The SDS+ 900 W, 4J 58G860 impact hammer by GRAPHITE is a specialist 900 W SDS+ 3-function tool that is indispensable for installation and demolition work. It has drilling, impact and a shoring function, needed when chipping plastered or tiled surfaces. The maximum percussion energy is 4 J, giving the unit an advantage when tackling concrete, stone or brick. The maximum percussion rate at nominal speed is 3850 min-¹, and the maximum drilling speed is 980 min-¹. The two-finger switch contributes to its comfort. The flexible, robust power cable is in a 4 m rubber sheath and is dedicated to both professional and industrial indoor or outdoor use. The hammer is offered with: drill bit, pick, mounting key, swivel auxiliary handle, drilling depth stop with tool-free length adjustment, lubricant reservoir and practical carrying case. CE certification ensures compliance with European standards.
GRAPHITE edge trimmer (ref. 59G718) with 510W and 6-8 mm handle is designed for fine profiling work on edges. The ergonomic and soft grip handle, soft grip overlay and low weight make the trimmer easy and pleasant to work with. The trimmer is adjustable in working depth. The transparent base plate of the trimmer ensures visibility of the cutter and the work piece.
Set includes: 2 spanners, 2 router bits, 3 collets, 1 guide sleeve, 1 guide bar, 1 copying bar, 1 copying bar.
GRAPHITE's SDS+ 710W, 2.6J, case 58G537 hammer drill is a 710W specialist SDS+ tool with drilling, hammer drilling, shoeing functions and an infinitely adjustable chisel angle for precision shoeing. It can drill holes up to 24mm in diameter in concrete, 13mm in steel and 30mm in wood. The tool features spindle reversal with no loss of power at left-hand speeds and an on/off switch lock for continuous operation. When drilling, the hammer drill reaches up to 1,350 revolutions per minute and up to 5,500 strokes per minute when switched to impact. The tool's percussion energy is 2.6 J. The tool's comfortable main handle is covered with a non-slip pad, so it fits well in the hand. The kit includes a concrete drill bit, drill chuck, chuck adapter and carrying case. The unit is equipped with a flexible and durable 3 m rubber-coated power cable, also dedicated to professional and industrial applications, both indoors and outdoors. Compliance with European standards is ensured by CE certification.
GRAPHITE's 800W, 2.8J SDS+ hammer drill, 2.8J, case 58G538 is a specialist 800W SDS+ tool with drilling, hammer drilling, shoeing functions and an infinitely adjustable chisel angle for precision shoeing. It can drill holes up to 26mm in diameter in concrete and brick, 13mm in steel and 30mm in wood. The tool features spindle reversing, gradual speed adjustment and an on/off switch lock for continuous operation. When drilling, the hammer drill reaches up to 1,350 revolutions per minute and up to 5,500 strokes per minute when switched to impact. The tool's percussion energy is 2.8 J. The tool's comfortable main handle is covered with a non-slip pad, so it fits well in the hand. An additional drill bit, drill chuck, chuck adapter and carrying case are included. The unit is equipped with a flexible and durable 3 m rubber-coated power cable, also dedicated to professional and industrial applications, both indoors and outdoors. Compliance with European standards is ensured by CE certification.
Mini polisher accessories set 04-604 6 pieces 04-604-20 by NEO TOOLS is a comprehensive set consisting of: 2 pieces each of sanding papers in three different gradations (P120, P240, P600) with a diameter of 5 cm, 2 pieces of polishing sponge (6 cm), 2 pieces of medium sanding tips and 2 pieces of hard sanding tips (6 cm). The set is recommended for use with the 04-604 NEO TOOLS mini polisher.
The NEO TOOLS double-edged long end mill, widia, 10 x 50 mm, shank 8 mm 56-207 is a tool made of tungsten carbide (TCT) and intended for precise machining of wood, PVC and chipboard using router bits. The cutter head is equipped with two blades and a carbide cutting insert. Dimensions of the working part: diameter 10 mm, height 50 mm. The shank diameter is 8 mm.
The 45 mm x M14 diamond hole saw, 55-312 by NEO TOOLS, with a diameter of 45 mm and M14 thread, is designed for dry work with an angle grinder. The durable vacuum brazed diamond blank and the side holes facilitate air ventilation and removal of spoil. The working length is 40 mm and the overall length is 60 mm, making it easy to drill typical mounting holes. The maximum speed is 11,000 rpm. Applications include ceramic, stoneware, stone and concrete.
HSS-Co 8.5 mm metal drill bit, 57-048 by NEO TOOLS is a deeply ground drill bit according to DIN 338 and made of M35 steel with 5% cobalt addition. It uses an apex angle of 135° and type C shear correction. It has a cylindrical handle. The length of the working part is 75 mm and its overall length is 117 mm. The maximum speeds are: INOX 425-475 rpm, general metals 850-950 rpm. The purpose of this NEO TOOLS brand drill bit is to drill in demanding materials such as stainless, acid-resistant and heat-resistant steel.
