The frame is immediately tool storage as well as all-round protection for all sensitive components
The 2-cylinder high-performance gray cast iron unit in the V position and the low speed ensure maximum smoothness and service life.
Flexible armored hose line with heat protection prevents vibration breakage
One manometer each to indicate the tank pressure and the set working pressure
Three compressed air supply points with safety quick-release couplings for filtered compressed air, filtered and oiled compressed air and a direct compressed air outlet from the compressed air reservoir
High quality CONDOR pressure switch
Puncture-proof PU foam wheels in conjunction with the wide wheelbase ensure comfortable and safe transport
Ten-year rust-through warranty on powder-coated compressed air tank
High quality electric motor with high torque and motor start unloading, thus ensuring easy start-up
Electric motor equipped with motor protection switch
Fully automatic on-off operation
With all safety devices
Your advantages
The on-off switch is protected above and easily accessible.
The ergonomically designed control panel is clearly structured and self-explanatory.
One manometer each to indicate the tank pressure and the set working pressure
Three sampling points for filtered compressed air, filtered and oiled compressed air and a direct outlet from the compressed air tank on the control panel
Standard with safety quick couplings and high quality CONDOR pressure switch
With powerful 2-cylinder high-performance gray cast iron unit in V position
With low-wear direct drive
service
Standard with high-quality CONDOR pressure switch
The on-off switch is protected above and easily accessible.
The ergonomically designed control panel is clearly structured and self-explanatory.
One manometer each to indicate the tank pressure and the set working pressure
One compressed air outlet for filtered compressed air, filtered and oiled compressed air and one direct compressed air outlet from the tank
Standard with comfort safety quick couplings
footwell
At the footwell there are no fittings or switches that can be damaged during tipping and transport.
protection
The frame is immediately tool storage as well as all-round protection for all sensitive components
The fittings are optimally protected against damage by the tubular frame and the overhead shelf.
Filter regulators
The working pressure is infinitely adjustable via the standard filter pressure regulator, with simultaneous dirt and condensate separation
mist oiler
The standard fog lubricator can be used to ensure adequate supply of the tools with lubricant.
High performance aggregate HOS
The precisely machined piston is equipped with a high-alloy piston ring, oil scraper ring and oil scraper ring, which seal the piston from the cylinder wall.
The crankcase is filled with oil, which is sprayed against the cylinder wall with each piston stroke.
The oil scraper wipes the oil-wetted cylinder wall downwards.
landing gear
The large, stable wheels with puncture-proof PU foam tires in conjunction with the wide wheelbase ensure safe and comfortable transport even on uneven ground such as when climbing stairs
handles
Standard with fold-out handles for lifting during transport
hose hook
Standard with internally protected hose hook
Hose not included
High quality container
Ten-year rust-through warranty on powder-coated compressed air tank
Control panel Ergonomically favourably positioned, clearly structured and self-explanatory
manometer to display the tank pressure
direct compressed air output with one-hand safety coupling from the compressed air tank
filter pressure reducer to set the working pressure
manometer to display the set working pressure
compressed air output one hand Safety coupling for filtered compressed air
mist lubricator for metered supply of lubricant to the tools
compressed air outlet one hand safety coupling for filtered and lubricated compressed air
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Oil-free compressor, no oil change and no oil in condensate
Very smooth and quiet
One pressure gauge for displaying the container and working pressure
Very smooth operation and therefore very quiet
Oil-free piston compressor: No oil change necessary and no oil in the condensate - best working quality and at the same time long service life of the pneumatic tools
Compressed air reducer for stepless adjustment of the desired working pressure
High-quality CONDOR pressure switch
Electric motor equipped with motor protection switch
Fully automatic on/off operation
One pressure gauge each for displaying the tank and working pressure
Compressed air tank powder-coated
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
All main components of the compressor are manufactured by machining using numerically controlled machine tools, including suction regulator, separator block and minimum pressure valve
The cooling takes place via a temperature-controlled centrifugal fan and an oversized combination cooler. This ensures optimal cooling even under the most extreme conditions.
