Osakeste filter

Drip collars allow for direct watering of plants and are part of the innovative "Kärcher Rain System™".

They can be attached at any point on the Kärcher Rain System™ hose. Installation is fast, easy and does not require tools.

The drip collar is opened, the watering hose is pricked with the help of the integrated needle at the desired point and the collar is fixed by closing. Finished.

With the rotatable head, the water volume can be adjusted from 0 - 10 l/h and this means that unnecessary water consumption can be avoided.

The highly efficient "Kärcher Rain System™" watering system works with up to 4 bar pressure, features a 1/2" hose with drip and spray collars and combines the advantages of micro-dripping and conventional watering. The "Kärcher Rain System™" can be individually adapted to almost any garden and works perfectly with the SensoTimer for demand-based watering control.

Spray collars are part of the Kärcher Rain System™. They can be attached anywhere on the Kärcher Rain System™ hose. Installation is fast, easy and does not require tools. The integrated needle on the opened spray collar is simply stuck into the hose. By closing, the spray collar is securely fixed to the hose.

The alignment of the spray angle can be adjusted horizontally and vertically thanks to the rotatable head.

On the nozzle, the water volume can be adjusted from 0 - 55 l/h according to requirements and in order to conserve resources.

The highly efficient Kärcher Rain System™ watering system works with 4 bar pressure, features a 1/2" hose with drip and spray collars and combines the advantages of micro-dripping and conventional watering. The "Kärcher Rain System™" can be adjusted to almost any garden and works perfectly with the SensoTimer for need-based watering control.

Simply connect the K 7 Smart Control Flex pressure washer to the Kärcher Home & Garden app on your smartphone via Bluetooth – cleaning becomes even easier and more efficient.

This is because the application consultant in the app gives practical tips and tricks for many cleaning situations and cleaning tasks. The app also offers many other useful functions such as assembly instructions, maintenance and care instructions, as well as the Kärcher Service portal.

The device has a boost mode for extra power, meaning even stubborn dirt is not an issue. The pressure levels can be set on the G 180 Q Smart Control trigger gun with LCD display or transferred to the trigger gun with the help of the application consultant via the app – so that nothing can go wrong when cleaning.

Other equipment details include the 3-in-1 Multi Jet spray lance for a wide range of applications without changing spray lance, the PremiumFlex high-pressure hose, the Plug 'n' Clean detergent system for effortless changing of the detergent, the high-quality aluminium telescopic handle for simple transportation and storage, as well as the parking position for readily accessible accessories.

The pressure reducer with filter is part of the Kärcher Rain System™. It reduces the input pressure from max.

12 bar to an output pressure of 4 bar and is installed between the feeder hose and Kärcher Rain System™.

The particle filter protects the system from dirt particles. The filter inlay can be easily removed and cleaned. There is a tap connector on the input side, which is compatible with all known click systems.

The output side is the connection for the Kärcher Rain System™ hose or the soaker hose.

The hoses are attached directly and fixed using a union nut, without any need for tools.

The efficient Kärcher Rain System™ combines the advantages of micro-dripping and conventional watering systems.

It works with up to 4 bar pressure, can be individually adapted to almost any type of garden and works perfectly with the SensoTimer for needs-based watering control.

The SensoTimer ST 6 eco!ogic waters in a moisture-controlled manner and on demand.

The sensor included in the scope of supply measures the soil moisture value and sends it by radio to the SensoTimer.

The desired moisture value can be set in 5 stages.

If the selected value is not reached, the watering automatically starts at the next set time.

The detachable control panel and 5 operating buttons make the programming very simple.

Up to two watering times can be set per day (max. watering duration: 90 minutes).

Thanks to the eco!ogic function, the watering can also be delayed by 1 to 7 days.

Manual watering is possible at any time.

At the touch of a button the watering programming can be suspended for 24 hours.

The SensoTimer ST 6 eco!ogic is compatible with all known hook-and-loop systems.

Tap adapter and prefilter are included in the scope of supply, the required 9 V battery is not included.

Sealing collars are part of the "Kärcher Rain System™".

They can be quickly attached anywhere on the Kärcher Rain System™ hose and are used to reliably seal collar holes that are no longer required. The rubberised surface and the integrated pin on the inside make this possible.

Installation is fast, easy and does not require tools.

The pin is stuck into the hole to be sealed and the collar is closed.

This securely seals the hose, which can then continue to be used without unnecessary waste of water.

The highly efficient Kärcher Rain System™ watering system works with 4 bar pressure, features a 1/2" hose with drip and spray collars and combines the advantages of micro-dripping and conventional watering. The "Kärcher Rain System™" can be individually adapted to almost any garden and works perfectly with the SensoTimer for need-based watering control.

