NEW PRODUCTS

Sort by

Display per page

S1 SR work boots, composite toecap, contoured heel, size 39

03-8217939

S1 SR work boots, composite toecap, contoured heel, size 39, 82-179-39 by NEO TOOLS is a model with rip-stop knitted upper, mesh knitted lining, EVA/GUMA sole and HI-POLY foam insole. The shoe is made in the S1 FO SR category, where SR stands for slip resistance on ceramic ground coated with sodium lauryl sulphate solution (SLS) and FO stands for the sole's resistance to petrol and oils. The composite insole used and the plastic reinforcement in the front of the footwear provide additional protection. The profiled heel counter adjusts better to the shape of the heel and makes the NEO TOOLS shoe easier to put on. The model is a shoe without metal elements and is CE certified.

67.29€

On request

Õlarihm GP001G, DGP180

43-166094-6

3.43€ 4.40€

On request

Pipe repair kit 7mm

03-02015

The 7 mm pipe repair set 02-015 by NEO TOOLS is intended for repairing PP-R plastic pipes. It contains 3 repair rods and a set of heating sockets with a fixing screw (3+1). The 7 mm diameter rods are made of PPR plastic and the sockets are made of light aluminium. The set enables a drilled PP-R pipe to be repaired quickly and permanently without having to replace the pipe. The repair is simple and can be carried out on site. The product is recommended for the repair of PP-R pipes in cold and hot water and central heating installations. It works well for post-drilled holes with a diameter of less than 7 mm. Effective and permanent sealing of the pipe is possible provided that only one pipe wall is damaged and the repair area is clean and dry. This compact repair kit from the NEO TOOLS brand stands out for its ease of use. It is designed for installers and repairers.

17.10€

On request

S1 SR work boots, composite toecap, contoured heel, size 40

03-8217940

S1 SR work boots, composite toecap, contoured heel, size 40, 82-179-40 by NEO TOOLS is a model with a rip-stop knitted upper, mesh knitted lining, EVA/GUMA sole and HI-POLY foam insole. The shoe is made in the S1 FO SR category, where SR stands for slip resistance on ceramic ground coated with sodium lauryl sulphate solution (SLS) and FO stands for the sole's resistance to petrol and oils. The composite insole used and the plastic reinforcement in the front of the footwear provide additional protection. The profiled heel counter adjusts better to the shape of the heel and makes the NEO TOOLS shoe easier to put on. The model is a shoe without metal elements and is CE certified.

67.29€

On request

S1 SR work boots, composite toecap, contoured heel, size 42

03-8217942

The S1 SR work boots, composite toecap, contoured heel, size 42, 82-179-42 by NEO TOOLS is a model with a rip-stop knitted upper, a knitted mesh lining, an EVA/GUMA sole and a HI-POLY foam insole. The shoe is made in the S1 FO SR category, where SR stands for slip resistance on ceramic ground coated with sodium lauryl sulphate solution (SLS) and FO stands for the sole's resistance to petrol and oils. The composite insole used and the plastic reinforcement in the front of the footwear provide additional protection. The profiled heel counter adjusts better to the shape of the heel and makes the NEO TOOLS shoe easier to put on. The model is a shoe without metal elements and is CE certified.

67.29€

On request

S1 SR work boots, composite toecap, contoured heel, size 47

03-8217947

S1 SR work boots, composite toecap, contoured heel, size 47, 82-179-47 by NEO TOOLS is a model with rip-stop knitted upper, mesh knitted lining, EVA/GUMA sole and HI-POLY foam insole. The shoe is made in the S1 FO SR category, where SR stands for slip resistance on ceramic ground coated with sodium lauryl sulphate solution (SLS) and FO stands for the sole's resistance to petrol and oils. The composite insole used and the plastic reinforcement in the front of the footwear provide additional protection. The profiled heel counter adjusts better to the shape of the heel and makes the NEO TOOLS shoe easier to put on. The model is a shoe without metal elements and is CE certified.

67.29€

On request

Clamping disc with Velcro 150 mm x 3 mm, M14 thread

02-58T459

Velcro fastening disc 150 mm x 3 mm, M14 thread, 58T459 by GRAPHITE is a Velcro fastening disc with a diameter of 150 mm and a thickness of 3 mm. Fitted with an M14 screw chuck, it allows mounting on angle grinders. Designed to work with sandpaper discs, in tasks with metal and wooden surfaces. The backing plate facilitates sanding of hard-to-reach areas. The maximum speed of this GRAPHITE accessory is 8,500 rpm.

