NEW PRODUCTS

Manufacturer
Aircraft Kompressorenbau und Maschinenhandel GmbH
Gewerbestraße Ost 6, 4921 Hohenzell, Austria
info@aircraft.at

Manufacturer
Aircraft Kompressorenbau und Maschinenhandel GmbH
Gewerbestraße Ost 6, 4921 Hohenzell, Austria
info@aircraft.at

• EasyTRONIC MICRO II electronic control with pressure sensor operation as standard, thus preventing motor overload, reducing wear and extending service life
• With star-delta switch
• High cooling effect and lower noise level due to thermostatically controlled radial fan
• Operating hours counter records load and overrun times, thus ensuring compliance with maintenance intervals - Indication of maintenance requirement via automatic message
• Rotation direction control for the motor avoids possible damage during commissioning or after a change of location
• Screw compressor with wear-resistant Poly V ribbed belt drive and slide clamping system
• Easy maintenance due to easily accessible elements
• Optimum operating temperatures due to thermostatically controlled fan, optimum cooling air flow and generously dimensioned heat exchanger, thus longer service life, lower fluctuations in oil temperature than with thermostat control
• Aftercooler as standard, thus less effort for drying and filtration of the generated compressed air
• Small external dimensions, thus easy transport and installation
• Fifteen-year warranty against rusting through on the inside and outside of hot-dip galvanized compressed air tanks

Manufacturer
Aircraft Kompressorenbau und Maschinenhandel GmbH
Gewerbestraße Ost 6, 4921 Hohenzell, Austria
info@aircraft.at

• The two-stage compression 2-cylinder high-performance unit achieves a very low rotational speed, resulting in a particularly quiet and low-vibration run
• This ensures a longer life due to less wear
• Large fan wheel and a cooling air baffle on the cylinder for optimum cooling of the compressor
• Aftercooler with cooling fins and intercooler to the aftercooler ensure a low container inlet temperature and thus less moisture in the compressed air
• High quality electric motor with high torque
• Electric motor equipped with motor protection switch
• With high-quality CONDOR pressure switch
• Equipped with a pressure gauge for tank pressure and a ball valve on the compressed air tank
• Compressed air tank equipped with safety valve, container pressure gauge and condensate drain tap
• Ten-year rust-through warranty on powder-coated compressed air tank
• With all safety devices
• Fully wired
• Stable belt guard made of metal
• Including swinging elements
• Connection to grid by qualified electrician

Manufacturer
Aircraft Kompressorenbau und Maschinenhandel GmbH
Gewerbestraße Ost 6, 4921 Hohenzell, Austria
info@aircraft.at

• Space-saving single compressor with ribbed belt drive
• With control ETM II including direction of rotation control
• Especially suitable for companies that have a continuous air requirement, but want a compact unit with a reduced noise level and low operating costs
• Standard supersonic insulation allows installation in sensitive rooms
• Intensive cooling warrantys operational safety and good air quality
• Standard with star-delta connection
• Ideal also suitable for supplementing existing systems, eg for covering the compressed air base load
• Standard with thermal motor protection, oil temperature monitoring (max 110 °C) and operating hours counter, ensuring high operational safety
• Service-friendly due to optimal accessibility and easy disassembly and assembly of all important components
• Fifteen-year rust-through warranty on inside and outside hot-dip galvanized compressed air tank

Manufacturer
Aircraft Kompressorenbau und Maschinenhandel GmbH
Gewerbestraße Ost 6, 4921 Hohenzell, Austria
info@aircraft.at

• Innovative LOGIN control with 4.3" touch screen for easy operation and complete control over all functions
• Connection of up to eight compressors possible, no matter if with constant or variable speed
• All information on current operating status at a glance
• Rotation direction control for the motor, prevents damage during start-up or after a change of location
• Low noise emission (only max. 67 dB) during operation, due to extremely low speed of the screw compressor and use of a low-noise radial fan
• Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled centrifugal fan, optimum cooling air flow and generously dimensioned heat exchangers
• Aftercooler reduces the effort for drying and filtration of the generated compressed air
• Service-friendly: easy removal and installation of all components requiring maintenance

Energy saving through frequency control

• Ideal for frequently changing compressed air consumption
• Compressor delivery rate adjusts to actual consumption
• Electronic control monitors motor and compressor speed and keeps line pressure constant even when consumption fluctuates widely

Manufacturer
Aircraft Kompressorenbau und Maschinenhandel GmbH
Gewerbestraße Ost 6, 4921 Hohenzell, Austria
info@aircraft.at

• Innovative LOGIN control with 4.3" touch screen for easy operation and full control of all functions.
• Rotation direction control for the motor, prevents damage during start-up or after a change of location
• High cooling effect and low noise level due to thermostatically controlled radial fan
• Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled centrifugal fan, optimum cooling air flow and generously dimensioned heat exchangers
• Aftercooler reduces the effort for drying and filtration of the generated compressed air
• Easy to service: simple removal and installation of all components requiring maintenance

