Hand tools and kits

• Tüüp: Universaalne nuga kahe teraga süsteemiga
• Tera tüüp: Trapezoidne ja konksuga tera (hook blade)
• Korpus: Vastupidav tsingisulamist metallkorpus
• Käepide: Libisemisvastane ABS + TPR kate
• Tera hoidmine: Topelt tera sahtel ja varuterade hoidik
• Lukustus: Teralukk stabiilsuse tagamiseks
• Komplektis: 6 tera (sh 4 varutera)
• Kaal: 303 g

Kasutusvaldkonnad: Vaipade lõikamine, teibi ja pakkide avamine – sobib laotöötajatele, ehitajatele ja viimistlejatele.

See nuga on ergonoomiline, vastupidav ja mitmekülgne, sobides hästi professionaalseks kasutuseks.

A complete 3-piece cutting tool set designed for professional electrical work, combining precision, versatility, and ergonomic efficiency.

Set Contents:

Knipex Electronic Super Knips® – 78 06 125 VDE

• Precision cutting pliers for ultra-fine wires
• Shear cut with controlled micro cutting edge misalignment
• Ideal for delicate electronics work
• VDE-tested for electrical safety

Knipex Diagonal Cutter – 70 06 160 VDE

• Robust cutter for soft and hard wires up to Ø 2 mm
• Clean cuts even at the tips
• Made from vanadium electric steel, forged and multi-stage oil-hardened
• VDE-tested

Knipex StepCut® Cable Shears – 95 16 160 VDE

• Power-saving cable shears with stepped cutting edges
• Cuts wires sequentially for up to 40% easier cutting compared to standard shears
• Suitable for cables up to Ø 15 mm / 50 mm²
• VDE-tested

General Features:

High-quality materials and multi-stage oil hardening

VDE-tested handle sleeves for safe electrical work

Perfectly complementary tools for a wide range of cutting tasks

REACH compliant (no SVHC)

RoHS: Not applicable

Weight: Approx. 510–596 g (set)

Dimensions: Approx. 166 × 30 mm

• Part Number: 70 02 125
• Length: 125 mm
• Weight: approx. 105 g
• Material: Vanadium electric steel, forged and oil-hardened
• Handles: Plastic coated
• Cutting edge hardness: approx. 62 HRC
• Standards: DIN ISO 5749
  
  
  

Features:

• Precision cutting edges for soft and hard wire
• Induction-hardened cutting edges for long service life
• Narrow head style for use in confined areas
• Universal diagonal cutters for everyday use
• Lightweight and compact design

Cutting Capacities:

• Soft wire: up to Ø 3.0 mm
• Medium-hard wire: up to Ø 2.3 mm
• Hard wire: up to Ø 1.5 mm

Features:

• Length: 140 mm
• Cutting edge hardness: approx. 62 HRC (induction-hardened)
• Material: Vanadium electric steel, oil-hardened
• Head finish: Polished, black atramentized
• Handles: Ergonomic multi-component grips
• Standard compliance: DIN ISO 5749
• Weight: approx. 150 g

Cutting capacities:

• Soft wire (e.g. copper): up to Ø 4.0 mm
• Medium hard wire: up to Ø 2.5 mm
• Hard wire (e.g. steel strands): up to Ø 1.8 mm

Slim head design allows use in confined spaces. High precision and durability for professional use.

• Tool Type: Diagonal Cutter
• Length: 125 mm
• Weight: 121 g
• Material: Vanadium electric steel, forged, multi-stage oil-hardened
• Head Finish: Chrome-plated
• Handles: Insulated with multi-component grips, VDE-tested (up to 1000 V)
• Cutting Edge Hardness: Approx. 62 HRC

Cutting Capacities:

• Soft wire: up to Ø 3.0 mm
• Medium-hard wire: up to Ø 2.3 mm
• Hard wire: up to Ø 1.5 mm

Features:

• Narrow head style for use in confined areas
• Precision cutting edges for soft and hard wire
• Clean cutting of thin copper wires, even at the tips
• Induction-hardened cutting edges for long service life
• High-quality material and precise workmanship
• Standards: DIN ISO 5749, DIN EN 60900, IEC 60900
• REACH compliant (does not contain SVHC)

Knipex 70 06 140 Diagonal Cutter (VDE) is a versatile insulated side cutter designed for electrical and electronic work.

Features:

• Length: 140 mm
• Cutting edge hardness: approx. 62 HRC (induction-hardened)
• Material: Vanadium electric steel, forged and oil-hardened
• Finish: Chrome-plated head
• Handles: Multi-component grips, VDE-tested, insulated up to 1000 V
• Standards: DIN ISO 5749, DIN EN 60900, IEC 60900
• REACH & RoHS compliance: SVHC-free, RoHS not applicable
• Use case: Ideal for confined workspaces due to slim head design

Cutting capacity:

• Soft wire (e.g. copper): up to Ø 4.0 mm
• Medium hard wire: up to Ø 2.5 mm
• Hard wire (e.g. steel): up to Ø 1.8 mm

Provides clean cuts even for very fine copper wires, right at the cutting edge tips.

