OUTLET

• Compact diagonal cutter for very tough, continuous use
• High cutting performance with minimum effort thanks to optimized cutting edge angle and leverage ratio
• Precision cutting edges, induction-hardened (approx. 64 HRC), suitable for all wire types including piano wire
• Material: Chrome vanadium heavy-duty steel, forged, multi-stage oil-hardened
• Length: 180 mm
• Weight: approx. 241 g
• Standard: DIN ISO 5749
• Cutting capacities:

    Medium-hard wire: Ø 3.8 mm

    Hard wire: Ø 2.7 mm

    Piano wire: Ø 2.2 mm

• Handles: plastic-coated, ergonomic design
• Advantages: 20% less effort compared to standard diagonal cutters, ideal for constant use

• Diagonal cutter for very tough, continuous use
• High cutting performance with minimum effort thanks to optimized cutting edge angle and leverage ratio
• Precision cutting edges, induction-hardened (approx. 64 HRC), suitable for all wire types including piano wire
• Material: Chrome vanadium heavy-duty steel, forged, multi-stage oil-hardened
• Length: 200 mm
• Weight: approx. 263 g
• Standard: DIN ISO 5749
• Cutting capacities:

    Medium-hard wire: Ø 4.2 mm

    Hard wire: Ø 3.0 mm

    Piano wire: Ø 2.5 mm

• Handles: plastic-coated, ergonomic design
• Advantages: 20% less effort compared to standard diagonal cutters, ideal for constant use

• Large diagonal cutter for very tough, continuous use
• High cutting performance with minimum effort thanks to optimized cutting edge angle and leverage ratio
• Precision cutting edges, induction-hardened (approx. 64 HRC), suitable for all wire types including piano wire
• Material: Chrome vanadium heavy-duty steel, forged, multi-stage oil-hardened
• Length: 250 mm
• Weight: approx. 391 g
• Standard: DIN ISO 5749
• Cutting capacities:

    Medium-hard wire: Ø 4.6 mm

    Hard wire: Ø 3.5 mm

    Piano wire: Ø 3.0 mm

• Handles: plastic-coated, ergonomic design
• Advantages: 20% less effort compared to standard diagonal cutters, ideal for constant use

• Large diagonal cutter for very tough, continuous use
• High cutting performance with minimum effort thanks to optimized cutting edge angle and leverage ratio
• Precision cutting edges, induction-hardened (approx. 64 HRC), suitable for all wire types including piano wire
• Material: Chrome vanadium heavy-duty steel, forged, multi-stage oil-hardened
• Length: 250 mm
• Weight: approx. 437 g
• Standard: DIN ISO 5749
• Cutting capacities:

    Medium-hard wire: Ø 4.6 mm

    Hard wire: Ø 3.5 mm

    Piano wire: Ø 3.0 mm

• Handles: multi-component grips, ergonomic design
• Advantages: 20% less effort compared to standard diagonal cutters, ideal for constant use

• Diagonal cutter for very tough, continuous use
• VDE-tested insulation up to 1000 V according to IEC 60900
• High cutting performance with minimum effort thanks to optimized cutting edge angle and leverage ratio
• Precision cutting edges, induction-hardened (approx. 64 HRC), suitable for all wire types including piano wire
• Material: Chrome vanadium heavy-duty steel, forged, multi-stage oil-hardened
• Length: 180 mm
• Weight: approx. 250 g
• Standards: DIN ISO 5749, IEC 60900
• Cutting capacities:

    Medium-hard wire: Ø 3.8 mm

    Hard wire: Ø 2.7 mm

    Piano wire: Ø 2.2 mm

• Handles: multi-component VDE insulation, ergonomic design
• Advantages: 20% less effort compared to standard diagonal cutters, ideal for electrical work

• Diagonal cutter for very tough, continuous use
• VDE-tested insulation up to 1000 V according to IEC 60900
• High cutting performance with minimum effort thanks to optimized cutting edge angle and leverage ratio
• Precision cutting edges, induction-hardened (approx. 64 HRC), suitable for all wire types including piano wire
• Material: Chrome vanadium heavy-duty steel, forged, multi-stage oil-hardened
• Length: 200 mm
• Weight: approx. 280 g
• Standards: DIN ISO 5749, IEC 60900
• Cutting capacities:

