Filters
Sort by Position Name: A to Z Name: Z to A Price: Low to High Price: High to Low Created on Sku: A to Z Sku: Z to A
Display 12 20 24 100 per page
Add to compare list Add to wishlist
51-3672202
For stable mounting of roller conveyors of the series MRB LC to Metallkraft circular saws. The adapters are specially designed for mounting to the right or left of the saws. Please indicate the machine type of your saw when ordering.Manufacturer
Add to compare list Add to wishlist
51-3620303SET
two cutting speeds rotatable machine head at 45 ° to the left and 45 ° to the right Reduction gear, silent in oil bath running automatic membrane coolant pump with coolant filter Vise with counter vise, quick release and anti-jaw clamping jaws guarantees a precise and burr-free cut lateral material support arm with roller Vice can be swiveled 45 ° to the left and 45 ° to the right movable protection device ensures optimum safety when cutting Control handle with safety switch Vise with counter vise, quick release and anti-jaw clamping jaws lateral material support arm with roller Vise longitudinally displaceable and thus suitable for longitudinal cuts and slits Quality Made in Europe Manufacturer Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de
Add to compare list Add to wishlist
51-3923141
Changing the sanding belt in seconds due to the quick-release system Automatic re-tensioning of the sanding belt using the spring-loaded belt tensioning system Easy adjustment of the belt run using the adjusting screw Can be used as a table model and also as a standing model with the optional base Powerful motors and vibration-free operation for the best sanding results Sanding belt can be changed in seconds thanks to the quick-clamping system Automatic retensioning of the sanding belt thanks to spring-supported belt tensioning system Large surface sanding area thanks to fold-away upper sanding belt cover Easy adjustment of the belt run via adjusting screw on the front contact roller Continuous sanding surface after removal of attachments enables sanding of long workpieces as well Can be used with and without suction One extraction nozzle on the spark box and one on the rear belt roller Protective screen can be folded away Can be used as a table model and, with the optional base, also as a floor model Manufacturer Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de
Add to compare list Add to wishlist
51-3661126
Material roller conveyor with stable U-shaped closed construction made of 3 mm sheet steel profile Support rollers made of galvanized steel (optionally also available with plastic rollers) Supported rollers ball-bearing The maximum measuring length is the length of the track minus the stop length 450 mm Length measuring device with handwheel adjustment Roller and measuring track with digital LED dimension display in mm, electrical connection 230 V, 50 Hz with power supply unit Measuring stop adjustable by handwheel from the workplace, with pneumatic brake for measuring fixation Sturdy material stop trolley, 12 ball bearings, movable on large dimensioned guide profile. The stop arm is adjustable and hinged. For roller conveyors with a length of more than 5 m, a cable drag chain is used Mounting side as desired right or left Equipment details position indicator 5-digit LED measurement display for constant, millimeter-accurate control of the current position of the stop car Position indicator with hollow shaft encoder mounted directly on the drive shaft Measuring accuracy / m: ± 0.5 mm stop arm 900 mm long stop arm Stop plate adjustable to zero point and manually hinged backwards Multiple ball bearings, thus free of play Quality Made in Germany Manufacturer Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de
Add to compare list Add to wishlist
51-3772125
The workpiece clamping by means of foot pedal thereby both hands remain free for the material supply Different tool variants available E, S2, HS2 and HSG The powerful auxiliary cylinder facilitates bending Next passage between top and bottom cheek of up to 25 mm Self-lubricating plain bearings Clamping pressure of the upper beam via non-slip thumbscrews easily adjustable Adjustment of material thickness by means of knurled screw Adjustable stop for bending angle Equipment details: FSBM 1270-20 E
With segmented sharp-bending tools, continuous bending strip and continuous bed support FSBM 1020-20 S2
With segmented sharpening tools, segmented bending strip and continuous bed support FSBM 1020-20 HSG
With segmented gooseneck tools, segmented bending bar and segmented bed support Segments have a hardness of HRC24-26 Note on technical data: Sheet thickness max.: Performance data based on material with tensile strength 400 N/mm² Bending capacity VA: factor 0.75 Bending capacity aluminum: factor 1.2 Hardened top tools are required to bend VA Manufacturer Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de
Add to compare list Add to wishlist
51-3779071
Foot operated Heavy, compact welded construction Powerful drive by Lenzemotors With continuous sharp bending bar In series with manual adjustment of the bending angle Especially low-maintenance The workpiece is clamped by a motorized mechanism S-models with segmented upper tools SH-models with high, segmented casting foot tools Available on request Other models Standard tools hardened Hardened sharp bending bar and bending bar Segmented tools and hardened bending bar Segmented casting foot tools and bending bar hardened Manufacturer Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de
Add to compare list Add to wishlist
51-3779002
Simple operation Heavy, compact welded construction Particularly low maintenance For easy bending with precise adjustment of the bending angle using a stop with scale Sheet thickness adjustable via bending beam Tools for VA on request: sharp bending rail and bending bar made of Toolox 33, segmented tools and bending bar made of Toolox 33 and segmented goat foot tools made of Toolox 33 Quality Made in Europe Manufacturer Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de
