Pliers

• Tool Type: Electronics Diagonal Cutter
• Length: 116 mm
• Weight: 70 g
• Material: Special tool steel, forged, oil-hardened
• Head Finish: Mirror polished
• Handles: Multi-component ergonomic grips
• Cutting Edge Hardness: Approx. 57 HRC

Cutting Capacities:

Soft wire: up to Ø 1.3 mm

Medium-hard wire: up to Ø 0.8 mm

Features:

• Precision tool for fine cutting in electronics and precision mechanics
• Pointed head without bevel – ideal for confined spaces
• Sturdy, zero-backlash box joint for durability
• Low-friction double spring for smooth and even opening
• Mirror polish with oil film for rust protection
• Not suitable for cutting hard wire

Precision pliers for ultra-fine cutting work, ideal for electronics and fine mechanics.

Key Features:

Cutting edges: Ground, extremely sharp, without bevel – designed for flush cutting.

Precision tips: Shaped to cut wires close to surfaces, even as thin as Ø 0.2 mm.

Cutting type: Shear cut with controlled micro cutting edge misalignment for precise cuts and long tool life.

Material: Surgical-grade INOX stainless steel.

Hardness: Cutting edge hardness approx. 54 HRC.

Joint: Stainless steel rivet for durability.

Handles: Multi-component grips for comfort and control.

Spring mechanism: Includes opening spring and limiter for ease of repetitive work.

Movement: Extremely smooth for minimal operator fatigue.

Technical Specifications:

• Length: 125 mm
• Weight: 56 g
• Dimensions: 125 x 65 x 13 mm
• Jaw length (B): 9 mm
• Jaw thickness (D): 7.5 mm
• Head width (A): 13.5 mm

Cutting capacity:

Soft wire: Ø up to 1.6 mm

Medium-hard wire: Ø up to 1.0 mm

Compliance:

Standard: DIN ISO 9654

REACH: Compliant (no SVHC)

RoHS: Not applicable

This tool is especially appreciated by professionals such as electronics engineers, mechatronics technicians, and industrial electricians for its precision, durability, and ergonomic design.

Description:

Precision pliers designed for ultra-fine cutting tasks in electronics and fine mechanics. The ESD version features handles that safely discharge electrostatic energy, protecting sensitive electronic components.

Key Features:

Cutting edges: Ground, very sharp, without bevel – ideal for flush cutting

Cutting edge hardness: Approx. 54 HRC

Material: INOX stainless steel (surgical grade)

Cutting type: Shear cut with controlled micro cutting edge misalignment for precision and durability

Joint: Stainless steel rivet for smooth operation

Handles: Multi-component ESD-safe grips

Opening spring and limiter: For ergonomic use and reduced fatigue

Precision tips: Allow cutting wires as thin as Ø 0.2 mm close to surfaces

Cutting Capacities:

Soft wire: Ø 0.2 – 1.6 mm

Medium hard wire: Ø 1.0 mm

Dimensions:

Length: 125 mm

Jaw length (B): 9 mm

Jaw thickness (D): 7.5 mm

Head width (A): 13.5 mm

Weight: 56 g

Compliance:

Standard: DIN ISO 9654

REACH: Compliant (no SVHC)

RoHS: Not applicable

• Very precise diagonal cutter for electronics and fine work
• Cutting edges induction-hardened, suitable for fine wires and components
• Material: Chrome vanadium electric steel, forged, multi-stage oil-hardened
• Length: 140 mm
• Weight: approx. 100 g
• Cutting capacities:

    Soft wire: Ø 1.6 mm

    Medium-hard wire: Ø 1.0 mm

• Handles: multi-component grips, ergonomic design
• Advantages: Extremely precise cut, ideal for electronics and delicate work

Precision side cutter for ultra-fine cutting work, ideal for electronics and fine mechanics, with ESD-safe handles.

Key Features:

15 mm longer version for greater stability and cutting performance

Precision-ground cutting edges without bevel for flush cutting

Shear cut with micro cutting edge misalignment for long service life

INOX surgical steel, rustproof and durable

Cutting edge hardness approx. 54 HRC

Precision tips cut wires from Ø 0.2 mm close to surfaces

Opening spring and limiter for ergonomic, fatigue-free work

Extremely smooth movement thanks to stainless steel rivet joint

Multi-component grips, ESD-safe

Technical Specifications:

Length: 140 mm

Weight: 77 g

Jaw length (B): 12.3 mm

Jaw thickness (D): 9.2 mm

Head width (A): 15.7 mm

Standards: DIN ISO 9654, DIN EN 61340-5

REACH: Compliant (no SVHC)

RoHS: Not applicable

Cutting capacity:

Soft wire: Ø 0.2 – 2.1 mm

Medium-hard wire: Ø up to 1.2 mm

VDE-tested precision pliers for ultra-fine cutting work in electronics and fine mechanics, designed for safe use on live parts up to 1000 V.

