The 125 x 22.2 mm, P80, 55-989 flap wheel by NEO TOOLS is a 125 mm diameter, P80 gradation accessory with a 22.2 mm mounting hole, designed for efficient grinding of metal and wood with angle grinders. The fan-shaped, radial arrangement of the abrasive cloth leaves increases the efficiency of stock removal, while the C-type cloth base, adapted for machine sanding, provides stable pressure during use. It uses a solid coating (100% grain coverage, electro-corundum), which promotes service life and an even surface finish. The maximum speed is 12,250 rpm and the permissible linear speed is 80 m/hr.
Flap wheel, 40 x 20 mm, P40, 55-754 by NEO TOOLS is a grinding wheel with a diameter of 40 mm and a working height of 20 mm, fitted with a 6 mm diameter shank. The maximum rotational speed is 19,100 rpm and the permissible linear speed is 80 m/s. The tool is designed for machining metal, plastics and wood. The abrasive cloth flap design (X-type base) ensures even stock removal in grinding and stable guidance on edges and profiled surfaces.
Flap wheel 115 x 22.2 mm, P80, zirconia 57-837 by NEO TOOLS is a 115 mm diameter, P80 gradation accessory with a 22.2 mm mounting hole, designed for grinding metal - including stainless steel and acid-resistant steel (INOX). The fan-shaped, radial flap arrangement with full grit (100% zirconia grain coverage) on an X-type cloth base ensures a high stock removal rate and stable guidance in machine work. The zirconia grain has a self-sharpening effect, thus extending the life of the tool in intensive work. The maximum speed is 13,300 rpm and the permissible linear speed is 80 m/s.
Grinding Tape 6,3 mm, P60, P80, P120, P240, set of 100 pieces, + shank 3,2 mm, 2 pieces 55-076 by NEO TOOLS includes 102 pieces for precision machining of metal, wood, ceramics, glass and plastics. The set includes tapes with a diameter of 6.3 mm and a working height of 13 mm in gradations: 25 x P60, 25 x P80, 25 x P120 and 25 x P240, made of aluminium oxide, provide good cutting aggressiveness and a durable grain. The set is completed with 2 NEO TOOLS arbors with a diameter of 3.2 mm, suitable for use with typical rotary tools. The selection of several grits in one set allows for both coarse grinding and fine surface finishing. The NEO TOOLS brand set will prove useful in workshop, service and precise DIY.
Flap wheel 115 x 22.2 mm, P60, zirconia 57-836 by NEO TOOLS is an accessory with a diameter of 115 mm and gradation P60, with a mounting hole of 22.2 mm, designed for grinding metal - including stainless and acid-resistant steel (INOX). The fan-shaped, radial flap arrangement with full grit (100% zirconia grain coverage) on an X-type cloth base ensures a high stock removal rate and stable guidance in machine work. The zirconia grain has a self-sharpening effect, thus extending the life of the tool in intensive work. The maximum speed is 13,300 rpm and the permissible linear speed is 80 m/s.
The 355 x 3 x 25.4 mm, 41 A24-S-BF, 57-738 metal cutting disc by NEO TOOLS is a 355 x 3 x 25.4 mm metal cutting disc for dry cutting. It is characterised by a maximum rotational speed of 4,400 rpm and a maximum peripheral speed of 80 m/s. Thanks to its advanced design and thickness, it allows a significant reduction in working time. It ensures a high level of safety thanks to compliance with the EN12313 standard. The NEO TOOLS brand disc is recommended for professionals and DIY enthusiasts.
The 125 x 22.2 mm, P120 flap wheel, 55-991 by NEO TOOLS is a 125 mm diameter, P120 gradation accessory with a 22.2 mm mounting hole, designed for efficient grinding of metal and wood with angle grinders. The fan-shaped, radial arrangement of the abrasive cloth flaps increases the efficiency of stock removal, while the C-type cloth base, adapted for machine sanding, provides stable pressure during use. It uses a solid coating (100% grain coverage, electro-corundum), which promotes service life and an even surface finish. The maximum speed is 12,250 rpm and the permissible linear speed is 80 m/s.
Flap wheel 125 x 22.2 mm, P120, zirconia 57-845 by NEO TOOLS is a 125 mm diameter, P120 gradation accessory with a 22.2 mm mounting hole, designed for grinding metal - including stainless steel and acid-resistant steel (INOX). The fan-shaped, radial flap arrangement with full grit (100% zirconia grain coverage) on an X-type cloth base ensures a high stock removal rate and stable guidance in machine work. The zirconia grain has a self-sharpening effect, thus extending the life of the tool in intensive work. The maximum speed is 12,250 rpm and the permissible linear speed is 80 m/s.
Flap wheel 115 x 22.2 mm, P80, 55-983 by NEO TOOLS is a 115 mm diameter, P80 gradation accessory with a 22.2 mm mounting hole, designed for efficient grinding of metal and wood with angle grinders. The fan-shaped, radial arrangement of the abrasive cloth leaves increases the efficiency of stock removal, while the C-type cloth base, adapted for machine sanding, provides stable pressure during use. It uses a solid coating (100% grain coverage, electro-corundum), which promotes service life and an even surface finish. The maximum speed is 13,300 rpm and the permissible linear speed is 80 m/s.
