Holesaws and adapters

GRAPHITE's 14mm 56T700 bi-metal hole saw 56mm high allows drilling to a depth of 38mm. It is made from HSS high speed steel and is fitted with a 1/2'' x 20 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T753 adapter with pilot drill bit for bi-metal hole saws in the 14-30 mm range. Maximum speeds for this tool, vary depending on the material: steel - 580 rpm, Inox steel - 300 rpm, aluminium - 900 rpm, wood - 800 rpm, cast iron - 400 rpm, brass - 790 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.

GRAPHITE's 43mm 56T739 tungsten tipped hole saw is designed to work in brick, hollow block, cellular concrete, plasterboard and lightweight building materials. It has a height of 68mm and provides a drilling depth of 57mm. The cutting edge of the hole saw is coated with a tungsten carbide coating and has a maximum speed of 1,200 rpm. The tool is designed for use with the 56T744 tungsten carbide hole saw blade and 56T745 pilot drill. It can be used for any installation work, such as fitting power sockets, distribution boxes or pipes. It can also be used for cable conduit pipes, ventilation pipes or installation fans in the kitchen or bathroom.

Wood hole saws 26 - 63 mm, h 25 mm, hardened teeth, set of 7 pieces 56T751 by GRAPHITE is a set containing 7 pieces with diameters: 26, 32, 38, 45, 50, 56 and 63 mm. The height of each hole saw is 25 mm and the maximum drilling depth is 18 mm. The maximum speed is 1500 rpm. The product is fitted with hardened teeth and is designed for drilling in wood, plasterboard and plastic.

With a height of 44 mm, GRAPHITE's 60 mm bi-metal hole saw 56T713 allows drilling to a depth of 38 mm. It is made from HSS high-speed steel and has a 5/8'' x 18 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T754 adapter with pilot drill bit for bi-metal holesaws in the 32-152 mm range. Maximum speeds for this tool, vary depending on the material: steel - 140 rpm, Inox steel - 70 rpm, aluminium - 220 rpm, wood - 180 rpm, cast iron - 95 rpm, brass - 190 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.

GRAPHITE's 105 mm 56T720 bi-metal hole saw with a height of 44 mm allows drilling to a depth of 38 mm. It is made from HSS high speed steel and is fitted with a 5/8'' x 18 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T754 adapter with pilot drill bit for bi-metal holesaws in the 32-152 mm range. Maximum speeds for this tool, vary depending on the material: steel - 80 rpm, Inox steel - 40 rpm, aluminium - 120 rpm, wood - 100 rpm, cast iron - 55 rpm, brass - 110 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.

The 56T725 bi-metal pilot drill bit by GRAPHITE is a drill bit with a diameter of 6.35 mm. It was made from high speed steel (HSS) using the deep grinding method. The GRAPHITE tool has a cylindrical shank and can be intended as an interchangeable part for the 56T753 and 56T754 adapters. Recommended for use for drilling in metal, stainless steel (Inox), aluminium, wood, cast iron and brass.

GRAPHITE's 14mm 56T730 diamond hole saw has a brazed diamond blank and a cylindrical shank. It is designed for efficient drilling in stoneware, ceramics, glass and brick. It can work either wet or dry, and the drilling itself is done without impact. The maximum speed of the hole saw is 3000 rpm, while its maximum drilling depth is 30 mm. The GRAPHITE-branded tool is designed for drilling with a drill or a screwdriver.

The 70 mm bi-metal hole saw 56T717 by GRAPHITE, with a height of 44 mm, allows drilling to a depth of 38 mm. It is made from HSS high speed steel and is fitted with a 5/8'' x 18 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T754 adapter with pilot drill bit for bi-metal holesaws in the 32-152 mm range. Maximum speeds for this tool, vary depending on the material: steel - 125 rpm, Inox steel - 60 rpm, aluminium - 185 rpm, wood - 160 rpm, cast iron - 80 rpm, brass - 160 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.