3.91€

On request

Forked hole saw 65 mm with HEX adapter and pilot drill bit

03-55324

The 65 mm forked hole saw with HEX adapter and pilot drill 55-324 by NEO TOOLS is a set of forked hole saw offered with HEX adapter and pilot drill, recommended for impact and concrete tasks. The hole saw features a diameter of 65mm, a height of 72mm and a drilling depth of 50mm. It has an M22 thread and has been fitted with TCT blades. The drill bit, on the other hand, has a length of 110 mm and a diameter of 8 mm. The adapter has a total length of 110 mm. This is an indispensable set of forked hole saw, with HEX adapter and NEO TOOLS pilot drill bit for professionals and DIY enthusiasts.

14.50€

On request

Velcro-backed sanding discs 150 mm, P40, 5 pcs, with 8 holes

03-55945

Velcro-backed sanding discs 150 mm, P40, 5 pcs, with 8 holes 55-945 by NEO TOOLS with a diameter of 150 mm and gradation P40. The pack contains five discs. The accessories have 8 practical holes with a diameter of 10 mm, with a diameter between the centres of the holes of 65 mm. Velcro discs from NEO TOOLS are made of type E paper. They are characterised by a half-open grain and grain made of electro-corundum. They will be suitable both for professional use and during DIY tasks, in metal, plastic and wood.

2.19€

On request

Drill set for mini grinder, 10 pcs.

02-56T656

The 56T656 mini grinder drill bit set, 10 pieces by GRAPHITE includes 10 drill bits with diameters of 0.6; 0.7; 0.8; 0.9; 1; 1.2; 1.5; 1.8; 2 and 2.3 mm, designed for drilling precision holes in various materials. The drills are made from HSS high speed steel, have a shank diameter of 2.35mm and an overall length of 45mm. The set is designed to be used with mini grinders and will work well for drilling in wood, metal and plastics. The maximum recommended speed is 3,000 rpm, allowing for precise and controlled work.

13.21€

On request

HSS-Co 5.0 mm metal drill bits, 10 pcs.

03-5703210

HSS-Co 5.0 mm metal drill bit , 10 pcs. 57-032-10 by NEO TOOLS is a drill bit deeply ground according to DIN 338 and made of M35 steel with 5% cobalt addition. It uses an apex angle of 135° and type C shear correction. It has a cylindrical handle. The length of the working part is 52 mm and its overall length is 86 mm. The maximum speeds are: INOX 725-800 rpm, general metals 1450-1600 rpm. The purpose of this NEO TOOLS brand drill bit is to drill in demanding materials such as stainless, acid-resistant and heat-resistant steel.

18.20€

On request

HSS-Co 9.0 mm metal drill bits, 5 pcs.

03-570505

HSS-Co 9.0 mm metal drill bits, 5 pcs. 57-050-5 by NEO TOOLS are deep ground drills according to DIN 338 and made of M35 steel with 5% cobalt addition. They use a tip angle of 135° and type C shear correction. They have a cylindrical handle. The length of the working part is 81 mm and their overall length is 125 mm. The maximum speeds are: INOX 400-450 rpm, general metals 800-900 rpm. The purpose of this set by NEO TOOLS is to drill in demanding materials such as stainless, acid-resistant and heat-resistant steel.

33.29€

On request

Velcro disc 125 mm x 3 mm, M14 thread

02-58T458

The Velcro fastening disc 125 mm x 3 mm, M14 thread, 58T458 by GRAPHITE is a Velcro fastening disc with a diameter of 125 mm and a thickness of 3 mm. Fitted with an M14 screw chuck, it allows mounting on angle grinders. Designed to work with sandpaper discs, in tasks with metal and wooden surfaces. The backing plate facilitates sanding of hard-to-reach areas. The maximum speed of this GRAPHITE accessory is 12,000 rpm.

2.90€

On request

Blade arbor, M14 thread

02-58T463

Wheel arbor, M14 thread, 58T463 by GRAPHITE is designed for clamping a clamping wheel with M14 thread. The component has a shank with a diameter of 8 mm, which allows the mounting disc to be worked with a drill or drill/driver with the same shank. This solution allows the use of a mounting disc with an M14 thread in drilling tools.

