NEW PRODUCTS

NEO TOOLS' 97-646K-10 work gloves are a robust and durable polyester coated polyurethane (smooth) glove for a wide range of applications - transport work, gardening, construction, moving and storage, assembly work, small parts production and DIY. NEO TOOLS work gloves are made in category II, 4131X. They are certified to EN388 and EN420 standards, guaranteeing abrasion resistance class 4 (0 to 4), sharp object cut resistance 1 (0 to 5), tear resistance 3 (0 to 4), puncture resistance 1 (0 to 4) and cut resistance according to EN ISO 13997 X. They fit perfectly in the hand and are available in a wide range of sizes from 7 to 11".

The 10 TPI, HCS, 65 mm 57T508 plunge-cutting blade for the multifunction machine by GRAPHITE is a tool made of durable carbon steel (HCS), with a working width of 65 mm and 10 TPI. The blade is designed for plunge cutting in wood. The use of three-sided sharpened teeth and their spacing of 2.5 mm - enables fast and precise cutting. The maximum cutting depth is 40 mm and the blade thickness is 0.7 mm. The Multifunction Saw Blade from the GRAPHITE brand is the choice for efficient wood cutting in assembly and renovation work.

Sanding discs, perforated, Velcro with holes 225 mm, P80, 5 pieces 58T272 by GRAPHITE is a set of 5 pieces of sanding discs, designed for sanding plaster and drywall. It is compatible with "giraffe" type sanders and cantilever devices, with a diameter of 225 mm. GRAPHITE discs are equipped with perforated holes on the entire surface, so that the sanding dust is discharged smoothly during work. At the same time, the work surface does not get too hot during sanding, and the Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by an electro-corundum grain and an open type of grit. GRAPHITE abrasive discs are recommended for many tasks.

Work boots S3L SR FO, metal-free, size 46, 82-167-46 by NEO TOOLS is a product belonging to the category of safety footwear, designed to protect the wearer's feet from injuries that may occur during accidents at work. With an upper made of waterproof nubuck, a knitted 'mesh' lining and composite toecaps designed to provide protection against impacts with an energy equal to 200J and against compression equal to at least 15 kN, the footwear's overall comfort is enhanced. The non-slip, abrasion-resistant sole with an absorption system for shock, oil, petrol and other organic solvents - is also resistant to slipping on a ceramic base coated with sodium lauryl sulphate solution (SLS) and on a steel base coated with glycerol. NEO TOOLS brand work boots also have an integrated kevlar anti-puncture insole to protect against punctures from the ground and an anti-electrostatic insole. They are recommended for workplaces in warehouses, construction sites, mechanical plants and wherever there is a requirement to use footwear that is safe in its protection class. The product has undergone conformity assessment and meets the standards in force in the European Union.

Iron sanding papers, Velcro 98 x 140 mm, P180, 5 pieces, with 5 holes 58T321 by GRAPHITE are papers available in a set of 5 pieces with 5 holes, designed for metal, wood and plastic. The sheets use a type C paper base, suitable for machine sanding. They have a semi-open mesh with 100% abrasive grain (electrocorundum) on the surface, ensuring efficient working and reducing clogging. The Velcro attachment allows easy and quick attachment to the tool.

S1 FO leather sandals, steel toecap, size 47, 82-099-47 by NEO TOOLS are sandals made in protection class S1 FO. Equipped with a steel toecap, they provide protection against impacts with an energy equal to 200J. The protection category also guarantees that the sole of the shoe is resistant to hydrocarbons, such as oil or petrol. The NEO TOOLS work sandal has a leather upper, textile lining, EVA foam insole and PU/PU sole. It provides anti-static properties and absorption in the heel area. Ventilation holes offer adequate ventilation during the warm summer months. NEO TOOLS brand footwear is made in accordance with EN ISO 20345 and is perfect for everyday use by professionals.

OUTDOOR T-shirt, forest, size XXXL, 81-644-XXXL by NEO TOOLS is a comfortable short-sleeved t-shirt characterised by its olive-green colour and original print on the front. The photoprint graphic depicts a forest with the slogan , "do everything". The T-shirt is made of 100% soft cotton. It has a weight of 180 g/m2. Raglan sleeves and a round neckline with elasticated piping ensure a comfortable fit. The printed logo on the nape of the neck and the name tag on the neck underline the attention to detail. The NEO TOOLS T-shirt is a unique in-house design, offering the highest possible quality for everyday wear.

The Hex 4.0 mm 56T401 concrete drill bit by GRAPHITE is a hex shank HEX drill bit with a diameter of 4 mm, an overall length of 75 mm and a working length of 23 mm. Recommended for working with hard materials including: concrete, brick and stone. The GRAPHITE concrete drill bit will be suitable for do-it-yourselfers.

Half work boots, S1 SR FO, composite toecap, size 39, CE, 82-155-39 by NEO TOOLS are professional footwear that protects the foot against cold, softening and water soaking. The footwear is very comfortable, does not contain metal elements which makes the shoes lighter and undetectable at metal gates. An anti-slip sole with a shock-absorbing system, resistant to abrasion, oil, petrol and other organic solvents (FO), as well as a composite insole, reinforced toecap and back of the shoe are not all the advantages of this product. The anti-electrostatic properties of the insole further enhance the model's usability. The shoes are lightweight and have a fashionable design and are CE certified and EN ISO 20345:2022 compliant.

The Hex 3.0 mm 56T400 concrete drill bit by GRAPHITE is a hex shank HEX drill bit with a diameter of 3 mm, an overall length of 60 mm and a working length of 14 mm. Recommended for working with hard materials including: concrete, brick and stone. The GRAPHITE concrete drill bit will be suitable for do-it-yourselfers.