GRAPHITE bi-metal holesaws 19-68 mm, set of 7 pieces 56T723 by GRAPHITE with a height of 51 mm (for 19, 29, 33 mm diameters) and 44 mm (for 51, 68 mm diameters) allow drilling to a depth of 38 mm. They are made of HSS and are equipped with 1/2'' x 20 UNF (19, 29 mm), 5/8" x 18 UNF (33, 51, 68 mm) threads. Designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. GRAPHITE holesaws are recommended to be used with the adapters offered in the kit - 3/8 Hex and 7/16 Hex. Maximum speeds for these tools, vary depending on the material: steel - 460 rpm (for a diameter of 19 mm), 300 rpm (for a diameter of 29 mm), 260 rpm (for a diameter of 33 mm), 170 rpm (for a diameter of 51 mm), 130 rpm (for a diameter of 68 mm); Inox steel - 230 rpm (for a diameter of 19 mm), 300 rpm (for a diameter of 29 mm), 260 rpm (for a diameter of 33 mm), 170 rpm (for a diameter of 51 mm), 130 rpm (for a diameter of 68 mm); Inox steel - 230 rpm (for a diameter of 19 mm)./rpm (for 19 mm diameter), 150 rpm (for 29 mm diameter), 135 rpm (for 33 mm diameter), 85 rpm (for 51 mm diameter), 65 rpm (for 68 mm diameter); aluminium - 690 rpm (for 19 mm diameter), 450 rpm (for 29 mm diameter), 390 rpm (for 33 mm diameter), 255 rpm (for 51 mm diameter), 130 rpm (for 68 mm diameter); stainless steel - 150 rpm (for 33 mm diameter), 150 rpm (for 51 mm diameter), 130 rpm (for 51 mm diameter); stainless steel - 230 rpm (for 19 mm diameter), 150 rpm (for 29 mm diameter), 135 rpm (for 33 mm diameter), 85 rpm (for 51 mm diameter), 65 rpm (for 68 mm diameter); aluminium - 690 rpm (for 19 mm diameter), 450 rpm (for 33 mm diameter), 255 rpm (for 51 mm diameter)/rpm (for diameter 51 mm), 190 rpm (for diameter 68 mm); wood - 680 rpm (for diameter 19 mm), 450 rpm (for diameter 29 mm), 390 rpm (for diameter 33 mm), 200 rpm (for diameter 51 mm), 165 rpm (for diameter 68 mm); cast iron - 300 rpm (for diameter 19 mm), 200 rpm (for diameter 29 mm), 200 rpm (for diameter 33 mm), 200 rpm (for diameter 33 mm), 165 rpm (for diameter 33 mm); cast iron - 300 rpm (for diameter 29 mm), 200 rpm (for diameter 33 mm), 200 rpm (for diameter 33 mm), 200 rpm (for diameter 51 mm), 190 rpm (for diameter 68 mm)./(for 29 mm diameter), 175 rpm (for 33 mm diameter), 115 rpm (for 51 mm diameter), 85 rpm (for 68 mm diameter); brass - 600 rpm (for 19 mm diameter), 400 rpm (for 29 mm diameter), 345 rpm (for 33 mm diameter), 230 rpm (for 51 mm diameter), 165 rpm (for 68 mm diameter). The bi-metal holesaws are designed to be used with a drill or drill/driver.

GRAPHITE's 33-83 mm tungsten tipped holesaws, set of 8 56T743 are holesaws designed for use in brick, hollow block, cellular concrete, plasterboard and lightweight building materials. They have a height of 68mm and provide a drilling depth of 57mm. They are offered with diameters of 33, 53, 67, 73, 83 mm. The cutting edge of each hole saw is coated with tungsten carbide and has a maximum speed of 1,200 rpm. The tools are designed for use with the 56T744 tungsten carbide hole saw blade and 56T745 pilot drill (available as a set). A practical tungsten carbide file is also included for easy manual refinement of drilled surfaces. The holesaws can be used for any installation work, such as the installation of power sockets, distribution boxes or pipes. They can also be used for cable conduit pipes, ventilation pipes or installation fans in the kitchen or bathroom.

With a height of 51 mm, GRAPHITE's 35 mm bi-metal hole saw 56T708 allows drilling to a depth of 38 mm. It is made from HSS high speed steel and is fitted with a 5/8'' x 18 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T754 adapter with pilot drill bit for bi-metal holesaws in the 32-152 mm range. Maximum speeds for this tool, vary depending on the material: steel - 250 rpm, Inox steel - 125 rpm, aluminium - 375 rpm, wood - 310 rpm, cast iron - 165 rpm, brass - 330 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.