Add to compare list Add to wishlist
51-3940306
10" touchscreen NC control G1 for Y and Z axis Spindle bearing class P4 from NSK guaranteed concentricity of 0.002 mm Robust V flat guide with Turcite-B coating in the X and Z axes for grinding heavy workpieces Backlash-free ball screws in the Y and Z axes Optional extras: NC-controlled parallel puller and compensator on the grinding head, semi or fully automatic balancing device, full encapsulation of the grinding area, and much more Standard equipment 10" touchscreen NC control G1 for Y and Z axes Grinding modes: flat grinding, plunge grinding, cross grinding Spindle bearing class P4 from NSK guaranteed concentricity of 0.002 mm Turcite-B coating in the X and Z axes for grinding heavy workpieces Backlash-free ball screws in the Y and Z axes NC-controlled parallel pull-off and compensation device above the machine table Coolant device with magnetic separator Partial encapsulation of the work table with monitored door Infinitely variable speed of the grinding spindle thanks to an inverter Automatic, hydraulic X-axis feed Stepless adjustment of the X-axis speed via hydraulic reg elventil Automatic, motorized Z-axis feed driven by servo motor Adjustment of the end positions in X and Z-axis via joystick Automatic, motorized Y-axis feed with servo motor electronic handwheel for the Y and Z axes automatic central lubrication of all axes/guides optional special equipment NC controlled parallel pulling and compensating device on the grinding head Automatic balancing device Full encapsulation of the grinding area with two sliding doors Additional grinding wheel flanges Increased motor performance Manufacturer Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de
Add to compare list Add to wishlist
51-3693100
Two-column guided bandsaw for sawing solid bars and bar profiles Mitsubishi FX 5 control system with simple operation via 4.3" touchscreen Cutting movement via hydraulic cylinder With BRP (cutting feed control): if a set ampere limit is exceeded, the feed movement is stopped while the saw band continues to run in order to convey chips out of the cutting channel. Once the normal load is reached, the sawing process continues Robust machine body and the smallest possible distances between the saw blade, machine guide and workpiece minimize vibrations for maximum sawing performance Infinitely variable cutting speed from 15 - 150 m/min Saw blade drive via bevel gearbox, asynchronous motor and frequency converter Material is clamped in front of and behind the cut using a two-part vice Pressure adjustment of the hydraulic vice clamping via control valve with pressure gauge Saw blade inclination of 7° and hydraulic saw blade tension increase the service life of the saw blade Front band guide moves automatically parallel to the movable vice jaw Electrically driven chip clearing brush Emulsion cooling with liquid distribution into the saw blade guides and directly into the cutting channel More powerful motor optionally available Saw blade guides with integrated cooling system Manufacturer Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de
Add to compare list Add to wishlist
51-3779111
Foot operated Heavy, compact welded construction Powerful drive by Lenzemotors With continuous sharp bending bar In series with manual adjustment of the bending angle Especially low-maintenance The workpiece is clamped by a motorized mechanism S-models with segmented upper tools SH-models with high, segmented casting foot tools Available on request Other models Standard tools hardened Hardened sharp bending bar and bending bar Segmented tools and hardened bending bar Segmented casting foot tools and bending bar hardened Quality Made in Europe
Note on technical data For bending stainless steel, optional hardening of the tools is required
Manufacturer Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de
Add to compare list Add to wishlist
51-3779421
Very heavy and robust welded construction Dynamic drive of the bending beam by means of two frequency-controlled motors with gears Over cheek clamping via trapezoidal thread High-quality Lenze motors Continuous sharp bending rail Tools suitable for bending stainless steel Bending angle adjustment via touchscreen NC control system Sheet thickness adjustment manually at the bending beam Manual crowning device of the bending beam Operation via double foot pedal with emergency stop function Clean motor-driven machine without hydraulics SH models with segmented, high goat foot tools DUO models with continuous sharp-bending rail and high, segmented goat foot tools Quality made in Germany
Manufacturer Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de
Add to compare list Add to wishlist
51-3779073
Foot operated Heavy, compact welded construction Powerful drive by Lenzemotors With continuous sharp bending bar In series with manual adjustment of the bending angle Especially low-maintenance The workpiece is clamped by a motorized mechanism S-models with segmented upper tools SH-models with high, segmented casting foot tools Available on request Other models Standard tools hardened Hardened sharp bending bar and bending bar Segmented tools and hardened bending bar Segmented casting foot tools and bending bar hardened Manufacturer Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de
Add to compare list Add to wishlist
51-3779410
Very heavy and robust welded construction Dynamic drive of the bending beam by means of two frequency-controlled motors with gears Over cheek clamping via trapezoidal thread High-quality Lenze motors Continuous sharp bending rail Tools suitable for bending stainless steel Bending angle adjustment via touchscreen NC control system Sheet thickness adjustment manually at the bending beam Manual crowning device of the bending beam Operation via double foot pedal with emergency stop function Clean motor-driven machine without hydraulics SH models with segmented, high goat foot tools DUO models with continuous sharp-bending rail and high, segmented goat foot tools Quality made in Germany
