Cutting disc GRAPHITE (no ref. 55H697) outside diameter 115 mm outside diameteand internal 22.2 mm. The edges of the disc are covered with tungsten carbide, thanks to which it is very good at cutting soft materials, including: wood, wooden boards, chipboards, bricks, plastic, plasterboard.Dedicated to work with angle grinders.
Cutting disc, alumina for metal/INOX 125 x 1.0 x 22.2 mm, 41 A60-T-BF, 110 pieces, carton 57T126 by GRAPHITE is an alumina disc that is designed for cutting metal and stainless steel (INOX). The dimensions of the tool are 125 x 1.0 x 22.2 mm. This model has a flat design and the designation 41 A60-T-BF. The thickness of the blade is 1.0 mm and the diameter of the mounting hole is 22.2 mm. The maximum speed is 12,200 rpm, which corresponds to a speed of 80 m/s. The product complies with the EN 12413 standard and is offered in a packaging of 110 pieces.
Cutting wheel, alumina for metal/INOX 115 x 1.0 x 22.2 mm, 41 A60-T-BF, 57T100 by GRAPHITE is an alumina wheel that is designed for cutting metal and stainless steel (INOX). Its dimensions are 115 x 1.0 x 22.2 mm. This model has a flat design and the designation 41 A60-T-BF. The thickness of the blade is 1.0 mm and the diameter of the mounting hole is 22.2 mm. The maximum speed is 13,300 rpm, corresponding to a speed of 80 m/s. The product complies with the EN 12413 standard.
Cutting disc for metal GRAPHITE (ref. no. 55H574) with diameters 115 mm allows to advanced design and greatly reduce cutting time thanks to reduced thickness. Product is compliant with EN 12413, which ensures high safety at work.
Metal cutting disc 115 x 1,0 x 22,2 mm, 41 A60-T-BF 10 pieces, film 55H577 by GRAPHITE consists of 10 pieces of metal cutting discs with parameters 115 x 1 x 22,2 mm. The product is designed for cutting metal. Thanks to its advanced design and thickness reduction, it allows you to significantly reduce working time. Ensures a high level of safety thanks to compliance with the EN12313 standard. GRAPHITE brand discs are recommended for professionals and DIY enthusiasts.
Cutting disc, alumina for concrete 115 x 2 x 22.2 mm, 41 C46-R-BF, 57T115 by GRAPHITE is a tool designated type 41 C46-R-BF. The flat disc features a diameter of 115 mm, a thickness of 2 mm and a mounting hole diameter of 22.2 mm. It has been adapted to operate at a maximum speed of 13,300 rpm and an operating speed of 80 m/s. The product complies with EN 12413 and, being designed for cutting concrete, will work well in any do-it-yourself workshop.
GRAPHITE stone cutting disc allows to greatly reduce cutting time thanks to advanced design and reduced thickness. Product is compliant with EN12413, which ensures high safety at work.
Cutting wheel, alumina for metal 125 x 1 x 22.2 mm, 41 A60-T-BF, 57T108 by GRAPHITE is an alumina wheel that is designed for cutting metal. Its dimensions are 125 x 1,0 x 22,2 mm. This model has a flat design and the designation 41 A60-T-BF. The thickness of the disc is 1 mm and the diameter of the mounting hole is 22.2 mm. The maximum speed is 12,200 rpm, which corresponds to a speed of 80 m/s. The product complies with the EN 12413 standard.
Cutting wheel, corundum for metal 125 x 2 x 22.2 mm, 41 A46-T-BF, 57T110 by GRAPHITE is an alumina wheel that is designed for cutting metal. Its dimensions are 125 x 2 x 22.2 mm. This model has a flat design and the designation 41 A46-T-BF. The thickness of the disc is 2 mm and the diameter of the mounting hole is 22.2 mm. The maximum speed is 12,200 rpm, corresponding to a speed of 80 m/s. The product complies with the EN 12413 standard.
Metal cutting disc VERTO (ref. no. 61H530) with an outer diameter of 115 mm allows to greatly reduce cutting time thanks to reduced thickness. Product is compliant with EN 12413, which ensures high safety at work. VERTO brand offers power tool and accessories assortment for all DIY enthusiasts.
