NEW PRODUCTS

The NEO impact bits (ref. 09-584) are a set of 5 professional T20 impact bits with a length of 50 mm. They are designed for 1/4 ”screwdrivers. They have a system that protects them against slipping of the tip from the screw. The bits are made of S2 steel. They enable a high tightening torque of 21.8 Nm. The torque absorption system protects the tips against quick wear and significantly extends their service life.

TOPEX masking tape, length 35 m, yellow. Used to protect edges during painting. TOPEX brand is oriented towards DIY enthusiasts.

Mixing paddle 580 x 120 mm, quick lock, designed for mixing thick and thin gypsum mass, adhesive mortars or paints.

The SDS+ 900 W, 4J 58G860 impact hammer by GRAPHITE is a specialist 900 W SDS+ 3-function tool that is indispensable for installation and demolition work. It has drilling, impact and a shoring function, needed when chipping plastered or tiled surfaces. The maximum percussion energy is 4 J, giving the unit an advantage when tackling concrete, stone or brick. The maximum percussion rate at nominal speed is 3850 min-¹, and the maximum drilling speed is 980 min-¹. The two-finger switch contributes to its comfort. The flexible, robust power cable is in a 4 m rubber sheath and is dedicated to both professional and industrial indoor or outdoor use. The hammer is offered with: drill bit, pick, mounting key, swivel auxiliary handle, drilling depth stop with tool-free length adjustment, lubricant reservoir and practical carrying case. CE certification ensures compliance with European standards.

The GRAPHITE impact bits (ref. 56H527) type TX27, with a total length of 50 mm, are heavy duty bits designed for heavier work with high torques using screwdrivers or impact drivers. Made of high-quality S2 steel, which is characterized by increased flexibility and resistance to mechanical damage. The torsion zone, rotating under the influence of high torque, reduces the transmission of force, which makes the bit more resistant to breakage, and its service life is extended several times. The working tip of the tip guarantees a perfect fit. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

The NEO impact bits (ref. 09-575) are a set of 5 professional PH1 impact bits with a length of 50 mm. They are designed for 1/4 ”screwdrivers. They have a system that protects them against slipping of the tip from the screw. The bits are made of S2 steel. They enable a high tightening torque of 21.8 Nm. The torque absorption system protects the tips against quick wear and significantly extends their service life.

The GRAPHITE impact bits (ref. 56H536) type PZ4, with a total length of 25 mm, are heavy duty bits designed for heavier work with high torques using screwdrivers or impact drivers. Made of high-quality S2 steel, which is characterized by increased flexibility and resistance to mechanical damage. The torsion zone, rotating under the influence of high torque, reduces the transmission of force, which makes the bit more resistant to breakage, and its service life is extended several times. The working tip of the tip guarantees a perfect fit. Convenient plastic box allows you to easily store the tips. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

TOPEX axe is a versatile tool designed mainly for works in garden and forest. Elastic axe head is made of high quality tool steel, selectively hardened and resistant to cracking caused by impact. Strong blade with great resistance to blunting. Handle is made of fibreglass, this material is very resistant to temperature changes, moisture and mechanical damages, which improves axe strength. Ergonomic handle is coated with anti slip material and provides comfort and safety when working. TÜV, GS certificates and manufacturing process compliant with DIN 5131 guarantee reliability. TOPEX brand is oriented towards DIY enthusiasts.

TOPEX axe is a versatile tool designed mainly for works in garden and forest. Elastic axe head is made of high quality tool steel, selectively hardened and resistant to cracking caused by impact. Strong blade with great resistance to blunting. Handle is made of fibreglass, this material is very resistant to temperature changes, moisture and mechanical damages, which improves axe strength. Ergonomic handle is coated with anti slip material and provides comfort and safety when working. TÜV, GS certificates and manufacturing process compliant with DIN 5131 guarantee reliability. TOPEX brand is oriented towards DIY enthusiasts.