1.00€

On request

Clamping disc with Velcro 150 mm x 8 mm, M14 thread

02-58T457

GRAPHITE's 150 mm x 8 mm, M14 thread, 58T457 Velcro fastening disc has a diameter of 150 mm, a thickness of 8 mm and an M14 screw chuck. The maximum speed is 8,500 rpm. It is designed for use with angle grinders. It allows sanding of various surfaces using abrasive papers with a diameter of 150 mm. The velcro is backed with a flexible foam backing, which allows the sanding discs to be changed quickly.

4.50€

On request

SDS Plus reinforced concrete drill bit 12 x 310 mm, quatro

03-54119

The SDS Plus 12 x 310 mm, quatro 54-119 reinforced concrete drill bit by NEO TOOLS is an accessory characterised by a diameter of 12 mm and an overall length of 310 mm and a working length of 240 mm. Equipped with an SDS Plus handle, double helix and QUATRO fork (four cross-set forks), it is ideal for working in reinforced concrete. The cross-cut bit is made of fine-grain carbide. This robust tool from NEO TOOLS is recommended for intensive use by professionals.

5.90€

On request

Velcro sanding discs 150 mm, P80, 5 pcs, with 8 holes

03-55947

Velcro-backed sanding discs 150 mm, P80, 5 pcs, with 8 holes 55-947 by NEO TOOLS with a diameter of 150 mm and gradation P80. The pack contains five discs. The accessories have 8 practical holes with a diameter of 10 mm, with a diameter between the centres of the holes of 65 mm. Velcro discs from NEO TOOLS are made of type E paper. They are characterised by a half-open grain and grain made of electro-corundum. They will be suitable both for professional use and during DIY tasks, in metal, plastic and wood.

2.19€

On request

Accessory set for mini grinder, 100 pcs.

02-56T663

The mini grinder accessory set, 100 pieces 56T663 by GRAPHITE contains 100 pieces designed to work in metal, wood, plastics, ceramics and glass. The accessories have a 3mm diameter shank, allowing them to be used on mini grinders. The set includes 5 diamond cutters, 10 shank sanding stones (2 blue - 13 and 7 mm, 3 orange - 16, 10 and 10 mm, 5 pink - 10, 10, 10, 6.3 and 6 mm), 3 wire brushes (disc, butt, brush) and 3 nylon brushes in the same variations. The set also includes 48 corundum cutting discs (10 x 32 mm, 38 x 24 mm), a 22 mm diamond disc and a 22 mm wood cutting disc. In addition, the set includes 10 felt discs (5 x 25 mm and 5 x 12 mm), polishing paste, 11 sanding bands per mandrel (5 x 16 mm and 6 x 9.5 mm), 3 mandrels for cutting discs, 1 mandrel for felt discs, 2 mandrels for sanding bands and a sanding block measuring 9.5 x 9.5 x 24 mm.

23.40€

On request

Endless belts 75 x 457 mm, K120, 3 pcs.

03-55791

Endless belts 75 x 457 mm, P120, 3 pieces 55-791 by NEO TOOLS is a set of 3 abrasive belts designed for metal, wood and plastic processing. They use electro-corundum as the grain and the backing is tough X-type canvas, suitable for machine sanding. The semi-open grain reduces clogging and promotes uniform stock removal. The 75 × 457 mm dimensions ensure compatibility with popular belt sanders.

2.60€

On request

Cordless Grease Gun XGT® 40V • 690 bar • 350 ml • bare tool

40-GP001GZ

The Makita GP001GZ is a professional‑grade 40Vmax XGT® cordless grease gun designed for high‑pressure lubrication of heavy machinery, agricultural equipment and industrial systems. It delivers up to 690 bar (69 MPa) of maximum pressure with a grease output of up to 350 ml/min, ensuring fast and reliable greasing even under high resistance.

The brushless motor with constant speed control provides a steady grease flow. A preset counter allows accurate fixed‑quantity discharge, helping prevent over‑lubrication. Features such as air lock detection, twin LED job lights, and XPT (Extreme Protection Technology) ensure safe and reliable operation in harsh working environments.

This is a bare tool (Z version) – battery and charger are not included.

Key Features:

Battery platform: XGT® 40Vmax
Maximum pressure: 690 bar (69 MPa)
Grease output: up to 350 ml/min
Capacity: 350 ml
Brushless motor (BL)
Constant speed control
Preset counter for fixed‑quantity discharge
Air lock detection
Twin LED job lights
XPT dust and water resistance
Bare tool – battery and charger not included

352.42€ 469.90€

In stock 2