NEO

NEO TOOLS' O1 SR Neo Air professional half boots, size 45, 82-782-45 is a model with an upper made of polyester fabric, a knitted mesh lining, a PU/PU sole and a HI-POLY foam insole. The shoe is made in the O1 SR category, indicating resistance to slipping on ceramic ground covered with sodium lauryl sulphate solution (SLS) and the absence of a protective sole. In addition, there is a Neo Air cushion in the back of the sole for greater comfort when walking. The NEO TOOLS brand model is CE certified.

NEO TOOLS' O1 SR Neo Air work half-boots, size 44, 82-782-44 is a model with an upper made of polyester fabric, a knitted mesh lining, a PU/PU sole and a HI-POLY foam insole. The shoe is made in the O1 SR category, indicating resistance to slipping on ceramic ground covered with sodium lauryl sulphate solution (SLS) and the absence of a protective sole. In addition, there is a Neo Air cushion in the back of the sole for greater comfort when walking. The NEO TOOLS brand model is CE certified.

NEO's special socks made of high-quality cotton with the addition of polyester, elastane and acrylic, ensure comfort and hygiene at work. Reinforcements have been applied on toes and heels to protect against quick abrasion. In discreet black colour with orange-grey inserts.

NEO transport belt (ref. 84-140) is a set of 2 belts with lengths of 4.5 m and 0.5 m and a width of 50 mm. It is used for securing loads and smaller objects against movement. It has a ratchet on both sides for tightening the belt and steel hooks for fastening. Nominal strength is up to 5 tonnes. The belt is CE certified. It was made according to the EN-12195-2 standard.

Velcro sanding paper 93 x 185 mm, P80, 5 pcs, with holes 55-738 by NEO TOOLS with dimensions 93 x 185 mm. It is characterised by gradation P80 and has a rectangular shape. The paper is recommended for use with wood, metal and plastic. The Velcro fastening facilitates efficient and fast changes. The NEO TOOLS paper has 8 dust extraction holes - each with a diameter of 10 mm, offering comfortable dust-free working and thus more efficient sanding without overheating the material. The NEO TOOLS set of 5 93 x 185 mm sanding papers is recommended for professionals and experienced do-it-yourselfers.

Impact bit extension 150mm 56-558 by NEO TOOLS with a total length of 150mm. It was made of durable CrV steel. It is characterised by a ¼" HEX handle and has a practical magnetic tip, which facilitates the installation of bits. The bit is compatible with impact tools, designed to operate at a maximum speed of 2,000 rpm. NEO TOOLS brand item recommended for professionals and DIY enthusiasts.

Accessories for mini grinder, set of 99 pieces 55-084 by NEO TOOLS is a set that consists of 99 carefully selected items, allowing you to get the most out of your machine. The set includes: 4 drills, 6 cutters, 2 arbors for the cutting disc and sanding stone, 1 arbor for the felt discs and 2 arbors for the sanding belt, as well as 16 sanding belts. The set includes felt discs (1 25 mm and 4 15 mm), a 25 mm material disc, 6 20 mm sanding stones in pink and 6 20 mm sanding stones in green, a 10 x 10 x 25 mm sanding block and a polishing felt on a "bullet" shaped mandrel. For cutting, 30 25 mm cutting discs and 4 35 mm cutting discs are provided, and for sanding, a 25 mm sanding disc. The NEO TOOLS brand set is completed with a mini grinder spanner, 3 collets, 4 sanding stones on an orange mandrel, 2 sanding stones on a green mandrel, 2 nylon brushes and polishing paste, allowing for a comprehensive handling of different tasks with one machine.

HSS-CNC metal drill bits, 124°, "Pro-Tec", 1.0 - 13.0 mm, set of 25 pieces, 55-090 by NEO TOOLS are deeply ground according to DIN 338 and made of M2 steel. The 124° tip geometry with E-type shear correction facilitates drilling without scoring and stable tool guidance. The working part lengths are 1:12 mm, 1.5:18 mm, 2:24 mm, 2.5:30 mm, 3:33 mm, 3.5:39 mm, 4:43 mm, 4.5:47 mm, 5:52mm, 5.5:57mm, 6:57mm, 6.5:63mm, 7:69mm, 7.5:69mm, 8:75mm, 8.5:75mm, 9:81mm, 9.5:81mm, 10:87mm, 10.5:87mm, 11:94mm, 11.5:94 mm, 12:101 mm, 12.5:101 mm, 13:101 mm, and total 1:34 mm, 1.5:40 mm, 2:46 mm, 2.5:57 mm, 3:61 mm, 3.5:70 mm, 4:75 mm, 4.5:80 mm, 5:86 mm, 5.5:93 mm, 6:93 mm, 6.5:101 mm, 7:109 mm, 7.5:109 mm, 8:117 mm, 8.5:117 mm, 9:125 mm, 9.5:125 mm, 10:133 mm, 10.5:133 mm, 11:142 mm, 11.5:142 mm, 12:151 mm, 12.5:151 mm, 13:151 mm - Recommended maximum speeds are 1:3500 rpm, 1.5:3000 rpm, 2:2500 rpm, 2.5:2200 rpm, 3:2000 rpm, 3.5:1900 rpm, 4:1800 rpm, 4.5:1600 rpm, 5:1500 rpm, 5.5:1300 rpm, 6:1300 rpm, 6.5:1200 rpm, 7:1100 rpm, 7.5:1000 rpm, 8:1000 rpm, 8.5:800 rpm, 9:800 rpm, 9.5:800 rpm, 10:800 rpm, 10.5:650 rpm, 11:600 rpm, 11.5:600 rpm, 12:500 rpm, 12.5:500 rpm, 13:500 rpm. NEO TOOLS drills are intended for drilling in steel, cast iron, non-ferrous metals (copper, aluminium, brass) and plastics.