GRAPHITE's 46mm bi-metal hole saw 56T711 is 44mm high and allows drilling to a depth of 38mm. It is made from HSS high-speed steel and has a 5/8'' x 18 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T754 adapter with pilot drill bit for bi-metal holesaws in the 32-152 mm range. Maximum speeds for this tool, vary depending on the material: steel - 190 rpm, Inox steel - 95 rpm, aluminium - 285 rpm, wood - 230 rpm, cast iron - 125 rpm, brass - 250 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.

Wood hole saws 26 - 63 mm, h 50 mm, set of 7 pieces 56T750 by GRAPHITE is a set containing 7 pieces with diameters: 26, 32, 38, 45, 50, 56 and 63 mm. The height of each hole saw is 50 mm and the maximum drilling depth is 42 mm. The maximum rotational speed is 1500 rpm. The product is designed for drilling in wood, plasterboard and plastic.

GRAPHITE's 67 mm 56T715 bi-metal hole saw, with a height of 44 mm, allows drilling to a depth of 38 mm. It is made from HSS high speed steel and is fitted with a 5/8'' x 18 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T754 adapter with pilot drill bit for bi-metal holesaws in the 32-152 mm range. Maximum speeds for this tool, vary depending on the material: steel - 130 rpm, Inox steel - 65 rpm, aluminium - 195 rpm, wood - 170 rpm, cast iron - 85 rpm, brass - 170 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.

GRAPHITE's 56T753 pilot bit adapter for bi-metal holesaws 14-30 mm, Hex 56T753 with a diameter of 6.35 mm is designed for bi-metal holesaws with diameters from 14 to 30 mm. It has a 3/8" HEX shank. It is made of HSS material. The adapter is used when drilling in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The set includes a screw-mounted guide drill bit. The GRAPHITE brand adaptor is designed for mounting bi-metal holesaws in drills.

With a height of 51 mm, GRAPHITE's 24 mm bi-metal hole saw 56T704 allows drilling to a depth of 38 mm. It is made from HSS high speed steel and is fitted with a 1/2'' x 20 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T753 adapter with pilot drill bit for bi-metal hole saws in the 14-30 mm range. Maximum speeds for this tool, vary depending on the material: steel - 370 rpm, Inox steel - 185 rpm, aluminium - 555 rpm, wood - 500 rpm, cast iron - 245 rpm, brass - 495 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.

The 79 mm bi-metal hole saw 56T718 by GRAPHITE, with a height of 44 mm, allows drilling to a depth of 38 mm. It is made from HSS high speed steel and is fitted with a 5/8'' x 18 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T754 adapter with pilot drill bit for bi-metal holesaws in the 32-152 mm range. Maximum speeds for this tool, vary depending on the material: steel - 110 rpm, Inox steel - 55 rpm, aluminium - 165 rpm, wood - 150 rpm, cast iron - 70 rpm, brass - 140 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.

GRAPHITE's 16 mm 56T701 bi-metal hole saw 56 mm high allows drilling to a depth of 38 mm. It is made from HSS high speed steel and is fitted with a 1/2'' x 20 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T753 adapter with pilot drill bit for bi-metal hole saws in the 14-30 mm range. Maximum speeds for this tool, vary depending on the material: steel - 550 rpm, Inox steel - 275 rpm, aluminium - 825 rpm, wood - 760 rpm, cast iron - 365 rpm, brass - 730 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.

With a height of 44mm, GRAPHITE's 152mm bi-metal hole saw 56T721 allows drilling to a depth of 38mm. It is made from HSS high speed steel and is fitted with a 5/8'' x 18 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T754 adapter with pilot drill bit for bi-metal holesaws in the 32-152 mm range. Maximum speeds for this tool, vary depending on the material: steel - 55 rpm, Inox steel - 25 rpm, aluminium - 85 rpm, wood - 75 rpm, cast iron - 35 rpm, brass - 75 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.

The 20 mm bi-metal hole saw 56T703 by GRAPHITE, with a height of 51 mm, allows drilling to a depth of 38 mm. It is made from HSS high speed steel and is fitted with a 1/2'' x 20 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T753 adapter with pilot drill bit for bi-metal hole saws in the 14-30 mm range. Maximum speeds for this tool, vary depending on the material: steel - 445 rpm, Inox steel - 220 rpm, aluminium - 660 rpm, wood - 520 rpm, cast iron - 290 rpm, brass - 580 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.