Manufacturer Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de
Add to compare list Add to wishlist
51-3753013
Sturdy and robust welded construction Suitable for cutting steel and non-ferrous metals Due to the foot control both hands remain free for the material supply Large dimensioned viewing window made of Plexiglas High-quality knife bar made of steel link guide Easy adjustment of the cutting blade via eight screws Angle adjustable side stop with millimeter scale Standard cut line lighting Optimum price-performance ratio Manufacturer Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de
Add to compare list Add to wishlist
51-3661128
Material roller conveyor with stable U-shaped closed construction made of 3 mm sheet steel profile Support rollers made of galvanized steel (optionally also available with plastic rollers) Supported rollers ball-bearing The maximum measuring length is the length of the track minus the stop length 450 mm Length measuring device with handwheel adjustment Roller and measuring track with digital LED dimension display in mm, electrical connection 230 V, 50 Hz with power supply unit Measuring stop adjustable by handwheel from the workplace, with pneumatic brake for measuring fixation Sturdy material stop trolley, 12 ball bearings, movable on large dimensioned guide profile. The stop arm is adjustable and hinged. For roller conveyors with a length of more than 5 m, a cable drag chain is used Mounting side as desired right or left Equipment details position indicator 5-digit LED measurement display for constant, millimeter-accurate control of the current position of the stop car Position indicator with hollow shaft encoder mounted directly on the drive shaft Measuring accuracy / m: ± 0.5 mm stop arm 900 mm long stop arm Stop plate adjustable to zero point and manually hinged backwards Multiple ball bearings, thus free of play Quality Made in Germany Manufacturer Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de
Add to compare list Add to wishlist
51-3815430
Sliding upper beam with adjustable flat guides Manual backgauge with 550 mm travel range Solid 90° side fence with 1000 mm length, T-slot, tilting cam and scale LED cutting line lighting and slotted holes in the top cover for an optimum view of the cutting edge for cutting on tear High-quality, rotatable knives suitable for cutting stainless steel Heavy-duty hold-down beam with material-friendly polyurethane inserts suitable for cutting stainless steel Heavy-duty hold-down bar with material-friendly polyurethane inserts Rear area protected by light barrier Operation via mobile foot pedal console with emergency stop Manufacturer Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de
Add to compare list Add to wishlist
51-3776101
For accurate cold and hot bending of flat, round and square steels Stable design for screwing on the workbench Holes in the cast bed for fixing on the workbench Infinitely adjustable bend stop With eccentric quick-release for efficient work Bending angle up to 120 ° High repeat accuracy due to bending angle stop Ideal for repair shops and locksmiths Manufacturer Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de
Add to compare list Add to wishlist
51-3661717
Stable U-shaped closed construction made of 3 mm sheet steel profile Support rollers made of galvanized steel All roller conveyors of the MRB standard series also available with plastic rollers Supported rollers ball-bearing The maximum measuring length is the length of the track minus the stop length 400 mm Precision flat steel guide attached to the back of the roller conveyor Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable Robust stop arm attached to the stop truck, adjustable to the tool (0 point) With length measuring device and digital dimensioning system Roller and measuring track with battery-operated LCD display and magnetic tape measuring system Quality Made in Germany Please specify when ordering mounting side and height!
Working height up to 1020 mm possible with optional foot plates.
By request:
Working height from 1020 mm can be extended from the factory Also with 500 mm web width Manufacturer Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de
Add to compare list Add to wishlist
51-3779031
Semi-motor version - manual operation of the upper cheek, bending process motorised Designed for professional use With foot operation heavy, compact weldment With continuous sharp bending rail Standard with manual adjustment of the bending angle by means of nonius ring Particularly low-maintenance S-models with segmented top tools SH models with high, segmented goat foot tools Hardening of standard tools available on request: sharp bending rail and bending strip hardened, segmented tools and bending strip hardened, segmented goat foot tools and bending strip hardened Further swivel bending machines available on request Quality Made in Europe
Manufacturer Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de
Add to compare list Add to wishlist
51-3704015SET
For use in the metalworking industry for grinding, structuring and polishing tasks, especially in the stainless steel sector 225 mm balanced belt rollers ensure optimum and low-vibration drive Infinitely variable belt speed of 4.5 - 27 m/s thanks to frequency shaper With electric table height adjustment With split table that can be opened, drawer sanding unit and integrated work table lighting Smooth-running sanding table even under load Easy adjustment of the sanding belt Profile roller sanding pad, resulting in less tarnishing during the sanding process Right-left rotation as standard Manufacturer Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de