Key Features:

Cutting edges: Ground, extremely sharp, without bevel – for flush cutting

Cutting type: Shear cut with controlled micro cutting edge misalignment for precise cuts and long service life

Material: INOX tool steel, polished

Cutting edge hardness: Approx. 54 HRC

Joint: Stainless steel rivet for smooth movement and durability

Handles: Insulated with multi-component grips, VDE-tested

Spring mechanism: Includes opening spring and limiter for ergonomic, fatigue-free work

Precision tips: Cut wires close to surfaces from Ø 0.2 mm

Technical Specifications:

Length: 125 mm

Weight: 60 g

Dimensions: 125 × 78 × 18 mm

Jaw length (B): 9 mm

Jaw thickness (D): 7.5 mm

Head width (A): 13.5 mm

Cutting capacity:

Soft wire: Ø 0.2 – 1.6 mm

Medium-hard wire: Ø up to 1.0 mm

Compliance:

Standards: DIN ISO 9654, DIN EN 60900, IEC 60900

REACH: Compliant (no SVHC)

RoHS: Not applicable

This tool is ideal for professionals working in electrical engineering and electronics, offering precision, safety, and comfort for demanding tasks.

Features:

• Very sharp cutting edges without bevel – for flush cuts
• Cutting capacity: soft wire up to Ø 1.6 mm, medium hard wire up to Ø 1.0 mm
• Cutting edge hardness: approx. 54 HRC
• Made of INOX tool steel (surgical stainless steel)
• Opening spring and limiter – smooth operation
• Lead catcher – prevents uncontrolled loss of wire ends
• Weight: 57 g
• Dimensions: 125 x 48 x 12 mm
• Complies with DIN ISO 9654
• REACH compliant (does not contain SVHC)

Precision pliers for ultra-fine cutting work, ideal for electronics and fine mechanics.

Key Features:

Cutting edges: Ground, extremely sharp, without bevel – designed for flush cutting.

Precision tips: Shaped to cut wires close to surfaces, even as thin as Ø 0.2 mm.

Cutting type: Shear cut with controlled micro cutting edge misalignment for precise cuts and long tool life.

Material: Special tool steel, burnished.

Hardness: Cutting edge hardness approx. 60 HRC (induction-hardened).

Joint: Stainless steel rivet for durability.

Handles: Multi-component grips for comfort and control.

Spring mechanism: Includes opening spring and limiter for ease of repetitive work.

Movement: Extremely smooth for minimal operator fatigue.

Head design: Narrow head for working in tight spaces, such as densely packed circuit boards.

Technical Specifications:

• Length: 125 mm
• Weight: 55 g
• Dimensions: 125 x 60 x 13 mm
• Jaw length (B): 9 mm
• Jaw thickness (D): 7.5 mm
• Head width (A): 12.5 mm

Cutting capacity:
Soft wire: Ø 0.2 – 1.0 mm

Compliance:

Standard: DIN ISO 9654

REACH: Compliant (no SVHC)

RoHS: Not applicable

This model is especially valued by professionals in electronics, mechatronics, and precision engineering for its accuracy, ergonomic design, and long-lasting performance.

Precision diagonal cutting pliers designed for ultra-fine cutting work in electronics and fine mechanics, with ESD-safe handles for electrostatic discharge protection.

Key Features:

Cutting edges: Ground, extremely sharp, without bevel – for flush cutting.

Cutting type: Shear cut with controlled micro cutting edge misalignment for precise cuts and long service life.

Material: Special tool steel, burnished; induction-hardened cutting edges (approx. 62 HRC).

Handles: Multi-component grips, electrically dissipative (ESD) – safely discharge static electricity.

Joint: Stainless steel rivet for durability and smooth movement.

Spring mechanism: Includes opening spring and limiter for repetitive work.

Movement: Extremely smooth for minimal operator fatigue.

Precision tips: Cut wires close to surfaces, even as thin as Ø 0.2 mm.

Suitable for: Cutting soft wires, medium-hard wires, and even fiber optic cables.