Latest generation IE4 permanent magnet motor for max. energy efficiency

• Larger speed/load range
• Larger delivery volume supply range
• Extremely energy efficient - up to 50% energy consumption savings compared to a "fixed speed" model
• Very quiet operation - only 64 dB

Energy saving through frequency control

• Ideal for frequently changing compressed air consumption
• Compressor delivery rate adjusts to actual consumption
• Electronic control monitors motor and compressor speed and keeps line pressure constant even when consumption fluctuates widely
• Advanced and efficient cutting-edge technology in the smallest possible space

Manufacturer
Aircraft Kompressorenbau und Maschinenhandel GmbH
Gewerbestraße Ost 6, 4921 Hohenzell, Austria
info@aircraft.at

• Large fan wheel and a cooling air baffle on the cylinder for optimum cooling of the compressor
• Aftercooler with cooling fins for low vessel inlet temperature and less moisture in the compressed air
• Sturdy metal belt guard
• "Made in Germany": vessel pressure gauge; filter pressure regulator with pressure gauge for regulated compressed air cleaned of condensate, dirt and oil
• Ten-year warranty against rust-through on powder-coated compressed air reservoir
• Including high-quality composite safety coupling and high-quality CONDOR pressure switch

• Two-cylinder high-performance units made of gray cast iron for a long service life.
• Large fan wheel and a cooling air baffle on the cylinder for optimal cooling of the compressor
• Quality electric motor with high starting torque
• Electric motor equipped with motor protection switch
• Aftercooler with cooling fins ensures a low tank inlet temperature and thus less moisture in the compressed air
• Sturdy metal belt guard
• Start-up capacitor and start-up relief valve ensure easy start-up on 230 volt models
• Container pressure gauge "Made in Germany
• Filter pressure regulator with pressure gauge "Made in Germany" for regulated compressed air cleaned of condensate, dirt and oil
• Ten-year warranty against rust-through on powder-coated compressed air reservoir
• Includes high quality composite safety coupling and high quality CONDOR pressure switch
• Large ergonomic handle
• Stable steering chassis with parking brake in combination with large, puncture-proof PU wheels
• Made in Europe

Manufacturer
Aircraft Kompressorenbau und Maschinenhandel GmbH
Gewerbestraße Ost 6, 4921 Hohenzell, Austria
info@aircraft.at

• Compressed air tank according to AD 2000 / without fitting set / 11 and 16 bar
• Hot dip galvanized inside and outside
• Constructed in accordance with EC Directive 87/404 / EEC or PED 97/23 / EC -AD 2000, Module: H / H 1
• Operating conditions according to AD 2000 - S1 (10/2000) = arrivals and departures and 20% pressure fluctuation range
• ISO 9001:2015 certified manufacturer

Manufacturer
Maschinen- und Behälterbau GmbH
Betzdorfer Straße 170, 57567 Daaden, Germany
www.mabe.de

Manufacturer
Aircraft Kompressorenbau und Maschinenhandel GmbH
Gewerbestraße Ost 6, 4921 Hohenzell, Austria
info@aircraft.at

• Absorbed oils are reliably bound in hermetically sealed cartridges - no contact with contaminants
• Easy adjustment to changing compressed air and condensate requirements
• Condensate is actively pressed through the pre-filter and main filter with light blasts of compressed air
• Permanent function monitoring
• Fail-safe mode in the event of a power failure and loss of compressed air: QWIK-PURE continues to work like conventional gravity separators

QWIK-PURE series

• Absorbed oils are reliably bound in hermetically sealed cartridges - no contact with contaminants
• Simple, clean and ergonomic cartridge replacement
• Simple adjustments to changing compressed air and condensate requirements
• Sizing according to service interval or compressor capacity

From QWIK-PURE 15

• Condensate is actively pressed through the pre-filter and main filter with light blasts of compressed air
• Permanent function monitoring
• Integrated FRC control unit: reliable display of the remaining capacity of the cartridges and automatic monitoring of when condensate needs to be pushed through with light blasts of compressed air
• Integrated monitoring optimally utilizes the cartridges
• Remote monitoring possible thanks to network capability
• No overflowing of the system thanks to active operating principle with automatic drainage
• Fail-safe mode in the event of power failure and loss of compressed air: independent initiation of measures and triggering of alarms in the event of problems. For safe operation, QWIK-PURE then continues to work like conventional gravity separators.