Generous access panels allow easy maintenance and immediate control of the internal components, reducing the time required for inspection and maintenance to one medium.
The main operating parameters are monitored by the electronic microprocessor control NRG: In addition to the various functions, a weekly timer for switching on and off is available to meet the requirements of each customer. In addition, up to 4 machines can be controlled simultaneously according to the master / slave principle.
Standard with star-delta connection
Energy savings through frequency-controlled compressors Reducing energy consumption and protecting our precious energy resources has become a global challenge given its impact on the environment. The A-PLUS 22, 37, 55 and 75 kW range is also available in a speed control version that combines high performance with energy saving solutions. By using a variable speed compressor in a typical installation, you save a significant amount of energy. Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
EasyTRONIC MICRO II electronic control with pressure sensor operation as standard, thus preventing motor overload, reducing wear and extending service life
With star-delta switch
High cooling effect and lower noise level due to thermostatically controlled radial fan
Operating hours counter records load and overrun times, thus ensuring compliance with maintenance intervals - Indication of maintenance requirement via automatic message
Rotation direction control for the motor avoids possible damage during commissioning or after a change of location
Screw compressor with wear-resistant Poly V ribbed belt drive and carriage tensioning system
Easy maintenance due to easily accessible elements
Optimum operating temperatures due to thermostatically controlled fan, optimum cooling air flow and generously dimensioned heat exchanger, thus longer service life, lower fluctuations in oil temperature than with thermostat control
Aftercooler as standard, thus less effort for drying and filtration of the generated compressed air
Small external dimensions, thus easy transport and installation
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Compressed air lines and containers with a long service life
Comfort safety quick couplings for maximum work safety
Comfortable, back-friendly transport in an upright position and without lifting
Designed for demanding continuous use when oil-free and clean compressed air is required
Air is blown through the cooling chambers of the cylinder by means of a fan; thus optimum cooling is achieved
Large piston, movably mounted, resulting in 60% more power compared to tilt piston systems
Cylinder running surfaces with high-precision and micro-smooth surface for minimum friction
The high-performance piston or piston ring made of a graphite-Teflon-carbon special compound has a much longer service life than a simple piston ring made of Teflon
High-quality maximum equipment
Filter pressure regulator for stepless adjustment of the working pressure, with simultaneous separation of dirt, oil and condensate
One compressed air outlet each for filtered compressed air, filtered and oiled compressed air and a direct outlet on the compressed air tank
Two comfort safety quick couplings
High-quality CONDOR pressure switch
One pressure gauge each for tank and working pressure
Simple condensate drain via ball valve
Compressed air lines and reservoirs with long service life
Flexible armored hose line with heat protection prevents vibration fractures
Inside and outside hot-dip galvanized, corrosion-protected compressed air reservoir with 15-year warranty against rusting through
Comfort safety quick couplings
One-hand safety couplings according to DIN EN 983 used by AIRCRAFT as the first manufacturer in series production
Two separate locking systems for maximum working safety
No whipping of the hose line during uncoupling
Convenient transport
Transport back-friendly in upright position and without lifting
Additional transport handle directly on the container
Puncture-proof PU foam wheels
Stable steering chassis with parking brake
Immediately ready for use
Fully automatic on-off operation
With all safety devices
Completely ready for connection
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Easy installation and accessibility of all maintenance positions
Coaxial screw-type compressor with maintenance-free drive and maximum energy efficiency in all pressure ranges. Low compressor speeds and low load on the bearings of the patented direct drive ensure a very long service life.