GRAPHITE's 88 mm 55H811 adhesive removal disc is an effective tool with a diameter of 88 mm and a thickness of 15 mm, designed for professional and amateur removal of stickers and adhesive residue from car bodies. The disc is made of robust but also soft rubber that will not scratch the surface. It features a maximum speed of 4,000 revolutions per minute. It will prove its worth not only in automotive applications.
Mini polisher 04-604 3 piece accessory set 04-604-30 by NEO TOOLS is a set containing three additional accessories to increase the functionality of NEO TOOLS mini polisher 04-604: base pad, ice removal pad and nylon brush. The products will prove useful for both professional and home use.
The 35 mm x M14 diamond borer, 55-310 by NEO TOOLS, with a diameter of 35 mm and M14 thread, is designed for dry use with an angle grinder. The durable vacuum brazed (vacuum brazed) diamond blank and paraffin filling ensures cooling during drilling. The working length is 40 mm and the overall length is 60 mm, facilitating the drilling of typical mounting holes. The maximum speed is 11,000 rpm. Applications include ceramic, stoneware, stone and concrete.
NEO TOOLS bi-metal hole saw adapter 14-30 mm 57-938 is a bi-metal hole saw adapter designed to work in the 14-30 mm diameter range. Made from HSS steel, it provides high wear resistance and stability for working in a variety of materials. Application: metal, steel, stainless steel, aluminium, copper, wood and plastics. The design of the NEO TOOLS adapter enables secure seating of the hole saw and effective torque transfer.
DF003G on suure kinnitamisjõuga, harjavaba mootoriga, löögi funktsiooniga XGT® akutrell puurimiseks ja kruvide keeramiseks. Metallist 13 mm iselukustuv padrun suurendab otsiku haardevõimet ja vastupidavust. Võtmeta kiirpadrun võimaldab kiiret ja lihtsat otsiku paigaldust ning eemaldamist. Active Feedback sensing Technology (AFT) lülitab mootori välja, kui otsiku pöörlemine järsult peatub, suurendades sellega ohutust. Elektriline pidur kasutaja ohutuseks. Kõrge veekindlus koos XPT (Extreme Protection Technology) tehnoloogiaga tagab töökindluse ka rasketes tingimustes. Kinnitamisjõudu saab hõlpsalt reguleerida pöördnupu abil, samal ajal kui digiekraan annab selge visuaalse kinnituse valitud pöördemomendi kohta. Elektrooniline sidur pakub täiustatud pöördemomendi ja siduri astmeid madala, keskmise ja suure kiiruse režiimides. Kolm töörežiimi suurendavad tööefektiivsust raskete tööde puhul. Keskmise kiiruse režiim ühendab suure pöördemomendi ja kiiruse, muutes selle ideaalseteks ülesanneteks, nagu pikkade kruvide keeramine. Madala kiiruse režiimi sujuvkäivitus vähendab tagasilööki suurte inertsotsikutega töötamisel. Pöörlemissuuna vahetamise lüliti on paigutatud mugavalt leitavasse kohta, et seda oleks lihtne töö käigus kasutada.
Ere LED-tuli asub käepideme allosas, pakkudes laiemat valgustusulatust. Valgusrežiimis pikendatud järelvalgustus võimaldab töövalgustit kasutada ka eraldiseisva valgustina pimedas töökeskkonnas. Vastupidav ja pööratav vöökinnitus võimaldab tööriista mugavalt ajutiselt riputada, kui seda parasjagu ei kasutata.
The Makita HP003GZ is a high‑torque 40 V max XGT brushless cordless hammer driver drill, engineered for heavy‑duty professional applications. It is designed for demanding driving, drilling and hammer drilling tasks in wood, steel and masonry, delivering exceptional power and control.
The tool delivers 150 Nm (hard) / 88 Nm (soft) of fastening torque, with a maximum torque of up to 180 Nm. A 3‑speed mechanical gearbox (low / medium / high) provides the ideal balance between speed and torque, making it especially effective for long and large‑diameter fasteners.
Safety and precision are enhanced by Active Feedback sensing Technology (AFT), which shuts off the motor if rotation suddenly stops. The electronic clutch with digital adjustment dial allows highly accurate torque selection. XPT (Extreme Protection Technology) improves resistance to dust and moisture, ensuring reliable operation in harsh job‑site conditions.
Battery and charger not included – bare tool version.
Kiirlaadija 14,4 V ja 18 V LXT® liugakudele. Varustatud jahutusventilaatoriga, mis hoiab akut laadimise ajal jahedana ja võimaldab oluliselt kiiremat laadimist. Laadimine on optimeeritud pinge, voolu ja temperatuuri järgi. Laadimisaeg sõltub nii PD-sisendist (60 / 80 / 100 W) kui ka aku mahutavusest.