Mortar Mixer 590 x 120 mm, M14 thread, 58-782-96 by NEO TOOLS is a two-part mixer designed for mixing mortar. It has a length of 590 mm, a working part diameter of 120 mm and an M14 thread, allowing it to be fitted to compatible mixers equipped with this standard type of attachment. It will be invaluable on construction sites and during finishing work.

NEO 1/2" long bihexagonal socket (ref. no. 08-070) is made of durable chromium vanadium steel in accordance with DIN 3124. Tool quality confirmed with TÜV certificate and 25 years manufacturer's warranty. NEO brand meets expectations of professionals.

NEO silicone caulking gun (ref. no. 61-004) with working length for tube 240 mm. Designed for tubes with approx. 300 ml volume. 1.7 mm thick sheet ensures long service time of the tool. Double guide allows to extrude even the most dense substances. NEO brand meets expectations of professionals.

The laser rangefinder, 80 m range, IP54, 75-208 by NEO TOOLS is a device made in protection class IP54 and class II. It is characterised by a range of 0.05 to 80 m and a laser beam length of approximately 620-690 nm. The NEO TOOLS rangefinder is powered by 3 AAA NI-MH rechargeable batteries or 3 AAA alkaline batteries. Equipped with a memory for the last 50 measurements, as well as the possibility of resetting the data. With a battery indicator and error messages, it is easy to use. The rangefinder supports the following units of measurement: m, in, ft. With it you can measure distance, area, volume, single and continuous measurements, Pythagoras, addition and subtraction, maximum and minimum measurement. It also allows measurement from the beginning and end of the device. Equipped with an electronic 0-90 degree protractor, it allows the user to quickly and easily determine different spaces. The laser on this device has an automatic shut-off time of 30 seconds and the rangefinder itself has an automatic shut-off time of 3 minutes. It is handy and lightweight, its dimensions are 120 x 50 x 25 mm. It is offered with a wrist strap, carrying case, three AAA batteries and instructions. It will work well for both professional and amateur use.

Long hexagonal socket 1/2" NEO made ​​of durable chrome-vanadium steel . Knurled surface improves the grip of the socket. Product reliability is confirmed with 25 years warranty. NEO brand meets expectations of professionals.

Gas soldering lamp for 190 g cartridges, piezo ignition, 360 degrees, for working in any position 20-070 by NEO TOOLS is a device with piezo ignition, characterised by an output of 1.7 kW. It features an average gas consumption of 123 g/h and adaptation to standard 190 g cartridges. Thanks to its ability to work in any position (360-degree system), it will prove useful for many tasks and demanding soldering projects commissioned by professionals. The maximum operating temperature of 1,300°C ensures efficiency, while the plastic housing provides the right ratio of weight to ergonomics.

Fiat NEO petrol and diesel engine timing lock set is a set of tools for locking timing wheels on Fiat cars. The set includes elements for locking the timing gear in petrol and diesel engines. It provides basic tools for setting and blocking the engine. The set is packed in a suitcase

Long hexagonal socket 1/2" NEO made ​​of durable chrome-vanadium steel . Knurled surface improves the grip of the socket. Product reliability is confirmed with 25 years warranty. NEO brand meets expectations of professionals.

Electroplated nails for pneumatic stapler (14-570), GA18, Type 300 (F), length 25 mm, 4000 pieces 14-653 by NEO are steel nails, electroplated and therefore corrosion-resistant. They are designed for the NEO 14-570 pneumatic stapler. They are characterised by a length of 25 mm, type 300 (F), GA18. They are offered in a set of 4000 pieces. Nails recommended for all kinds of work with pneumatic staplers. They will be suitable for professional applications.

The 16.5 cm folding knife, 63-182-1 by NEO TOOLS is a set of 5 multi-purpose tools that are always good to have on hand. The folding knife model in robust 3Cr13 stainless steel is the right choice for a variety of projects. It will work equally well for home use, in the workshop or on a survival trip. The overall length of the tool is 165 mm, while the blade length is 65 mm. The NEO TOOLS folding knife has a built-in belt clip and a safety lock to prevent unexpected closure.

The 50-75 mm vernier micrometer 75-022 by NEO offers a measurement accuracy of ±0.01 mm. It is a specialist measuring instrument for measuring the geometric dimensions of objects. It is characterised by a length of 190 mm, a width of 100 mm and a height of 25 mm. Its weight is 470 g. The micrometer features high quality workmanship - an easy-to-read scale/neck, smooth drum operation and precise measurement. The tool is easy to use. The set is offered with a zeroing key, a standard and a practical plastic box. The NEO brand is recommended for professionals and DIY enthusiasts.

Long hexagonal socket 1/2" NEO made ​​of durable chrome-vanadium steel . Knurled surface improves the grip of the socket. Product reliability is confirmed with 25 years warranty. NEO brand meets expectations of professionals.