The 10 m long soaker hose is part of the Kärcher Rain System™.

The water drips out of the hose evenly over the entire length, landing precisely where it is needed, and thus ensures extremely efficient watering of hedges and bushes.

The hose can be shortened to suit requirements and extended with the aid of I-pieces or branched with T-pieces (max. hose length: 50 m).

A T-piece is especially recommended for connection to the Kärcher Rain System™.

Thanks to the laterally adjustable tee, the required water quantity for the soaker hose can be optimally adjusted.

The two-ply hose is free of phthalates, cadmium, barium and lead and is thus harmless to health.

Ideally, the hose is operated with up to 2 bar. Installing the hose is very easy and does not require the use of tools.

The Kärcher Rain System™ combines the advantages of micro-dripping and conventional watering, works with up to 4 bar pressure and can be individually adapted to almost any type of garden.

The Kärcher Rain System™ hose is the main component of the Kärcher Rain System™.

It distributes water evenly within the system.

The drip, sealing and spray collars can be optimally fixed to the hose.

The hose can be shortened as required and extended with the help of I-pieces or branched with T-pieces.

For example, the soaker hose can be connected to the end of the hose. The hose is 10 m in length.

The pressure-resistant, braided reinforcement is free of phthalates, cadmium, barium and lead and is thus harmless to health.

A weather-resistant, UV-proof outer layer protects the material, and an opaque interlayer prevents algae formation in the hose.

The hose is very easy to install, without the need for any tools. The Kärcher Rain System™ combines the advantages of micro-dripping and conventional watering, works with up to 4 bar pressure and offers a 1/2" hose with drip and spray collars.

The Kärcher Rain System™ can be individually adapted to almost any type of garden and works perfectly together with the SensoTimer™ for needs-based watering control.

The ground spike is part of the Kärcher Rain System™.

It reliably fixes the Kärcher Rain System™ hose and the soaker hose at the desired point and creates the necessary distance to the ground.

The 17 cm long ground spike has a marking tool for conveniently defining the optimal insertion depth.

The rubber ring on the attachment point ensures secure fixing of the hoses.

The Kärcher Rain System™ combines the advantages of micro-dripping and conventional watering.

The highly efficient Kärcher Rain System™ watering system works with up to 4 bar pressure and features a 1/2" hose with drip and spray collars.

The Kärcher Rain System™ can be individually adapted to almost any garden and works perfectly with the SensoTimer for need-based watering control.

The Makita E‑15855 is an 8‑piece multi‑material drill bit set featuring tungsten carbide‑tipped (TCT) cutting edges.

The set is designed for drilling a wide range of materials, including wood, plastic, metal, brick, ceramic tiles and aluminium, using a single versatile kit. 

The drill bits have a cylindrical shank and are supplied in a handy plastic storage case for easy organisation and transport.

The TCT tip ensures excellent durability and long service life.

The end piece is part of the Kärcher Rain System™.

It seals the Kärcher Rain System™ hose or the soaker hose, meaning the system can be individually and flexibly adapted to the respective garden situation.

The laid or shortened hoses can be connected at any point. Installing the hose is child's play and can be done without the use of tools.

The hose is simply pushed onto the end piece and fixed with the help of the union nut.

The Kärcher Rain System™ combines the advantages of micro-dripping and conventional watering.

The system works with up to 4 bar pressure and features a 1/2" hose with drip and spray collars.

The Kärcher Rain System™ can be individually adapted to almost any garden and works perfectly with the SensoTimer for economical and needs-based watering control.

31‑piece screwdriver bit set is a compact and versatile solution for everyday fastening and installation tasks. The set includes a locking magnetic bit holder and the most commonly used bit types, making it suitable for both professional use and home maintenance.

All bits feature a 1/4″ hex shank (25 mm length) and are compatible with most cordless drills, impact drivers, and manual bit holders.

Set includes:

• Phillips bits (6 pcs): PH1, PH2 (4×), PH3
• Pozidriv bits (4 pcs): PZ1, PZ2, PZ3, PZ4
• Robertson bit (1 pc): S1
• Torx bits (17 pcs):
• TX8 (2×), TX10 (2×), TX15 (2×), TX20 (4×), TX25 (4×), TX30 (2×), TX40
• T‑tap bit (1 pc): TT25
• Hex bit (1 pc): HEX4
• Magnetic bit holder (1 pc): 1/4″

Key benefits:

Comprehensive selection of commonly used bits

Locking magnetic bit holder included

Suitable for professional and DIY applications

Standard 1/4″ hex shank for wide compatibility