EasyTRONIC Micro II electronic control for reliability and efficiency
Prevents motor overload, reduces wear and makes for a longer service life
Monitoring of operating hours, temperature and motor overload
Phase sequence relays control the direction of rotation of the motor, thereby avoiding possible damage during commissioning or after relocation
Optimized cooling system
Low-noise centrifugal fan guarantees optimal operating temperatures even under unfavourable conditions
Thermostatically and electronically controlled fan and generously sized heat exchanger result in a longer service life and less fluctuation in oil temperature
User-friendly in all details
Low noise, suitable for deployment in any work environment
Small footprint facilitates transport and deployment
Service-friendly thanks to optimum accessibility and easy removal and installation of all components that require maintenance
All air and oil lines are made of heat-resistant rubber
Equipped with a star delta circuitry as factory standard
Ready to connect with all fittings and safety equipment
K models with Integrated refrigeration dryer
More reliable compressed air system without costly downtimes and production delays while simultaneously ensuring product quality
Fully integrated into the housing
Ready for use without installation overhead
Equipped with control panel and time-controlled condensate drain
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Innovative LOGIN control with 4.3" touch screen for easy operation and full control of all functions.
Energy-efficient IE4 motor
Rotation direction control for the motor, prevents damage during start-up or after a change of stand location
High cooling effect and low noise level due to thermostatically controlled radial fan
Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled radial fan, optimum cooling air flow and generously dimensioned heat exchangers
Aftercooler reduces the effort for drying and filtration of the generated compressed air
Star-delta switching as standard
Easy to service: simple removal and installation of all components requiring maintenance
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Extremely quiet due to sound-insulated housing and additional silencer on the intake filter
Two-cylinder high-performance unit made of grey cast iron with low speed guarantee particularly quiet and low-vibration operation -> less wear - longer service life
Large fan impeller on the compressor and temperature-controlled radial fan on the housing ensure optimum cooling of the entire interior
Equipped with glycerine pressure gauge, operating hours counter and error display via LED lights
Extremely quiet due to sound-insulated housing and additional silencer on the intake filter
Suitable for installation even in noise-sensitive areas and the direct working environment
Two-cylinder high-performance unit made of grey cast iron with low speed warrantys particularly quiet and low-vibration operation: less wear and longer service life
Large fan impeller on the compressor and temperature-controlled radial fan on the housing ensure optimum cooling of the entire interior
Inter- and aftercooler as well as an additional air duct between motor and compressor reduce condensate formation
High-quality Condor pressure switch
Equipped with glycerine pressure gauge, hour meter and fault indication via LED lights
Quality electric motor with motor protection switch and start-up relief
Integrated phase monitoring
Facility for easy tensioning of the V-belt
Service-friendly design
Ready for connection with all fittings and safety devices
Models with compressed air tank: Galvanised air reservoir inside and out with 15-year warranty against rusting through
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Compressed air lines and containers with a long service life
Comfort safety quick couplings for maximum work safety
Comfortable, back-friendly transport in an upright position and without lifting
Designed for demanding continuous use when oil-free and clean compressed air is required
Air is blown through the cooling chambers of the cylinder by means of a fan; thus optimum cooling is achieved
Large piston, movably mounted, resulting in 60% more power compared to tilt piston systems
Cylinder running surfaces with high-precision and micro-smooth surface for minimum friction
The high-performance piston or piston ring made of a graphite-Teflon-carbon special compound has a much longer service life than a simple piston ring made of Teflon
High-quality maximum equipment
Filter pressure regulator for stepless adjustment of the working pressure, with simultaneous dirt, oil and condensate separation
One compressed air outlet each for filtered compressed air, filtered and oiled compressed air and a direct outlet on the compressed air tank
Two comfort safety quick couplings
High-quality CONDOR pressure switch
One pressure gauge each for container and working pressure
Simple condensate drain via ball valve
Compressed air lines and reservoirs with long service life
Flexible armored hose line with heat protection prevents vibration fractures
Inside and outside hot-dip galvanized, corrosion-protected compressed air tank with 15-year warranty against rusting through
