Stable construction of the filter element - it is not possible to inflate or rupture the drainage layer, thereby ensuring the constant use of the entire filter surface
for the separation of oil vapors, odors and flavorings via adsorption and in the second stage of solid particles
Residual content of oil vapor up to 0.003 mg / m³ at 20 ° C and 1 bar
absolute compressed air quality according to ISO 8573-1
For compressed air of the highest quality, eg, for breathing air, in analytical technology or semi-luxury bottling
Pure compressed air in connection with upstream ultrafine filter
Compressed air filters are used for highly efficient removal of solid particles, water, oil, aerosols, hydrocarbons, odors and vapors from compressed air systems.
To achieve the required quality of compressed air, filters that gradually remove all types of solid and liquid contaminants from the compressed air must be installed in the compressed air line
Your advantages through better quality compressed air:
Safe filtration of both liquids such as water and aerosols as well as particles, dust and gases
Better working and production conditions
Optimum protection of connected tools and machines
Improved product quality through reduction of rejects
Protection of the compressed air system against contamination
Increase of productivity by reduction of instant maintenance
for separating solid contaminants up to 0.01μm
Residual oil aerosol content up to 0.01 mg / m³ at 20 ° C and 1 bar
Operating temperature 1.5 to 65 ° C
absolute compressed air quality according to ISO 8573-1
for safe separation of condensate and particles
complete with filter element and float valve
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Sintered filter with centrifugal principle, diaphragm pressure regulator with secondary venting and normal mist lubricator with post-suction device under pressure
For compressed air and neutral gases
Filter pressure regulator with semi-automatic condesate drain
Secured via lockable handwheel
For vertical installation
Sintered filter with centrifugal principle, diaphragm pressure regulator with secondary venting and normal mist lubricator with suction device under pressure
For compressed air and neutral gases
Filter pressure regulator with semi-automatic condesate drain
Safety via lockable handwheel
Fog lubricator for oil type CL 32 according to DIN 51517-ISO VG 32 - oil refill under pressure up to max. 10 bar possible
Input pressure 1, 5 - 16 bar
Suitable for temperatures from -10 to +50°C
For vertical installation
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Integrated DRYPOINT M Plus solution: filtration and dryer in a compact form, as well as condensate drain integrated
Filtration on the spot in the treatment chain where the highest efficiency is achieved
Easy maintenance / replacement of filter element as with a filter
Application-specific degree of dryness can be selected
Consistent compressed air quality under fluctuating operating conditions
Energy saving through minimization of purging air consumption for actual amount of useful air and degree of drying
Power evaluation via LED, forwarding via current output 4 … 20 mA possible
User-friendly: Easy to use, test functions, error messages
Concept based on the fail-safe principle, error message can be picked up via potential-free contact
Functionality of the DRYPOINT® M eco control
Based on the measurement result from the sensor, the control software decides in defined cycles whether and how long the full amount of purge air has to be provided to achieve and stabilize the required degree of dryness. This process is implemented by means of a targeted clocking of a solenoid valve. In each cycle, the duration of the two process sections described below varies in order to keep the degree of drying within the specified tolerance range.
EasyTRONIC MICRO II electronic control with pressure sensor operation as standard, thus preventing motor overload, reducing wear and extending service life
With star-delta switch
High cooling effect and lower noise level due to thermostatically controlled radial fan
Operating hours counter records load and overrun times, thus ensuring compliance with maintenance intervals - Indication of maintenance requirements via automatic message
Rotation direction control for the motor avoids possible damage during commissioning or after a change of location
Screw compressor with wear-resistant Poly V ribbed belt drive and slide clamping system
Easy maintenance due to easily accessible elements
Optimum operating temperatures due to thermostatically controlled fan, optimum cooling air flow and generously dimensioned heat exchanger, thus longer service life, lower fluctuations in oil temperature than with thermostat control
Aftercooler as standard, thus less effort for drying and filtration of the generated compressed air
Small external dimensions, thus easy transport and installation
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
All main components of the compressor are manufactured by machining using numerically controlled machine tools, including suction regulator, separator block and minimum pressure valve
The cooling takes place via a temperature-controlled centrifugal fan and an oversized combination cooler. This ensures optimal cooling even under the most extreme conditions.
Generous access panels allow easy maintenance and immediate control of the internal components, reducing the time required for inspection and maintenance to one medium.
The main operating parameters are monitored by the electronic microprocessor control NRG: In addition to the various functions, a weekly timer for switching on and off is available to meet the requirements of each customer. In addition, up to 4 machines can be controlled simultaneously according to the master / slave principle.
Standard with star-delta connection
Energy savings through frequency-controlled compressors Reducing energy consumption and protecting our precious energy resources has become a global challenge given its impact on the environment. The A-PLUS 22, 37, 55 and 75 kW range is also available in a speed control version that combines high performance with energy saving solutions. By using a variable speed compressor in a typical installation, you save a significant amount of energy. Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
All main components of the compressor are manufactured by machining using numerically controlled machine tools, including suction regulator, separator block and minimum pressure valve
The cooling takes place via a temperature-controlled centrifugal fan and an oversized combination cooler. This ensures optimal cooling even under the most extreme conditions.
Generous access panels allow easy maintenance and immediate control of the internal components, reducing the time required for inspection and maintenance to one medium.
The main operating parameters are monitored by the electronic microprocessor control NRG: In addition to the various functions, a weekly timer for switching on and off is available to meet the requirements of each customer. In addition, up to 4 machines can be controlled simultaneously according to the master / slave principle.
Standard with star-delta connection
Energy savings through frequency-controlled compressors Reducing energy consumption and protecting our precious energy resources has become a global challenge given its impact on the environment. The A-PLUS 22, 37, 55 and 75 kW range is also available in a speed control version that combines high performance with energy saving solutions. By using a variable speed compressor in a typical installation, you save a significant amount of energy. Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