NEO TOOLS diamond blade 180 x 22,2 mm, turbo wave 57-636 by NEO TOOLS of the turbo wave type with a diameter of 180 mm and a mounting hole of 22,2 mm is designed for dry and wet cutting of concrete. Equipped with a segment of 6 mm height and 2.8 mm thickness, it ensures effective surface processing. The NEO TOOLS disc meets the requirements of EN 13236 and is designed to operate at a maximum speed of 8,500 rpm and a peripheral speed of 80 m/s, making it safe for use with compatible angle grinders. The turbo wave diamond disc is distinguished by its corrugated body, which improves cooling and spoil removal during cutting. As a result, it works more stably, heats up more slowly and has a longer service life, especially when cutting concrete intensively.
The 400 x 4 x 32 mm, 41 A24-S-BF, 57-713 metal cutting disc by NEO TOOLS is a 400 x 4 x 32 mm metal cutting disc designed for dry work. It is characterised by a maximum rotational speed of 5,100 rpm and a maximum peripheral speed of 80 m/s. Thanks to its advanced design and thickness, it allows a significant reduction in working time. It ensures a high level of safety thanks to compliance with the EN12313 standard. The NEO TOOLS brand disc is recommended for professionals and DIY enthusiasts.
The 150 x 20/16/12.7 x 20 mm sanding discs, 2 pieces 61-605 by NEO TOOLS, measuring 150 x 20 x 20 mm, are available in a set of 2 pieces and come with two reductions: from 20 to 16 mm and from 16 to 12.7 mm. The P60 grit allows for effective machining and smoothing of various surfaces and the maximum speed is 4,450 rpm and will work well for many tasks. NEO TOOLS discs are compatible with the GRAPHITE 59G383 bench grinder.
The 125 x 22.2 mm, P36 flap wheel, 55-986 by NEO TOOLS is a 125 mm diameter, P36 gradation accessory with a 22.2 mm mounting hole, designed for efficient grinding of metal and wood with angle grinders. The fan-shaped, radial arrangement of the abrasive cloth leaves increases the efficiency of stock removal, while the C-type cloth base, adapted for machine sanding, provides stable pressure during use. It uses a solid coating (100% grain coverage, electro-corundum), which promotes service life and an even surface finish. The maximum speed is 12,250 rpm and the permissible linear speed is 80 m/s.
NEO TOOLS' 200 x 25,4 mm, turbo type diamond disc 57-871 with a diameter of 200 mm and a mounting hole of 25,4 mm is designed for dry and wet cutting of concrete. Equipped with a segment of 6 mm height and 2.8 mm thickness, it ensures effective surface processing. The NEO TOOLS disc meets the requirements of EN 13236 and is designed to operate at a maximum speed of 7,600 rpm and a peripheral speed of 80 m/s, making it safe for use with compatible angle grinders.
Flap wheel 115 x 22.2 mm, P40, zirconia 57-835 by NEO TOOLS is a 115 mm diameter, P40 gradation accessory with a 22.2 mm mounting hole, designed for grinding metal - including stainless steel and acid-resistant steel (INOX). The fan-shaped, radial flap arrangement with full grit (100% zirconia grain coverage) on an X-type cloth base ensures a high stock removal rate and stable guidance in machine work. The zirconia grain has a self-sharpening effect, thus extending the life of the tool in intensive work. The maximum speed is 13,300 rpm and the permissible linear speed is 80 m/s.
The 200 x 25.4 mm, segmented 57-870 diamond disc by NEO TOOLS with a diameter of 200 mm and a mounting hole of 25.4 mm is designed for dry work in concrete. Equipped with segments of 8 mm height and 2.5 mm thickness, it ensures effective cutting with adequate guidance stability. The NEO TOOLS blade is designed to operate at a maximum speed of 7,600 rpm and a peripheral speed of 80 m/s.
The stone cutting disc 115 x 1.6 x 22.2 mm, 41 C 46-R-BF, 57-720 by NEO TOOLS is a 115 x 1.6 x 22.2 mm disc. The product is intended for dry stone cutting. It is characterised by a maximum rotational speed of 13 200 rpm and a maximum peripheral speed of 80 m/s. Thanks to its advanced design, it significantly reduces working time. It ensures a high level of safety thanks to compliance with the EN12313 standard. The NEO TOOLS brand disc is recommended for professionals and DIY enthusiasts.
Flap wheel 115 x 22.2 mm, P120, zirconia 57-839 by NEO TOOLS is an accessory with a diameter of 115 mm and gradation P120, with a mounting hole of 22.2 mm, designed for grinding metal - including stainless and acid-resistant steel (INOX). The fan-shaped, radial flap arrangement with full grit (100% zirconia grain coverage) on an X-type cloth base ensures a high stock removal rate and stable guidance in machine work. The zirconia grain has a self-sharpening effect, thus extending the life of the tool in intensive work. The maximum speed is 13,300 rpm and the permissible linear speed is 80 m/s.
Brass Brushes, Brush, Cup, Disc Brush, Set of 3 55-067 by NEO TOOLS is a set of 3 pieces comprising a 5mm diameter brush, a 15mm diameter cup brush and a 22mm diameter disc brush - each with a 3.2mm diameter shank. They are made from crimped brass-plated steel wire and are designed for polishing. They can be suitable for metal, wood, ceramics, glass and plastics.
Flap wheel 115 x 22.2 mm, P100, 55-984 by NEO TOOLS is a 115 mm diameter, P100 gradation accessory with a 22.2 mm mounting hole, designed for efficient grinding of metal and wood with angle grinders. The fan-shaped, radial arrangement of the abrasive cloth leaves increases the efficiency of stock removal, while the C-type cloth base, which is adapted for machine sanding, provides stable pressure during use. It uses a solid coating (100% grain coverage, electro-corundum), which promotes service life and an even surface finish. The maximum speed is 13,300 rpm and the permissible linear speed is 80 m/s.