Cutting wheel, alumina for metal/INOX 125 x 1.0 x 22.2 mm, 41 A60-T-BF, 57T102 by GRAPHITE is an alumina wheel that is designed for cutting metal and stainless steel (INOX). Its dimensions are 125 x 1 x 22.2 mm. This model has a flat design and the designation 41 A60-T-BF. The thickness of the blade is 1.0 mm and the diameter of the mounting hole is 22.2 mm. The maximum speed is 12,200 rpm, corresponding to a speed of 80 m/s. The product complies with the EN 12413 standard.
Metal cutting disc VERTO (ref. no. 61H532) with an outer diameter of 125 mm allows to greatly reduce cutting time thanks to reduced thickness. Product is compliant with EN 12413, which ensures high safety at work. VERTO brand offers power tool and accessories assortment for all DIY enthusiasts.
GRAPHITE's 115 x 1.2 x 22.22 mm 57T124 TCT blade for cutting wood, wood with nails and plastics. The blade has a diameter of 115 mm, a thickness of 1.2 mm and a mounting hole of 22.2 mm. It has a maximum speed of 13,300 rpm and a maximum working speed of 80 m/s. The product is characterised by its compliance with EN 13236 and is designed for use in cutting tools that support this type of disc.
GRAPHITE stone cutting disc allows to greatly reduce cutting time thanks to advanced design and reduced thickness. Product is compliant with EN12413, which ensures high safety at work.
Cutting wheel, alumina for metal/INOX 125 x 1.6 x 22.2 mm, 41 A46-T-BF, 57T103 by GRAPHITE is an alumina wheel that is designed for cutting metal and stainless steel (INOX). Its dimensions are 125 x 1.6 x 22.2 mm. This model has a flat design and the designation 41 A46-T-BF. The thickness of the blade is 1.6 mm and the diameter of the mounting hole is 22.2 mm. The maximum speed is 12,200 rpm, corresponding to a speed of 80 m/s. The product complies with the EN 12413 standard.
Cutting wheel, corundum for metal 115 x 2.0 x 22.2 mm, 42 A46-T-BF, convex 57T118 by GRAPHITE is a convex wheel with a diameter of 115 mm, a thickness of 2 mm and a mounting hole of 22.2 mm. It features a maximum speed of 13,300 rpm, with an operating speed of 80 m/s. The product is designed for cutting metal. The GRAPHITE blade meets the requirements of EN 12413.
Cutting disc, corundum for metal/INOX 230 x 2.5 x 22.2 mm, 41 A30-S-BF, 57T104 by GRAPHITE is an alumina disc that is designed for cutting metal and stainless steel (INOX). Its dimensions are 230 x 2.5 x 22.2 mm. This model has a flat design and the designation 41 A30-S-BF. The thickness of the blade is 2.5 mm and the diameter of the mounting hole is 22.2 mm. The maximum speed is 6,600 rpm, which corresponds to a speed of 80 m/s. The product complies with the EN 12413 standard.
Cutting disc, alumina for concrete 115 x 2.0 x 22.2 mm, 42 C46-R-BF, convex 57T122 by GRAPHITE is a convex disc with a diameter of 115 mm, a thickness of 2 mm and a mounting hole of 22.2 mm. It features a maximum speed of 13,300 rpm, with an operating speed of 80 m/s. The product is designed for cutting concrete. The GRAPHITE blade meets the requirements of EN 12413.
GRAPHITE metal cutting disc thanks to advanced design and reduced thickness allows to greatly reduce cutting time. Product is compliant with EN12413, which ensures high safety at work.
The 355 x 3.5 x 32 mm, 41 A24-R-BF, 57-712 metal cutting disc by NEO TOOLS is a 355 x 3.5 x 32 mm metal cutting disc for dry cutting. It is characterised by a maximum rotational speed of 4,400 rpm and a maximum peripheral speed of 80 m/s. Thanks to its advanced design and thickness, it allows a significant reduction in working time. It ensures a high level of safety thanks to compliance with the EN12413 standard. The NEO TOOLS brand disc is recommended for professionals and DIY enthusiasts.
