For treatment, the oil-containing condensate first passes under pressure into the pressure relief chamber.
There, the overpressure is reduced, without causing turbulence in the subsequent separation tank for free oil separation.
Carried coarse dirt particles are retained in a removable catch.
In the separation tank, the oil settles on the surface through gravity separation and is led into the overflow-proof oil catch tank (version available on request).
The filter makes the difference: The pre-cleaned condensate flows through the oleophilic pre-filter, which has a large active filter area. Flowing through from the inside to the outside, it binds the remaining oil droplets and also absorbs residual, floating oil in the filter chamber.
In the OEKOSORB® main filter with cartridge technology, the last oil components are reliably retained. What remains is water for direct discharge into the sewage system.
The advantages at a glance
System-compatible size
Installation on wall possible with ÖWAMAT® 10 and ÖWAMAT® 11
Long service life of the filter units
Easy retrofitting of a heater at any time
Easiest handling by cartridge technology
Type approval with and without free oil separation
Compressed air filters are used for highly efficient removal of solid particles, water, oil, aerosols, hydrocarbons, odors and vapors from compressed air systems.
To achieve the required quality of compressed air, filters that gradually remove all types of solid and liquid contaminants from the compressed air must be installed in the compressed air line.
Your advantages through better quality compressed air:
Safe filtration of both liquids such as water and aerosols as well as particles, dust and gases
Better working and production conditions
Optimum protection of connected tools and machines
Improved product quality through reduction of rejects
Protection of the compressed air system against contamination
Increase of productivity by reduction of instant maintenance
For separating solid contaminants up to 1μm.
Operating temperature 1.5 to 65 ° C, absolute compressed air quality according to ISO 8573-1.
for safe separation of condensate and particles
Complete with filter element and float valve
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Flow-optimized air supply for up to 75% less resistance
Assembly of the filter elements without cross-sectional narrowing and disturbing tie rods, thus reduced flow resistance and easy element change even in confined spaces
Cavity volume of the borosilicate filter material of 96% ensures the lowest pressure loss
CLEARPOINT® filter housing made of water-resistant aluminum and additionally anodised on the inside, therefore increased operational safety and reduced flow resistance due to permanently smooth inner surfaces
100% control when opening the filter housing by a secure locking mechanism, when opened under pressure a warning signal sounds
With thermally highly resistant (up to 120 ° C), mechanically highly resistant, chemically resistant and silicone-free needle felt drainage layer (in contrast to foam material of other filter makes)
Stable construction of the filter element - it is not possible to inflate or rupture the drainage layer, thereby ensuring the constant use of the entire filter surface
for the separation of oil vapors, odors and flavorings via adsorption and in the second stage of solid particles
Residual content of oil vapor up to 0.003 mg / m³ at 20 ° C and 1 bar
absolute compressed air quality according to ISO 8573-1
For compressed air of the highest quality, eg, for breathing air, in analytical technology or semi-luxury bottling
Pure compressed air in connection with upstream ultrafine filter
For automatic, timed draining of condensate or other non-aggressive fluids from the compressed air system Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