    Medium-hard wire: Ø 4.2 mm

    Hard wire: Ø 3.0 mm

    Piano wire: Ø 2.5 mm

• Handles: multi-component VDE insulation, ergonomic design
• Advantages: 20% less effort compared to standard diagonal cutters, ideal for electrical work

• Diagonal cutter for very tough, continuous use
• VDE-tested insulation up to 1000 V according to IEC 60900
• High cutting performance with minimum effort thanks to optimized cutting edge angle and leverage ratio
• Precision cutting edges, induction-hardened (approx. 64 HRC), suitable for all wire types including piano wire
• Material: Chrome vanadium heavy-duty steel, forged, multi-stage oil-hardened
• Length: 200 mm
• Weight: approx. 280 g
• Standards: DIN ISO 5749, IEC 60900
• Cutting capacities:

    Medium-hard wire: Ø 4.2 mm

    Hard wire: Ø 3.0 mm

    Piano wire: Ø 2.5 mm

• Handles: multi-component VDE insulation, ergonomic design
• Advantages: 20% less effort compared to standard diagonal cutters, ideal for electrical work

• Large diagonal cutter for very tough, continuous use
• VDE-tested insulation up to 1000 V according to IEC 60900
• High cutting performance with minimum effort thanks to optimized cutting edge angle and leverage ratio
• Precision cutting edges, induction-hardened (approx. 64 HRC), suitable for all wire types including piano wire
• Material: Chrome vanadium heavy-duty steel, forged, multi-stage oil-hardened
• Length: 250 mm
• Weight: approx. 437 g
• Standards: DIN ISO 5749, IEC 60900
• Cutting capacities:

    Medium-hard wire: Ø 4.6 mm

    Hard wire: Ø 3.5 mm

    Piano wire: Ø 3.0 mm

• Handles: multi-component VDE insulation, ergonomic design
• Advantages: 20% less effort compared to standard diagonal cutters, ideal for electrical work

• Diagonal cutter for very tough, continuous use
• VDE-tested insulation up to 1000 V according to IEC 60900
• High cutting performance with minimum effort thanks to optimized cutting edge angle and leverage ratio
• Precision cutting edges, induction-hardened (approx. 64 HRC), suitable for all wire types including piano wire
• Material: Chrome vanadium heavy-duty steel, forged, multi-stage oil-hardened
• Length: 200 mm
• Weight: approx. 280 g
• Standards: DIN ISO 5749, IEC 60900
• Cutting capacities:

    Medium-hard wire: Ø 4.2 mm

    Hard wire: Ø 3.0 mm

    Piano wire: Ø 2.5 mm

• Handles: multi-component VDE insulation, ergonomic design
• Advantages: 20% less effort compared to standard diagonal cutters, ideal for electrical work

• Large diagonal cutter for very tough, continuous use
• VDE-tested insulation up to 1000 V according to IEC 60900
• High cutting performance with minimum effort thanks to optimized cutting edge angle and leverage ratio
• Precision cutting edges, induction-hardened (approx. 64 HRC), suitable for all wire types including piano wire
• Material: Chrome vanadium heavy-duty steel, forged, multi-stage oil-hardened
• Length: 250 mm
• Weight: approx. 437 g
• Standards: DIN ISO 5749, IEC 60900
• Cutting capacities:

    Medium-hard wire: Ø 4.6 mm

    Hard wire: Ø 3.5 mm

    Piano wire: Ø 3.0 mm

• Handles: multi-component VDE insulation, ergonomic design
• Advantages: 20% less effort compared to standard diagonal cutters, ideal for electrical work

• Tool Type: Electronics Diagonal Cutter
• Length: 116 mm
• Weight: 70 g
• Material: Special tool steel, forged, oil-hardened
• Head Finish: Mirror polished
• Handles: Multi-component ergonomic grips
• Cutting Edge Hardness: Approx. 57 HRC

Cutting Capacities:

Soft wire: up to Ø 1.3 mm

Medium-hard wire: up to Ø 0.8 mm

Features:

• Precision tool for fine cutting in electronics and precision mechanics
• Pointed head without bevel – ideal for confined spaces
• Sturdy, zero-backlash box joint for durability
• Low-friction double spring for smooth and even opening
• Mirror polish with oil film for rust protection
• Not suitable for cutting hard wire

Description:

Precision pliers designed for ultra-fine cutting tasks in electronics and fine mechanics. The ESD version features handles that safely discharge electrostatic energy, protecting sensitive electronic components.