Comfort safety quick couplings
One-hand safety couplings according to DIN EN 983 used as standard by AIRCRAFT as first manufacturer
Two separate locking systems for maximum working safety
No whipping of the hose line during uncoupling
Convenient transport
Transport back-friendly in upright position and without lifting
Additional transport handle directly on the container
Puncture-proof PU foam wheels
Stable steering chassis with parking brake
Immediately ready for use
Fully automatic on-off operation
With all safety devices
Completely ready for connection
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
EasyTRONIC MICRO II electronic control with pressure sensor operation as standard, thus preventing motor overload, reducing wear and extending service life
With star-delta switch
High cooling effect and lower noise level due to thermostatically controlled radial fan
Operating hours counter records load and overrun times, thus ensuring compliance with maintenance intervals - Indication of maintenance requirement via automatic message
Rotation direction control for the motor avoids possible damage during commissioning or after a change of location
Screw compressor with wear-resistant Poly V ribbed belt drive and carriage tensioning system
Easy maintenance due to easily accessible elements
Optimum operating temperatures due to thermostatically controlled fan, optimum cooling air flow and generously dimensioned heat exchanger, thus longer service life, lower fluctuations in oil temperature than with thermostat control
Aftercooler as standard, thus less effort for drying and filtration of the generated compressed air
Small external dimensions, thus easy transport and installation
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
All main components of the compressor are manufactured by machining using numerically controlled machine tools, including suction regulator, separator block and minimum pressure valve
The cooling takes place via a temperature-controlled centrifugal fan and an oversized combination cooler. This ensures optimal cooling even under the most extreme conditions.
Generous access panels allow easy maintenance and immediate control of the internal components, reducing the time required for inspection and maintenance to one medium.
The main operating parameters are monitored by the electronic microprocessor control NRG: In addition to the various functions, a weekly timer for switching on and off is available to meet the requirements of each customer. In addition, up to 4 machines can be controlled simultaneously according to the master / slave principle.
Standard with star-delta connection
Energy savings through frequency-controlled compressors Reducing energy consumption and protecting our precious energy resources has become a global challenge given its impact on the environment. The A-PLUS 22, 37, 55 and 75 kW range is also available in a speed control version that combines high performance with energy saving solutions. By using a variable speed compressor in a typical installation, you save a significant amount of energy. Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Innovative LOGIN control with 4.3" touch screen for easy operation and complete control over all functions
Connection of up to eight compressors possible, no matter if with constant or variable speed
All information on current operating status at a glance
Rotation direction control for the motor, prevents damage during start-up or after a change of location
Low noise emission (only max. 67 dB) during operation, due to extremely low speed of the screw compressor and use of a low-noise radial fan
Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled centrifugal fan, optimum cooling air flow and generously dimensioned heat exchangers
Aftercooler reduces the effort for drying and filtration of the generated compressed air
Star-delta switching as standard
Easy to service: simple removal and installation of all components requiring maintenance
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
For continuous air demand and discontinuation operation
Electronic control for reliability and efficiency
Optimized oil separation system
One point for unfiltered, filtered and filtered-oiled Compressed air
Smooth and quiet
Just as mobile and compact as piston compressors, but with the great advantage of being able to generate compressed air continuously without any cooling pauses
Can also be used in intermittent operation due to oil temperature control
Electronic temperature control for optimum oil temperature
Optimum oil viscosity due to constant temperature, therefore also suitable for intermittent operation with frequent load changes
Temperature control of the oil prevents condensation and minimizes wear
Better energy efficiency compared to a piston compressor with the same delivery capacity
Additional oil heat exchanger for cooling
K-Tronic electronic control system for reliability and efficiency
Adjustment of the cut-in and cut-out pressure
Direction of rotation control
Monitoring and control of the oil temperature
Maintenance interval display
Optimized oil separation system
