KNIPEX

• Type: Ratchet-style cable cutter for copper and aluminium cables.
• Length: 280 mm
• Weight: approx. 860 g
• Cutting Capacity:

    Copper cable, multi-stranded: up to 380 mm²

• Diameter: up to Ø 52 mm
• MCM: 750
• Suitable for aluminium sector cable up to 4 × 150 mm²
• Not suitable for steel wire, wire ropes, or highly flexible fine-stranded conductors.

Design & Operation:

• One-hand operation using ratchet principle.
• Two-stage ratchet drive for easy cutting with minimal hand force thanks to high transmission ratio.
• Clean and smooth cut without crushing or deformation.
• Fixed handle with support area for placing the tool during cutting.
• Pinch guard prevents fingers from being pinched.
• Compact and lightweight for use in confined spaces.

Material & Finish:

• High-grade special tool steel, forged and oil-hardened.
• Surface: Black lacquered.
• Handles: Multi-component grips for comfort.

Compliance:

• REACH: Does not contain SVHC substances.
• RoHS: Not applicable.

Dimensions: 280 × 131 × 34 mm.

• Type: Ratchet-style cable cutter with three-stage mechanism for high leverage.
• Length: 320 mm
• Weight: approx. 825 g
• Cutting Capacity:

    Copper and aluminium cables up to Ø 60 mm (600 mm²)

    Not suitable for steel wire, wire ropes, or highly flexible fine-stranded     conductors.

• Design:

    Compact and lightweight for easy handling, even in confined spaces.

    Fixed handle with support area for placing the tool during cutting.

    Hardened, precision-ground cutting edges for smooth, clean cuts     without crushing.

• Operation:

    One-hand and two-hand operation possible.

    Manual opening and emergency release in any position.

    Lockable for transport in closed condition.

• Material & Finish:

    Tool steel, forged and oil-hardened.

    Black atramentized finish.

• Handles: Multi-component grips for comfort.
• Compliance:

    REACH: Does not contain SVHC substances.

    RoHS: Not applicable.

    Dimensions: 320 × 149 × 30 mm

Compact size, lightweight, high performance.

High transmission joint design makes cutting 20 % easier.

Especially precise cutter guide thanks to box joint fitted with additional stabilisation plate.

For cutting high-strength wire ropes up to Ø 4 mm and cable up to Ø 6 mm.

With a length of only 160 mm, significantly more powerful than many larger Wire Rope Cutters.

Convenient work thanks to opening spring.

Secured by locking device during transport.

Cutting edges additionally induction-hardened.

Ball bearing steel for a long service life.

For wire rope with Ø 4.00 / 1960 Nmm².

• Crimping capacity: 0.5–6.0 mm² (AWG 20–10), with three crimping profiles 
• Dimensions: 230 × 63 × 25 mm; Weight: approx. 250 g 
• Surface finish: black lacquered, polished 
• REACH compliant (no SVHC); RoHS not applicable 

Multi-purpose tool for cutting cables, stripping wires, and pressing insulated and non-insulated terminals and plug connectors.

Includes threaded holes for trimming copper and brass screws (M2.6, M3, M3.5, M4, M5).

Bolted joint ensures smooth and stable operation.

Made of high-strength special steel with black lacquer finish.

Ergonomic multi-component handles.

Technical Specs:

• Length: 240 mm
• Weight: 270 g
• Pressing range: 0.5–6.0 mm² (insulated terminals), AWG 20–10
• Pressing profiles: 3.

Universal, high-performance professional crimping pliers featuring a round quick-change magazine with three interchangeable dies, covering the most common crimping tasks. 

Enables quality results comparable to dedicated fixed-die pliers through precision-machined dies and an unlockable ratchet mechanism. 

Applications include:

Non-insulated open flat plug connectors (4.8 + 6.3 mm)

Insulated cable lugs, plug connectors, butt connectors

Insulated and non-insulated ferrules (end sleeves)

Crimping range: 0.5–6.0 mm², AWG 20–10. 

Technical Specifications:

Length: 250 mm, Width: 75 mm, Height: 28 mm

Weight: 770 g

Material: Chrome-vanadium electric steel, oil-hardened with a burnished finish; multi-component handles. 

Built-in factory-calibrated crimping pressure with finely graduated integral locking mechanism that releases automatically upon achieving optimal pressure; quick die-change without tools. 

One tool replaces three pliers, reducing weight and simplifying cable assembly tasks—ideal for installations requiring multiple cable types

• UTP- ja STP -kaablite jaoks, juhe Ø 0,4 - 0,8
• samaaegne alla surumine ja lõikamine
• tööriist asetamiseks plaadile, pesasse ja välialadele
• integreeritud tõmbekonks ja vabastustera

• Professional crimping pliers for Western plugs (RJ 11/12 – 6 poles, 9.65 mm; RJ 45 – 8 poles, 11.68 mm).
• Includes length cutter and stripping knife designed for flat, unshielded telephone cables (6 mm and 12 mm). 
• Ensures precise crimping with parallel compression, and consistent, high crimping quality thanks to an integrated locking mechanism (unlockable).
• Lever-action design reduces fatigue during use. 
• Also equipped with a cutter for round cables. 
• Material: chrome–vanadium special steel, oil-hardened; head is burnished; grips are multi-component. Dimensions: 190 × 76 × 24 mm; weight ≈ 295 g. 
• Compliance: REACH (free from SVHC); RoHS not applicable

• Püsivalt kõrge pressimiskvaliteet tänu täppislõugadele ja põrkemehhanismile (vabastatav)
• Presslõuad ei ole vahetatavad
• hea käsitseda tänu sobivale käepideme asendile, madalale kaalule, kompaktsele disainile ja ergonoomilise kujuga käepidemetele
• optimaalne jõuülekanne tänu ülekandemehhanismile võimaldab minimaalset jõupingutust
• tööriistad on tehases täpselt seadistatud (kalibreeritud)

Self-adjusting crimping tool for wire ferrules according to DIN 46228 Parts 1 + 4.