GRAPHITE's 33mm 56T738 tungsten tipped hole saw is designed for use in brick, hollow block, cellular concrete, plasterboard and lightweight building materials. It has a height of 68mm and provides a drilling depth of 57mm. The cutting edge of the hole saw is coated with a tungsten carbide coating and has a maximum speed of 1,200 rpm. The tool is designed for use with the 56T744 tungsten carbide hole saw blade and 56T745 pilot drill. It can be used for any installation work, such as fitting power sockets, distribution boxes or pipes. It can also be used for cable conduit pipes, ventilation pipes or installation fans in the kitchen or bathroom.

The combination disc for 59G371, 57H696 by GRAPHITE is a disc designed for the paving machine with part number 59G371. The 150mm diameter triple set, with a 22.2mm mounting hole, is designed for grooving in concrete - no chiselling required. The cross-shaped segments create a clean 30 mm wide slot, making it easy to achieve even furrows. The GRAPHITE saw blade features 36 segments with a diamond segment height of 9.5 mm and an overall width of 27 mm, and has a maximum speed of 10,200 rpm. The product meets the requirements of EN 13236, which confirms its suitability for working with concrete.

Jigsaw blade, 6 TPI, HCS, U-shaped handle, 2 pieces, clean cut 57T524 by GRAPHITE is a jigsaw blade with 6 TPI tooth density, made of HCS and equipped with a U-shaped handle. The set includes 2 pieces. It has an overall length of 100 mm, a working length of 74 mm, a width of 8 mm, a thickness of 1.5 mm and a tooth spacing of 4 mm. Suitable for cutting softwood, chipboard, carpenter's plywood and fibreboard 10-45 mm thick. The GRAPHITE brand blade enables clean cutting.

S1 FO leather sandals, steel toecap, size 45, 82-099-45 by NEO TOOLS are sandals made in protection class S1 FO. Equipped with a steel toecap, they provide protection against impacts with an energy equal to 200J. The protection category also guarantees that the sole of the shoe is resistant to hydrocarbons, such as oil or petrol. The NEO TOOLS work sandal has a leather upper, textile lining, EVA foam insole and PU/PU sole. It provides anti-static properties and absorption in the heel area. Ventilation holes offer adequate ventilation during the warm summer months. NEO TOOLS brand footwear is made in accordance with EN ISO 20345 and is perfect for everyday use by professionals.

NEO TOOLS insulated work boots S1 SR CI FO, composite toecap, size 45, 82-177-45 by NEO TOOLS are protective footwear made in the S1 SR CI FO category. They are equipped with a composite sole providing protection against impacts with an energy equal to 200 J. The upper is made of nubuck, polyester knitted fabric and TPR. These NEO TOOLS brand shoes have a knitted mesh lining, a HI-POLY foam insole and a PU/PU sole. The model features anti-electrostatic properties, a built-in heel and energy absorption in the heel area. TPR reinforcements on the tips and heel increase the shoes' resistance to damage, and a reflective thread in the laces improves their visibility. NEO TOOLS insulated work boots are CE certified.

HSS metal drill bit, DIN 340, 13 mm, 54T912 by GRAPHITE is a metal drill bit characterised by a diameter of 13 mm, an overall length of 205 mm and a working part length of 134 mm. It is made from HSS high speed steel. It has a cylindrical chuck and a 118° drill sharpening angle. It features compliance with DIN 340 and is suitable for any DIY enthusiast.

NEO TOOLS insulated work boots S1 SR CI FO, composite toecap, size 40, 82-177-40 by NEO TOOLS are protective footwear made in the S1 SR CI FO category. They are equipped with a composite sole providing protection against impacts with an energy equal to 200 J. The upper is made of nubuck, polyester knitted fabric and TPR. These NEO TOOLS brand shoes have a knitted mesh lining, a HI-POLY foam insole and a PU/PU sole. The model features anti-electrostatic properties, a built-in heel and energy absorption in the heel area. TPR reinforcements on the tips and heel increase the shoes' resistance to damage, and a reflective thread in the laces improves their visibility. NEO TOOLS insulated work boots are CE certified.

GRAPHITE's delta sanding papers, Velcro 93 x 93 mm, P60, 5 pieces, with 6 holes 58T325 are papers available in a set of 5 pieces with 6 holes, for metal, wood and plastics. The sheets use a type C paper base, suitable for machine sanding. They have a semi-open mesh with 100% abrasive grain (electrocorundum) on the surface, ensuring efficient working and reducing clogging. The Velcro attachment allows easy and quick attachment to the tool.

S3L SR FO work boots, metal-free, size 42, 82-167-42 by NEO TOOLS is a product belonging to the category of safety footwear, designed to protect the wearer's feet from injuries that may occur during accidents at work. With an upper made of waterproof nubuck, a knitted 'mesh' lining and composite toecaps designed to provide protection against impacts with an energy equal to 200J and against compression equal to at least 15 kN, the footwear's overall comfort is enhanced. The non-slip, abrasion-resistant sole with an absorption system for shock, oil, petrol and other organic solvents - is also resistant to slipping on a ceramic base coated with sodium lauryl sulphate solution (SLS) and on a steel base coated with glycerol. NEO TOOLS brand work boots also have an integrated kevlar anti-puncture insole to protect against punctures from the ground and an anti-electrostatic insole. They are recommended for workplaces in warehouses, construction sites, mechanical plants and wherever there is a requirement to use footwear that is safe in its protection class. The product has undergone conformity assessment and meets the standards in force in the European Union.