• Tool Type: Electronics Diagonal Cutter
• Length: 116 mm
• Weight: 70 g
• Material: Special tool steel, forged, oil-hardened
• Head Finish: Mirror polished
• Handles: Multi-component ergonomic grips
• Cutting Edge Hardness: Approx. 57 HRC

Cutting Capacities:

Soft wire: up to Ø 1.3 mm

Medium-hard wire: up to Ø 0.8 mm

Features:

• Precision tool for fine cutting in electronics and precision mechanics
• Pointed head without bevel – ideal for confined spaces
• Sturdy, zero-backlash box joint for durability
• Low-friction double spring for smooth and even opening
• Mirror polish with oil film for rust protection
• Not suitable for cutting hard wire

Description:

Precision pliers designed for ultra-fine cutting tasks in electronics and fine mechanics. The ESD version features handles that safely discharge electrostatic energy, protecting sensitive electronic components.

Key Features:

Cutting edges: Ground, very sharp, without bevel – ideal for flush cutting

Cutting edge hardness: Approx. 54 HRC

Material: INOX stainless steel (surgical grade)

Cutting type: Shear cut with controlled micro cutting edge misalignment for precision and durability

Joint: Stainless steel rivet for smooth operation

Handles: Multi-component ESD-safe grips

Opening spring and limiter: For ergonomic use and reduced fatigue

Precision tips: Allow cutting wires as thin as Ø 0.2 mm close to surfaces

Cutting Capacities:

Soft wire: Ø 0.2 – 1.6 mm

Medium hard wire: Ø 1.0 mm

Dimensions:

Length: 125 mm

Jaw length (B): 9 mm

Jaw thickness (D): 7.5 mm

Head width (A): 13.5 mm

Weight: 56 g

Compliance:

Standard: DIN ISO 9654

REACH: Compliant (no SVHC)

RoHS: Not applicable

• Product Type: Precision side cutters for ultra-fine cutting work
• Manufacturer Code: 78 13 125 ESD
• Length: 125 mm
• Weight: 57 g
• Material: INOX tool steel (surgical stainless steel)
• Handles: Multi-component grips, electrically dissipative (ESD protection)
• Cutting Edge Hardness: Approx. 54 HRC
• Standards: DIN ISO 9654, DIN EN 61340-5
• REACH compliant: Does not contain SVHC
• RoHS compliant: Not applicable

Features:

ESD protection: Conductive handles discharge electrostatic energy slowly and safely, protecting sensitive electronic components.

Lead catcher: Prevents uncontrolled loss of cut wire ends.

Precision cutting: Ground, very sharp cutting edges without bevel for flush cuts.

Micro cutting edge misalignment: Ensures precise shear cuts and long service life.

Tip design: Precisely shaped tips allow cutting wires close to surfaces from Ø 0.2 mm.

Smooth operation: Stainless steel rivet joint and opening spring reduce operator fatigue.

Opening limiter: Prevents overextension and improves control.

Cutting Capacities:

Soft wire: Ø 0.2 – 1.6 mm

Medium-hard wire: Ø 1.0 mm

Jaw length (B): 9 mm

Jaw thickness (D): 7.5 mm

Head width (A): 13.5 mm

• Product Type: Electronic Super Knips® ESD – precision pliers for ultra-fine cutting work
• Part No.: 78 71 125 ESD
• Length: 125 mm
• Weight: 57 g
• Material: Special tool steel, burnished
• Handles: Multi-component grips, electrically dissipative (ESD protection)
• Cutting Edge Hardness: Approx. 62 HRC
• Standards: DIN ISO 9654, DIN EN 61340-5
• REACH compliant: Does not contain SVHC
• RoHS compliant: Not applicable

Features:

• ESD protection: Conductive handles discharge electrostatic energy slowly and safely, protecting sensitive electronics.
• Lead catcher: Prevents uncontrolled loss of cut wire ends.
• Precision cutting edges: Ground without bevel for flush cuts.
• Micro cutting edge misalignment: Ensures precise shear cuts and long service life.
• Opening spring and limiter: Reduces operator fatigue and improves control.
• Joint: Stainless steel rivet for smooth movement.

Cutting Capacities:

• Soft wire: Ø 0.2 – 1.6 mm
• Medium-hard wire: Ø up to 1.2 mm
• Jaw length (B): 9 mm
• Jaw thickness (D): 7.5 mm
• Head width (A): 13.5 mm

Compact, powerful cable shears designed for effortless cutting of copper and aluminum cables, using innovative StepCut® technology.

Key Features:

StepCut® design: Gradual cutting of wires one by one reduces effort by up to 40% compared to standard cable shears of the same size.

Small, light, strong: Only 160 mm in length, ideal for tight spaces and one-handed operation.

Ergonomic handle: Comfortable grip even for larger cable diameters.

Bolted joint: Ensures precise, durable, and smooth cutting.

Pinch guard: Prevents finger injuries during use.