TOPEX carpenter chisel is designed for wood processing. Product is made of high quality tool steel. It features ergonomic plastic handle that fits well in hand. Perfect solution for DIY enthusiasts. TOPEX brand is oriented towards DIY enthusiasts.

The GRAPHITE impact bits (ref. 56H516) type TX30, with a total length of 25 mm, are heavy duty bits designed for heavier work with high torques using screwdrivers or impact drivers. Made of high-quality S2 steel, which is characterized by increased flexibility and resistance to mechanical damage. The torsion zone, rotating under the influence of high torque, reduces the transmission of force, which makes the bit more resistant to breakage, and its service life is extended several times. The working tip of the tip guarantees a perfect fit. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

Screwdriver bit PH3 x 6.35 x 300 mm, 1/4" 56H580 by GRAPHITE is a screwdriver bit type PH3 with size 6.35 and length 300 mm. Mounted on a ¼" thread. It features high resistance to deformation and is recommended for high frequency work. The element is made of S2 steel. The tip is recommended for Phillips screws, it will prove useful in every professional's and DIY workshop.

The TOPEX 200 mm rotary locksmith vise 07A220 is offered with a 100 x 100 mm anvil and a 360 degree rotating head. The base of the vise is made of durable ductile cast iron resistant to damage, the body is made of grey cast iron and the jaws are made of hardened steel. The tool features a damage-resistant design. The jaw iron retains its durability even after heat treatment, and the T-shaped screw bar, further contributes to the strength of the fasteners. The width of the jaws is 200 mm, their opening is 155 mm and the throat depth of the jaws is 75 mm. The rotary ironworker's vice is distinguished by its strong clamping and fixing. It is recommended for all kinds of workshop and hydraulic work.

TOPEX abrasive cloths are designed for manual processing of wood, metal and plastics. Made of high quality cloths joined with resin. Alumina grit is characterized by high hardness and allows for multiple use, guarantees efficient operation. TOPEX brand is oriented towards DIY enthusiasts.

GRAPHITE screwdriver bits are made of durable S2 steel that ensures long service life. Convenient, plastic case allows for easy storage of bits inside a tool box. 20 pcs of one size bits are used for tasks that require doing large quantities of screws in series (e.g. fixing plasterboards).

The GRAPHITE impact bits (ref. 56H512) type TX15, with a total length of 25 mm, are heavy duty bits designed for heavier work with high torques using screwdrivers or impact drivers. Made of high-quality S2 steel, which is characterized by increased flexibility and resistance to mechanical damage. The torsion zone, rotating under the influence of high torque, reduces the transmission of force, which makes the bit more resistant to breakage, and its service life is extended several times. The working tip of the tip guarantees a perfect fit. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

The GRAPHITE impact bits (ref. 56H529) type TX40, with a total length of 50 mm, are heavy duty bits designed for heavier work with high torques using screwdrivers or impact drivers. Made of high-quality S2 steel, which is characterized by increased flexibility and resistance to mechanical damage. The torsion zone, rotating under the influence of high torque, reduces the transmission of force, which makes the bit more resistant to breakage, and its service life is extended several times. The working tip of the tip guarantees a perfect fit. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

TOPEX wrecking bar is a versatile tool for use in renovation and construction works, e.g. to lever up weights or crushing. It is made of high quality tool steel resistant to deformations. The tool is profiled with hexagonal cross section and greater tip angled at 90°. TOPEX brand is oriented towards DIY enthusiasts.

The GRAPHITE impact bits (ref. 56H524) type TX15, with a total length of 50 mm, are heavy duty bits designed for heavier work with high torques using screwdrivers or impact drivers. Made of high-quality S2 steel, which is characterized by increased flexibility and resistance to mechanical damage. The torsion zone, rotating under the influence of high torque, reduces the transmission of force, which makes the bit more resistant to breakage, and its service life is extended several times. The working tip of the tip guarantees a perfect fit. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

Ceiling Brush 175 x 80 mm