Effective oil pre-separation by gravity, as the oil sump is located at the lowest point
Oil separator cartridge and oil filter cartridge easily accessible for maintenance
Integrated design of the compressor unit
Convenience and high operational reliability thanks to integration and short connections of all key components on the compressor unit
Maintenance-free direct drive
Freewheel valve for load-free operation after reaching the set pressure
Lightweight, compact and quiet
Can be used in mobile applications or where space is limited
Highly efficient and low-noise fan
Smooth-running compressor with low noise level
High-quality equipment
Compressed air extraction via convenient safety quick-release couplings
One extraction point each for unfiltered, filtered and filtered-oiled compressed air
Powder-coated compressed air tank with ten-year guarantee against rusting through
Flexible armored hose line with heat protection prevents vibration fractures
Control panel Ergonomically positioned, clearly structured and self-explanatory
Pressure gauge for displaying the tank pressure
Compressed air direct outlet with one-hand safety coupling from the compressed air tank
Filter pressure reducer for setting the working pressure
Pressure gauge for displaying the set working pressure
Compressed air outlet One-hand safety coupling for filtered compressed air
Mist lubricator for metered supply of lubricant to the tools
Compressed air outlet One-hand safety coupling for filtered and lubricated compressed air
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Innovative LOGIN control with 4.3" touch screen for easy operation and complete control over all functions
Connection of up to eight compressors possible, no matter if with constant or variable speed
All information on current operating status at a glance
Rotation direction control for the motor, prevents damage during start-up or after a change of location
Low noise emission (only max. 67 dB) during operation, due to extremely low speed of the screw compressor and use of a low-noise radial fan
Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled centrifugal fan, optimum cooling air flow and generously dimensioned heat exchangers
Aftercooler reduces the effort for drying and filtration of the generated compressed air
Service-friendly: easy removal and installation of all components requiring maintenance
Energy saving through frequency control
Ideal for frequently changing compressed air consumption
Compressor delivery rate adjusts to actual consumption
Electronic control monitors motor and compressor speed and keeps line pressure constant even when consumption fluctuates widely
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
The two-stage compression 2-cylinder high-performance unit enables a very low speed, resulting in a particularly quiet and low-vibration run.
The large fan ensures optimal cooling.
Intercooler and aftercooler ensure a low container inlet temperature and thus reduce condensation.
Quality electric motors equipped with motor protection switch
Ready for connection with all fittings such as pressure switch for fully automatic on-off operation, safety and check valve, condensate and air release valve for autonomous operation
Fifteen-year rust-through warranty on inside and outside hot-dip galvanized compressed air tank
With high-quality CONDOR pressure switch
Ready for connection with all fittings
Room amenities
High-performance gray cast iron unit with low speed
Aftercooler with large cooling fins ensures low tank inlet temperature
The flexible armored hose line with heat protection prevents a vibration break.
Side compressors are used
if the existing air volume is too small.
when peak loads have to be covered.
if 100% safety must be warrantyd.
if old equipment would require expensive repairs.
Recommended accessories
AIRCRAFT tank batteries as 2 or 4 batteries for up to 400 liters additional air reserve
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Innovative LOGIN control with 4.3" touch screen for easy operation and complete control over all functions
Connection of up to eight compressors possible, no matter if with constant or variable speed
All information on current operating status at a glance
Rotation direction control for the motor, prevents damage during start-up or after a change of location
Low noise emission (only max. 67 dB) during operation, due to extremely low speed of the screw compressor and use of a low-noise radial fan
Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled centrifugal fan, optimum cooling air flow and generously dimensioned heat exchangers
Aftercooler reduces the effort for drying and filtration of the generated compressed air
Star-delta switching as standard
Easy to service: simple removal and installation of all components requiring maintenance
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Easy installation and accessibility of all maintenance positions
Coaxial screw-type compressor with maintenance-free drive and maximum energy efficiency in all pressure ranges. Low compressor speeds and low load on the bearings of the patented direct drive ensure a very long service life.