Manufacturer
BEKO Technologies GmbH
Im Taubental 7, 41468 Neuss, Germany
www.beko.de

• Space-saving single compressor with ribbed belt drive
• Start-stop operation via pressure switch, thereby saving energy compared to idling control
• Especially suitable for companies that have a continuous air requirement, but want a compact unit with a reduced noise level and low operating costs
• Standard supersonic insulation allows installation in sensitive rooms
• Intensive cooling warrantys operational safety and good air quality
• Standard with star-delta connection from motor power 4 kW
• Ideal also suitable for supplementing existing systems, eg for covering the compressed air base load
• Standard with thermal motor protection, oil temperature monitoring (max 110 °C) and operating hours counter, ensuring high operational safety
• Service-friendly due to optimal accessibility and easy disassembly and assembly of all important components
• Fifteen-year rust-through warranty on inside and outside hot-dip galvanized compressed air tank
• When operating the screw compressor without a container Using an overflow valve is recommended - available as an accessory

Manufacturer
Aircraft Kompressorenbau und Maschinenhandel GmbH
Gewerbestraße Ost 6, 4921 Hohenzell, Austria
info@aircraft.at

• Space-saving single compressor with ribbed belt drive
• With control ETM II including direction of rotation control
• Especially suitable for companies that have a continuous air requirement, but want a compact unit with a reduced noise level and low operating costs
• Standard supersonic insulation allows installation in sensitive rooms
• Intensive cooling warrantys operational safety and good air quality
• Standard with star-delta connection
• Ideal also suitable for supplementing existing systems, eg for covering the compressed air base load
• Standard with thermal motor protection, oil temperature monitoring (max 110 °C) and operating hours counter, ensuring high operational safety
• Service-friendly due to optimal accessibility and easy disassembly and assembly of all important components
• Fifteen-year rust-through warranty on inside and outside hot-dip galvanized compressed air tank

Manufacturer
Aircraft Kompressorenbau und Maschinenhandel GmbH
Gewerbestraße Ost 6, 4921 Hohenzell, Austria
info@aircraft.at

Manufacturer
Aircraft Kompressorenbau und Maschinenhandel GmbH
Gewerbestraße Ost 6, 4921 Hohenzell, Austria
info@aircraft.at

• Innovative LOGIN control with 4.3" touch screen for easy operation and full control of all functions.
• Energy-efficient IE4 motor
• Rotation direction control for the motor, prevents damage during start-up or after a change of stand location
• High cooling effect and low noise level due to thermostatically controlled radial fan
• Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled radial fan, optimum cooling air flow and generously dimensioned heat exchangers
• Aftercooler reduces the effort for drying and filtration of the generated compressed air
• Star-delta switching as standard
• Easy to service: simple removal and installation of all components requiring maintenance

Manufacturer
Aircraft Kompressorenbau und Maschinenhandel GmbH
Gewerbestraße Ost 6, 4921 Hohenzell, Austria
info@aircraft.at

• EasyTRONIC MICRO II electronic control with pressure sensor operation as standard, thus preventing motor overload, reducing wear and extending service life
• With star-delta switch
• High cooling effect and lower noise level due to thermostatically controlled radial fan
• Operating hours counter records load and overrun times, thus ensuring compliance with maintenance intervals - Indication of maintenance requirement via automatic message
• Rotation direction control for the motor avoids possible damage during commissioning or after a change of location
• Screw compressor with wear-resistant Poly V ribbed belt drive and carriage tensioning system
• Easy maintenance due to easily accessible elements
• Optimum operating temperatures due to thermostatically controlled fan, optimum cooling air flow and generously dimensioned heat exchanger, thus longer service life, lower fluctuations in oil temperature than with thermostat control
• Aftercooler as standard, thus less effort for drying and filtration of the generated compressed air
• Small external dimensions, thus easy transport and installation

Manufacturer
Aircraft Kompressorenbau und Maschinenhandel GmbH
Gewerbestraße Ost 6, 4921 Hohenzell, Austria
info@aircraft.at

Manufacturer
Aircraft Kompressorenbau und Maschinenhandel GmbH
Gewerbestraße Ost 6, 4921 Hohenzell, Austria
info@aircraft.at

Manufacturer
Reliance Worldwide Distribution (Europe) Limited
Ludwig-Erhard-Allee 30, 33719 Bielefeld, Germany
www.johnguest.com

• Hot-dip galvanised inside and outside with fifteen-year warranty against rusting through
• Built according to EC Directive 87/404/EEC or DGRL 97/23/EC -AD 2000, module: H / H 1

Manufacturer
Aircraft Kompressorenbau und Maschinenhandel GmbH
Gewerbestraße Ost 6, 4921 Hohenzell, Austria
info@aircraft.at

Manufacturer
Aircraft Kompressorenbau und Maschinenhandel GmbH
Gewerbestraße Ost 6, 4921 Hohenzell, Austria
info@aircraft.at