Automatically adapts to the ferrule size for precise and secure crimping.

Crimping range: 0.08 – 10 mm² (AWG 28 – 8).

Square crimp profile for optimal contact in terminal blocks.

Integrated lever mechanism reduces hand force for comfortable operation.

Made from high-grade special steel, oil-hardened for durability.

Ergonomic multi-component handles for safe and comfortable grip.

Technical Specifications:

• Length: 180 mm
• Weight: approx. 365 g
• Crimping capacity: 0.08 – 10 mm²
• Crimp profile: Square
• Compliance: DIN 46228 (Parts 1 + 4).

• Crimps wire ferrules ranging from 0.14 to 16 mm² (AWG 26–6) with a square crimp profile 
• Die head rotates 360° and locks in eight positions, enabling access from any working angle 
• Capable of crimping twin ferrules up to 2 × 6 mm²; extra-long ferrules accommodated via dual-side access
• Automatic size adjustment eliminates manual settings; includes ratchet mechanism for consistent quality 

Construction & Build:

• Made of chrome-plated chrome-vanadium electrical steel, oil-hardened 
• Chrome-plated head; handles feature multi-component grips 

Technical Specifications:

• Dimensions: approx. 200 × 80 × 26 mm
• Weight: approx. 478 g 
• Compliance: REACH compliant (contains SVHC); RoHS not applicable

• Light and slim design for easy handling.
• Also available as VDE version.
• Easy crimping thanks to optimized leverage and transmission ratio.
• For crimping wire ferrules according to DIN 46228 parts 1 + 4, covering sizes from 0.25 to 16 mm².
• Crimping in marked half-round dies ensures reliable connections between the sleeve and conductor.
• Features 9 particularly deep crimping dies with conical side faces for secure and precise crimps.
• Made of special tool steel, forged and oil-hardened for durability.
• Handles: plastic-coated for comfort.
• Head: polished finish.

Technical Specifications:

• Length: 180 mm
• Weight: approx. 205 g
• Crimping range: 0.25 – 16 mm² (AWG 24 – 6)
• Number of crimping positions: 9
• Compliance: REACH (does not contain SVHC), RoHS not applicable

Applications:

• Ideal for electrical installations, automotive wiring, IT systems, and domestic electronics.
• Ensures standard-compliant crimping for ferrules in various environments.

Multi-purpose tool for stripping wires and pressing terminals.

Suitable for insulated and non-insulated terminals.

Pressing range: 0.5 – 2.5 mm².

Integrated cutting edge for cable cutting.

Self-adjusting mechanism for wire stripping – fast and precise.

Ergonomic multi-component handles for comfortable grip.

Technical Specifications:

• Length: 180 mm
• Weight: approx. 190 g
• Functions: wire stripping, cable cutting, pressing terminals
• Compliance: DIN standards.

Combined tool for automatic wire stripping and pressing terminals.

Suitable for insulated and non-insulated terminals.

Pressing range: 0.5 – 2.5 mm².

Self-adjusting mechanism for wire diameter – fast and precise.

Integrated cutter for cable cutting.

Ergonomic multi-component handles for comfort.

Technical Specs:

• Length: 180 mm
• Weight: approx. 190 g
• Compliance: DIN standards.

• Capacity: 0.5–6.0 mm² (AWG 20–10)
• Crimping positions: 1
• Length: 180 mm × Width: 50 mm × Thickness: 13 mm
• Weight: approx. 209 g
• Surface finish: polished head, plastic-coated handles
• Compliance: REACH-compliant (no SVHC); RoHS not applicable

• Equipped with tools for photovoltaics
• Precision stripping pliers 12 12 12 (4.0 / 6.0 / 10.0 mm²) with adapted blades for larger stripping capacities
• Cable shears 95 16 165 for copper cables up to Ø 15 mm
• With Crimp System Pliers 97 43 200 A for interchangeable crimping dies, crimping pressure is precisely set at the factory (calibrated)
• Without crimping dies - please order separately (see ref. 97 49...) for individual assortment
• Assembly tool (Allen key) for changing the crimping dies
• Impact-resistant plastic case
• Foam insert with recesses for tools, 2 crimping dies (not included) and 2 locators (not included)
• External dimensions: 345 x 80 x 280 mm (W x H x D)

Fully insulated plastic pliers with fiberglass reinforcement for safe work up to 1 000 V AC/DC.

Ideal for meter assembly and blocking applications (“meter assembly and meter blocking”).

Temperature class C, operational down to –40 °C. 

Non-magnetic and spark-free – suitable for chemically aggressive environments.

Handles with soft-grip zones enhance comfort and control. 

Certified to DIN EN 60900 / IEC 60900 / VDE standards. 

• Length: 180 mm
• Weight: approx. 120–127 g 
• Dimensions: 180 × 53 × 17 mm 
• Standards: VDE / IEC 60900; REACH compliant (contains SVHC); RoHS compliance as applicable. 

• Length: 220 mm
• Weight: approx. 335 g (0.75 lbs) 

Cutting capacity:

• medium-hard wire (nail): Ø up to 2.4 mm
• hard (steel) wire: Ø up to 1.6 mm