Technical Specifications:

Length: 125 mm

Weight: 56 g

Dimensions: 125 × 70 × 13 mm

Jaw length (B): 9 mm

Jaw thickness (D): 7.5 mm

Head width (A): 13.5 mm

Cutting capacity:

Soft wire: Ø 0.2 – 1.6 mm

Medium-hard wire: Ø up to 1.2 mm

Compliance:

Standards: DIN ISO 9654, DIN EN 61 340-5

REACH: Compliant (no SVHC)

RoHS: Not applicable

This tool is ideal for professionals working with sensitive electronic components, offering precision, safety, and comfort

Precision side cutter for ultra-fine cutting work in electronics and fine mechanics, with ESD-safe handles for electrostatic discharge protection.

Key Features:

Extra-long version (140 mm) for greater stability and cutting performance

Precision-ground cutting edges without bevel for flush cutting

Shear cut with micro cutting edge misalignment for long service life

Special tool steel, burnished and oil-hardened in multiple stages

Cutting edge hardness approx. 64 HRC (induction-hardened)

Precisely shaped tips cut wires close to surfaces from Ø 0.2 mm

Opening spring and limiter for ergonomic, fatigue-free work

Smooth movement thanks to stainless steel rivet joint

Multi-component grips, ESD-safe (DIN EN 61340-5 compliant)

Technical Specifications:

Length: 140 mm

Weight: 85 g

Jaw length (B): 12.3 mm

Jaw thickness (D): 9.2 mm

Head width (A): 15.7 mm

Standards: DIN ISO 9654, DIN EN 61340-5

REACH: Compliant (no SVHC)

RoHS: Not applicable

Cutting capacity:

Soft wire: Ø 0.2 – 2.1 mm

Medium-hard wire: Ø up to 1.4 mm

• Very precise diagonal cutter for electronics and fine work
• VDE-tested insulation up to 1000 V according to IEC 60900
• Cutting edges induction-hardened, suitable for fine wires and components
• Material: Chrome vanadium electric steel, forged, multi-stage oil-hardened
• Length: 125 mm
• Weight: approx. 85 g
• Cutting capacities:

    Soft wire: Ø 1.6 mm

    Medium-hard wire: Ø 1.0 mm

• Handles: multi-component VDE insulation, ergonomic design
• Advantages: Extremely precise cut, ideal for electronics and electrical work

• Very precise diagonal cutter for electronics and fine work
• VDE-tested insulation up to 1000 V according to IEC 60900
• Cutting edges induction-hardened, suitable for fine wires and components
• Material: Chrome vanadium electric steel, forged, multi-stage oil-hardened
• Length: 125 mm
• Weight: approx. 85 g
• Cutting capacities:

    Soft wire: Ø 1.6 mm

    Medium-hard wire: Ø 1.0 mm

• Handles: multi-component VDE insulation, ergonomic design
• Advantages: Extremely precise cut, ideal for electronics and electrical work

• Very precise diagonal cutter for electronics and fine work
• VDE-tested insulation up to 1000 V according to IEC 60900
• Cutting edges induction-hardened, suitable for fine wires and components
• Material: Chrome vanadium electric steel, forged, multi-stage oil-hardened
• Length: 125 mm
• Weight: approx. 85 g
• Cutting capacities:

    Soft wire: Ø 1.6 mm

    Medium-hard wire: Ø 1.0 mm

• Handles: multi-component VDE insulation, ergonomic design
• Advantages: Extremely precise cut, ideal for electronics and electrical work

• Ideal for tightening and loosening siphon screw connections, plastic pipe fittings, and round union nuts
• Also suitable for gentle loosening of hoses on nozzles and filter cartridges
• Fine adjustment – 25 positions for perfect adaptation to various diameters
• Working capacity: Ø 25–80 mm
• Length: 250 mm
• Weight: approx. 375 g
• Material: Chrome vanadium electric steel, forged, oil-hardened
• Finish: Black atramentized, polished head
• Handles: with non-slip plastic coating
• Standard: DIN ISO 8976
• Advantages: Robust heavy-duty design, serrated gripping jaws, ergonomic handle geometry

• Ideal for tightening and loosening siphon screw connections, plastic pipe fittings, and round union nuts
• Also suitable for gentle loosening of hoses on nozzles and filter cartridges
• Fine adjustment – 25 positions for perfect adaptation to various diameters
• Working capacity: Ø 25–80 mm
• Length: 250 mm
• Weight: approx. 375 g
• Material: Chrome vanadium electric steel, forged, oil-hardened
• Finish: Black atramentized, polished head
• Handles: multi-component grips, non-slip
• Standard: DIN ISO 8976
• Advantages: Robust heavy-duty design, serrated gripping jaws, ergonomic handle geometry