EasyTRONIC Micro II electronic control for reliability and efficiency
Prevents motor overload, reduces wear and makes for a longer service life
Monitoring of operating hours, temperature and motor overload
Phase sequence relays control the direction of rotation of the motor, thereby avoiding possible damage during commissioning or after relocation
Optimized cooling system
Low-noise centrifugal fan guarantees optimal operating temperatures even under unfavourable conditions
Thermostatically and electronically controlled fan and generously sized heat exchanger result in a longer service life and less fluctuation in oil temperature
User-friendly in all details
Low noise, suitable for deployment in any work environment
Small footprint facilitates transport and deployment
Service-friendly thanks to optimum accessibility and easy removal and installation of all components that require maintenance
All air and oil lines are made of heat-resistant rubber
Equipped with a star delta circuitry as factory standard
Ready to connect with all fittings and safety equipment
K models with Integrated refrigeration dryer
More reliable compressed air system without costly downtimes and production delays while simultaneously ensuring product quality
Fully integrated into the housing
Ready for use without installation overhead
Equipped with control panel and time-controlled condensate drain
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Extremely quiet due to sound-insulated housing and additional silencer on the intake filter
Two-cylinder high-performance unit made of grey cast iron with low speed guarantee particularly quiet and low-vibration operation -> less wear - longer service life
Large fan impeller on the compressor and temperature-controlled radial fan on the housing ensure optimum cooling of the entire interior
Equipped with glycerine pressure gauge, operating hours counter and error display via LED lights
Extremely quiet due to sound-insulated housing and additional silencer on the intake filter
Suitable for installation even in noise-sensitive areas and the direct working environment
Two-cylinder high-performance unit made of grey cast iron with low speed warrantys particularly quiet and low-vibration operation: less wear and longer service life
Large fan impeller on the compressor and temperature-controlled radial fan on the housing ensure optimum cooling of the entire interior
Inter- and aftercooler as well as an additional air duct between motor and compressor reduce condensate formation
High-quality Condor pressure switch
Equipped with glycerine pressure gauge, hour meter and fault indication via LED lights
Quality electric motor with motor protection switch and start-up relief
Facility for easy tensioning of the V-belt
Service-friendly design
Ready for connection with all fittings and safety devices
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
From 7.5 kW standard with automatic star-delta switch
Fifteen-year rust-proof warranty on inside and outside hot-dip galvanized compressed air tank
Quality electric motor
High quality electric motor with motor protection switch
Start-up capacitor and start-up relief valve for easy start-up
As standard with phase inverter for easy manual reversal of the direction of rotation
Compressed air compression via high-performance aggregate HOS
The start-up relief valve ensures a light, pressureless start
The two-cylinder high-performance cast iron unit and the low speed warranty a particularly quiet and low-vibration operation ; this ensures a long service life through minimized wear
Optimal lubrication of the compressor for long service life and reliability
Equipped with high-quality intake filter
Aftercooler with large cooling fins causes low boiler inlet temperature and less humidity in the compressed air to protect the compressed air tools
additionally with intercooler to the aftercooler
Corrosion-free valve plates for improved heat dissipation and longevity of the compressor.
Optimal cooling of the compressor due to large Fan and cooling air guide on the cylinder
Sturdy belt guard made of metal for optimum protection of the components and for high user safety
No vibration breakage of the compressed air supply into the boiler due to flexible armored hose line with heat protection
High-quality drive belt
Powerful and economical drive
The toothed drive belt makes it easier to start, improves smoothness and power transmission, and reduces power consumption by up to 30%
Sturdy metal belt guard
Service block operation
Equipped with a high-quality CONDOR push button switch with a robust push button function for fully automatic on / off operation
Air extraction on the maintenance block via a comfort -Safety quick coupling
On the maintenance block only fixed screw connections, no hose connections
High-quality boiler with durable rust protection
AIRCRAFT was the first manufacturer to do so The compressors of the AIRPROFI series are equipped as standard with internal and external hot-dip galvanized boilers. Fifteen-year rust-through warranty on inside and outside hot-dip galvanized compressed air tank.
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