Key Features:

Cutting edges: Ground, very sharp, without bevel – ideal for flush cutting

Cutting edge hardness: Approx. 54 HRC

Material: INOX stainless steel (surgical grade)

Cutting type: Shear cut with controlled micro cutting edge misalignment for precision and durability

Joint: Stainless steel rivet for smooth operation

Handles: Multi-component ESD-safe grips

Opening spring and limiter: For ergonomic use and reduced fatigue

Precision tips: Allow cutting wires as thin as Ø 0.2 mm close to surfaces

Cutting Capacities:

Soft wire: Ø 0.2 – 1.6 mm

Medium hard wire: Ø 1.0 mm

Dimensions:

Length: 125 mm

Jaw length (B): 9 mm

Jaw thickness (D): 7.5 mm

Head width (A): 13.5 mm

Weight: 56 g

Compliance:

Standard: DIN ISO 9654

REACH: Compliant (no SVHC)

RoHS: Not applicable

• Product Type: Precision side cutters for ultra-fine cutting work
• Manufacturer Code: 78 13 125 ESD
• Length: 125 mm
• Weight: 57 g
• Material: INOX tool steel (surgical stainless steel)
• Handles: Multi-component grips, electrically dissipative (ESD protection)
• Cutting Edge Hardness: Approx. 54 HRC
• Standards: DIN ISO 9654, DIN EN 61340-5
• REACH compliant: Does not contain SVHC
• RoHS compliant: Not applicable

Features:

ESD protection: Conductive handles discharge electrostatic energy slowly and safely, protecting sensitive electronic components.

Lead catcher: Prevents uncontrolled loss of cut wire ends.

Precision cutting: Ground, very sharp cutting edges without bevel for flush cuts.

Micro cutting edge misalignment: Ensures precise shear cuts and long service life.

Tip design: Precisely shaped tips allow cutting wires close to surfaces from Ø 0.2 mm.

Smooth operation: Stainless steel rivet joint and opening spring reduce operator fatigue.

Opening limiter: Prevents overextension and improves control.

Cutting Capacities:

Soft wire: Ø 0.2 – 1.6 mm

Medium-hard wire: Ø 1.0 mm

Jaw length (B): 9 mm

Jaw thickness (D): 7.5 mm

Head width (A): 13.5 mm

• Product Type: Electronic Super Knips® ESD – precision pliers for ultra-fine cutting work
• Part No.: 78 71 125 ESD
• Length: 125 mm
• Weight: 57 g
• Material: Special tool steel, burnished
• Handles: Multi-component grips, electrically dissipative (ESD protection)
• Cutting Edge Hardness: Approx. 62 HRC
• Standards: DIN ISO 9654, DIN EN 61340-5
• REACH compliant: Does not contain SVHC
• RoHS compliant: Not applicable

Features:

• ESD protection: Conductive handles discharge electrostatic energy slowly and safely, protecting sensitive electronics.
• Lead catcher: Prevents uncontrolled loss of cut wire ends.
• Precision cutting edges: Ground without bevel for flush cuts.
• Micro cutting edge misalignment: Ensures precise shear cuts and long service life.
• Opening spring and limiter: Reduces operator fatigue and improves control.
• Joint: Stainless steel rivet for smooth movement.

Cutting Capacities:

• Soft wire: Ø 0.2 – 1.6 mm
• Medium-hard wire: Ø up to 1.2 mm
• Jaw length (B): 9 mm
• Jaw thickness (D): 7.5 mm
• Head width (A): 13.5 mm

• Ideal for tightening and loosening siphon screw connections, plastic pipe fittings, and round union nuts
• Also suitable for gentle loosening of hoses on nozzles and filter cartridges
• Fine adjustment – 25 positions for perfect adaptation to various diameters
• Working capacity: Ø 25–80 mm
• Length: 250 mm
• Weight: approx. 375 g
• Material: Chrome vanadium electric steel, forged, oil-hardened
• Finish: Black atramentized, polished head
• Handles: with non-slip plastic coating
• Standard: DIN ISO 8976
• Advantages: Robust heavy-duty design, serrated gripping jaws, ergonomic handle geometry