• Ideal for tightening and loosening siphon screw connections, plastic pipe fittings, and round union nuts
• Also suitable for gentle loosening of hoses on nozzles and filter cartridges
• Fine adjustment – 25 positions for perfect adaptation to various diameters
• Working capacity: Ø 25–80 mm
• Length: 250 mm
• Weight: approx. 375 g
• Material: Chrome vanadium electric steel, forged, oil-hardened
• Finish: Black atramentized, polished head
• Handles: with non-slip plastic coating
• Standard: DIN ISO 8976
• Advantages: Robust heavy-duty design, serrated gripping jaws, ergonomic handle geometry

• Length: 560 mm
• Weight: approx. 2,420 g
• Material: Chrome vanadium electric steel, forged, oil-hardened
• Finish: Red powder-coated
• Jaws: Special hardened teeth, hardness approx. 56 HRC
• Capacity:

    Pipes: up to Ø 70 mm (2 3/4 inch)

    Nuts: up to 70 mm

    Pipe inner diameter: Ø 50 mm (2 inch)

Features:

• Time-saving, precise adjustment of gripping width directly on the workpiece at the push of a button
• Self-locking action for less effort
• Pinch guard prevents fingers being pinched
• Maximum load capability thanks to completely hardened handles

Standard: DIN 5234

REACH compliant: does not contain SVHC

RoHS compliant: not applicable

Dimensions: 560 × 94 × 32 mm

• Length: 250 mm
• Weight: approx. 350 g
• Material: Chrome vanadium electric steel, forged, oil-hardened
• Finish: Grey atramentized
• Handles: With non-slip plastic coating
• Capacity:

    Clamps up to Ø 70 mm

Features:

• Rotating, universal grip inserts for reliably gripping clamps in all positions
• Jaw inserts can also be rotated under load
• Extremely good leverage for easy opening of clamps with little effort
• Slim head design for confined areas
• Additional function: detach hoses gently using serrated jaw
• Locking device for simple and secure work on clamps under tension
• One-hand release
• Suitable for standard, space-saving, spring wire hose clamps and spring band clamps up to 70 mm
• Adjustment positions: 19

Dimensions: 250 × 50 × 20 mm

REACH compliant: does not contain SVHC

RoHS compliant: not applicable

• Length: 180 mm
• Weight: 255 g
• Max Jaw Opening: 40 mm (1 1/2 inches)
• Adjustment Positions: 15
• Material: Chrome vanadium electric steel, forged, oil-hardened
• Finish: Grey atramentized with polished head
• Handles: Multi-component grips

REACH Compliant: Yes (does not contain SVHC)

RoHS Compliant: Not applicable

Key Features:

Combines pliers and wrench in one tool

Replaces entire sets of metric and imperial spanners

Smooth jaws for damage-free installation of plated fittings – ideal for working directly on chrome

Excellent for gripping, holding, pressing, and bending workpieces

Zero backlash jaw pressure protects sensitive edges

Fast adjustment via push-button directly on the workpiece

Parallel jaws allow flexible adjustment up to 40 mm

Ratchet-type action enables quick tightening and releasing of bolted connections

Reliable hinge bolt locking prevents unintentional shifting

High lever transmission (>10:1) for strong gripping power

• Length: 150 mm
• Weight: approx. 193 g
• Material: Chrome vanadium electric steel, forged, oil-hardened
• Finish: Chrome-plated head
• Handles: Multi-component comfort grips (blue/red)
• Capacity:

    Nuts: up to 27 mm (1 1/16 inch)

Features:

• Replaces entire sets of metric and imperial spanners
• Serrated jaws for better grip (S02 version)
• Quick adjustment by push button directly on the workpiece
• Zero backlash jaw pressure prevents damage to edges
• Parallel jaws for solid grip and flexible adjustment
• Ratchet-type principle for quick tightening and release
• High lever transmission (approx. 10:1) for strong gripping power
• Also suitable for gripping, holding, pressing, and bending workpieces
• Additional function: tie-wrap removal
• Adjustment positions: 14

Dimensions: 150 × 48 × 20 mm

REACH compliant: does not contain SVHC

RoHS compliant: not applicable