Cutting edges: Induction-hardened, approx. 56 HRC.

Material: High-grade special tool steel, forged and oil-hardened.

Finish: Burnished blades, plastic-coated handles.

Cutting Capacity:

Multi-core stranded copper/aluminum cables: up to Ø 15 mm (50 mm²)

Solid copper/aluminum cables: up to 5 × 4 mm²

AWG: up to 1/0

Not suitable for: Steel wire or hard-drawn copper conductors

Technical Data:

Length: 160 mm

Weight: 180 g

Dimensions: 160 × 40 × 14 mm

REACH: Compliant (no SVHC)

RoHS: Not applicable

Professional cable shears for cutting copper and aluminium single conductors and multi-stranded cables.

Key Features:

Clean and smooth cuts without crushing or deformation

Not suitable for steel wire or hard-drawn copper conductors

Precision-ground, hardened blades

One-hand operation for easy cutting

Pinch guard for operator safety

Adjustable bolted joint, self-retaining screw

Material: High-grade special tool steel, forged and oil-hardened

Handles: Plastic-coated

Technical Specifications:

Length: 165 mm

Weight: 215 g

Cutting capacity:

Copper cable, multi-stranded: up to 50 mm² / Ø 15 mm

AWG: 1/0

REACH: Compliant (no SVHC)

RoHS: Not applicable

These shears require only about one-third the effort compared to conventional diagonal cutters, making them ideal for prolonged electrical installation work.

Small, light, and strong cable shears designed for effortless cutting of copper and aluminum cables using StepCut® technology.

Key Features:

StepCut® design: Gradual cutting of wires one by one reduces effort by up to 40% compared to standard cable shears of the same length.

Compact size: Only 160 mm long – ideal for tight spaces and one-handed operation.

Ergonomic handle design: Comfortable grip even for larger cable diameters.

Bolted joint: Ensures precise, durable, and smooth cutting.

Pinch guard: Prevents finger injuries during use.

Cutting edges: Induction-hardened, approx. 56 HRC.

Material: High-grade special tool steel, forged and oil-hardened.

Finish: Burnished blades with multi-component comfort grips.

Cutting Capacity:

Multi-core stranded copper/aluminum cables: up to Ø 15 mm (50 mm²)

Solid copper/aluminum cables: up to 5 × 4 mm²

AWG: up to 1/0

Not suitable for: Steel wire or hard-drawn copper conductors

Technical Data:

Length: 160 mm

Weight: 225 g

Dimensions: 160 × 53 × 20 mm

REACH: Compliant (no SVHC)

RoHS: Not applicable

Compact, powerful cable shears designed for professional electrical work, offering up to 40% easier cutting compared to standard shears of the same size.

Key Features:

StepCut® technology: Gradual cutting of wires reduces effort significantly

Length: Just 160 mm – small, light, and strong

Ergonomic handle design: Comfortable grip even for larger cable diameters.

Cutting performance:

Multi-core stranded copper/aluminium cables: up to Ø 15 mm (50 mm²)

Solid copper/aluminium cables: up to 5 × 4 mm²

Clean cuts without crushing

Bolted joint: Ensures precise, durable, and effortless operation

Pinch guard: For safe handling

Cutting edges: Induction-hardened, approx. 56 HRC

Material: High-grade special tool steel, forged and oil-hardened

Handles: Insulated with multi-component grips, VDE-tested

Standards: DIN EN 60900 / IEC 60900

Not suitable for: Steel wire or hard-drawn copper conductors

Technical Data:

Weight: Approx. 225 g

Dimensions: 160 × 60 × 28 mm

REACH: Compliant (no SVHC)

RoHS: Not applicable

Professional-grade cable shears designed for cutting copper and aluminium single conductors and multi-stranded cables.

Key Features:

Clean and smooth cuts without crushing or deformation

Not suitable for steel wire or hard-drawn copper conductors

Precision-ground, hardened blades

One-hand operation for easy cutting

Pinch guard for operator safety

Adjustable bolted joint with self-retaining screw

Material: High-grade special tool steel, forged and oil-hardened

Handles: Insulated with multi-component grips, VDE-tested

Technical Specifications:

Length: 165 mm

Weight: 262 g

Cutting capacity:

Copper cable, multi-stranded: up to 50 mm² / Ø 15 mm

AWG: 1/0

Standards: DIN EN 60900 / IEC 60900

REACH: Compliant (no SVHC)

RoHS: Not applicable

Features:

• Very sharp cutting edges without bevel – for flush cuts
• Cutting capacity: soft wire up to Ø 1.6 mm, medium hard wire up to Ø 1.0 mm
• Cutting edge hardness: approx. 54 HRC
• Made of INOX tool steel (surgical stainless steel)
• Opening spring and limiter – smooth operation
• Lead catcher – prevents uncontrolled loss of wire ends
• Weight: 57 g
• Dimensions: 125 x 48 x 12 mm
• Complies with DIN ISO 9654
• REACH compliant (does not contain SVHC)