• Length: 330 mm
• Weight: approx. 898 g
• Material: Chrome vanadium electric steel, forged, oil-hardened
• Finish: Red powder-coated
• Jaws: Special hardened teeth, hardness approx. 56 HRC
• Capacity:

    Pipes: up to Ø 42 mm (1 5/8 inch)

    Nuts: up to 42 mm

Features:

• Time-saving, precise adjustment of gripping width directly on the workpiece at the push of a button
• Self-locking action for less effort
• Pinch guard prevents fingers being pinched
• Maximum load capability thanks to completely hardened handles
• Standard: DIN 5234
• REACH compliant: does not contain SVHC
• RoHS compliant: not applicable

• Length: 420 mm
• Weight: approx. 1470 g
• Material: Chrome vanadium electric steel, forged, oil-hardened
• Finish: Red powder-coated
• Jaws: Special hardened teeth, hardness approx. 56 HRC
• Capacity:

    Pipes: up to Ø 60 mm (2 3/8 inch)

    Nuts: up to 60 mm

Features:

• Time-saving, precise adjustment of gripping width directly on the workpiece at the push of a button
• Self-locking action for less effort
• Pinch guard prevents fingers being pinched
• Maximum load capability thanks to completely hardened handles
• Standard: DIN 5234
• REACH compliant: does not contain SVHC
• RoHS compliant: not applicable
• Dimensions: 420 × 84 × 28 mm

• Length: 180 mm
• Weight: 230 g
• Max Jaw Opening: 40 mm (1 1/2 inches)
• Adjustment Positions: 15
• Material: Chrome vanadium electric steel, forged, oil-hardened
• Finish: Grey atramentized with polished head
• Handles: Non-slip plastic coating

Standard: DIN ISO 8976

REACH Compliant: Yes (does not contain SVHC)

RoHS Compliant: Not applicable

Key Features:

Combines pliers and wrench in one tool

Replaces entire sets of metric and imperial spanners

Smooth jaws for damage-free installation of plated fittings – ideal for working directly on chrome

Excellent for gripping, holding, pressing, and bending workpieces

Zero backlash jaw pressure protects sensitive edges

Fast adjustment via push-button directly on the workpiece

Parallel jaws allow flexible adjustment up to 40 mm

Ratchet-type action enables quick tightening and releasing of bolts

High lever transmission (>10:1) for strong gripping power

Laser-etched scale for pre-setting jaw width

Compact and lightweight with improved gripping capacity

• Length: 300 mm
• Weight: approx. 645 g
• Material: Chrome vanadium electric steel, forged, oil-hardened
• Finish: Grey atramentized, polished head
• Handles: With non-slip plastic coating
• Capacity:

    Nuts: up to 68 mm (2 1/2 inch)

Features:

• Replaces entire sets of metric and imperial spanners
• Smooth jaws for damage-free installation of plated fittings
• Quick adjustment by push button directly on the workpiece
• Zero backlash jaw pressure prevents damage to edges
• Parallel jaws for solid grip and flexible adjustment
• Ratchet-type principle for quick tightening and release
• High lever transmission (approx. 10:1) for strong gripping power
• Also suitable for gripping, holding, pressing, and bending workpieces
• Adjustment positions: 24
  
  
  

Dimensions: 300 × 68 × 17 mm

REACH compliant: does not contain SVHC

RoHS compliant: not applicable

Replaces entire sets of metric and imperial spanners.

Smooth jaws for damage-free installation of plated fittings – ideal for working directly on chrome.

Parallel jaws ensure a solid grip and allow flexible adjustment up to 52 mm (2 inches).

Push-button adjustment directly on the workpiece.

Zero backlash jaw pressure protects sensitive components.

Ratchet principle allows quick tightening and release of bolted connections.

High lever transmission (>10:1) for strong gripping power.

Multi-component handles for comfortable grip.

Laser-etched scale for presetting jaw width.

Technical Specifications:

Length: 250 mm

Weight: 468 g

Material: Chrome vanadium electric steel, forged and oil-hardened

Finish: Grey atramentized head, polished

Handle type: Multi-component grips

Adjustment positions: 19

Jaw capacity: Up to 52 mm / 2 inches

Jaw thicknesses: B1 = 8.0 mm, B2 = 8.0 mm, B3 = 14.0 mm

REACH compliant: Does not contain SVHC

RoHS compliant: Not applicable

This tool is ideal for gripping, holding, pressing, and bending workpieces with precision and care.