The 1/2" max 330 Nm 18V Energy+ brushless impact spanner 04-618 by GRAPHITE is a device that functions with the Energy+ battery system. It features a 1/2" attachment and a maximum screw loosening torque of 330 Nm. It reaches 180Nm in 1st gear, 280Nm in 2nd gear and 320Nm in 3rd gear. It has the ability to operate at left-hand speeds. It is characterised by speeds of 1600 rpm (1st gear), 2000 rpm (2nd gear) and 2600 rpm (3rd gear). The impact frequency corresponds to 2000/2500/3300 bpm. The spanner is equipped with a robust brushless motor. The recommended battery capacity is 4 Ah and allows 98 minutes of idling time (for a 6 Ah battery it is 147 minutes, 8Ah 210 minutes). The GRAPHITE branded tool is recommended for mechanics, automotive enthusiasts, roofers, DIY enthusiasts and home use.
The 4 Ah Energy+ 58G004-1 battery pack by GRAPHITE is a rechargeable battery from the Energy+ series with a voltage of 18 volts. The lithium-ion battery is characterised by the use of 21700 cells and will be suitable for the Energy+ range of cordless products from GRAPHITE and NEO TOOLS.
Battery charger 58G002-1 GRAPHITE Energy+ 18V Li-Ion, with a maximum charging current of 2.4 A and a charging time of 50 min for 58G001 and 58G001-1, 100 min for 58G004 and 58G004-1, 150 min for 58G086 and 58G086-1 and 200 min for 58GE152 8Ah. An easy-to-read LED indicates connected voltage, charging in progress or the end of charging. The charger is equipped with a voltage and temperature control system for full battery and user protection. The unit has a flexible and robust power cable, also recommended for professional and industrial applications, both indoors and outdoors.
GRAPHITE Energy+ 18V, Li-Ion rechargeable battery 58G001-1 with a capacity of 2.0Ah. Rechargeable with no risk of capacity loss. Equipped with charge indicator and electronic temperature and current flow control during charging and discharging. Designed for universal use with the Energy+ battery system.
Energy+ 18V GRAPHITE cordless torch for hot air work. It is useful for shrinking heat shrink materials, taping glass and soldering, among other applications. Maximum air flow is 200l/min, maximum temperature is 550°C. Convenient use, because thanks to battery power (battery not included) and lack of cables you can use the tool in any conditions and outside the workshop or home. The device has a low weight. Includes 3 nozzles.GRAPHITE cordless torch for hot air work. It is useful for shrinking heat shrinkable materials, taping glass, soldering, etc. Maximum air flow is 200 l/min and maximum temperature 550°C. Convenient to use as thanks to battery power and no cables you can use the torch in any conditions and outside the workshop or home. The set includes 3 nozzles.
The Energy+ set: 4 Ah battery pack with charger 58GE132-1 by GRAPHITE comprises the accessories in the modern Energy+ cordless series. The 4 Ah 18 V lithium-ion battery 58G004-1 and the 2.4 A charger 58G002-1 are compatible with all Energy+ power tools from GRAPHITE and NEO TOOLS. They guarantee charging without the risk of capacity loss. The battery is also equipped with a sleep system so that it does not lose energy during long-term storage. They have a charge indicator and an electronic control system for temperature and current flow during charging as well as discharge. The battery and charger are CE certified. They will work well in both the professional and DIY workshop.
The Energy+ set: 2 Ah battery pack with charger 58GE131-1 by GRAPHITE comprises the accessories in the modern Energy+ cordless series. The 2 Ah 18 V lithium-ion battery 58G001-1 and the 2.4 A charger 58G002-1 are compatible with Energy+ power tools from GRAPHITE and NEO TOOLS. They guarantee charging without the risk of capacity loss. The battery is also equipped with a sleep system so that it does not lose energy during long-term storage. It has a charge indicator and an electronic control system for temperature and current flow during charging as well as discharge. The battery and charger are CE certified. They will work well in both the professional and DIY workshop.
Brushless jigsaw, Energy+ 58GE145 by GRAPHITE featuring a speed of 800 to 3800 rpm and a blade stroke of 26mm. The power tool has a 0-45 angle adjustment and three stages of jigsawing. It is distinguished by a maximum cut of up to 135 mm in wood and 10 mm in steel. With dust extraction and LED lighting, the tool provides comfort for projects. The quick-change blade system and sturdy aluminium base will prove its worth in any working environment. The brushless motor ensures a long period of trouble-free use and the ergonomic and handy handle offers a solid grip. The GRAPHITE jigsaw with step adapter is recommended for professionals and DIY enthusiasts.
GRAPHITE jigsaw, compatible with 18V Li-Ion GRAPHITE Energy+ batteries. The device is designed for precise and quick cutting of wood and metal, with a maximum thickness of respectively 80 mm and 10 mm. The speed control system allows operation at speeds from 0 to 2,400 strokes per minute. The jigsaw has an aluminium base with adjustable cutting angle from 0° to 45° right and left. It has a 3-step switch for pendular movement adjustment, which allows to increase the cutting speed in selected materials. The power tool is equipped with a keyless blade changing system and LED diode that illuminates the workplace. The jig saw blade (25 mm stroke) has been secured with a transparent cover made of durable polycarbonate. The tool holder of the device was adapted to work with T-type saw blades. The handle was equipped with a convenient switch with a lock to prevent accidental activation, and the grip area was covered with non-slip material for greater comfort and safety. To improve the removal of dust from the surface of the workpiece, the jigsaw has been equipped with a blow-off and dust removal system. A parallel guide is included.
The Energy+ 18 V 58GE111 Cordless Brushless Screwdriver by GRAPHITE is a cordless Energy+ functioning screwdriver with a brushless motor. It comes with a recommended 4 Ah battery capacity, where the run time of a 2 Ah battery is approximately 43 minutes. The screwdriver reaches 4400 rpm and has a maximum torque of 7 Nm. Equipped with a ¼" HEX chuck and screwdriving depth adjustment, it influences the comfort of the task at hand. The tool has an illumination function and a continuous operation switch. The practical belt clip allows you to always have the screwdriver with you. The GRAPHITE tool is dedicated to drywall, renovation and construction work.
The Energy+ 18V GRAPHITE cordless fan has both battery and mains power options. The air speed is controlled by two gears: I max 2573 rpm, II 1max 635 rpm. The device has a built-in on/off switch. The fan is compatible with Energy+ batteries. The device can operate in a standing or hanging position. The fan is equipped with an angle adjustment function.The Energy+ 18V GRAPHITE battery-network fan has both battery and mains power options. The air speed is regulated by two gears. The device has a built-in on/off switch. The fan is compatible with Energy+ batteries. The device can operate in a standing or hanging position. The fan has an angle adjustment function.
The Energy+ 18V GRAPHITE 58G027 Brushless Cordless Hammer Drill is a lightweight and compact cordless power tool with an SDS Plus chuck for both air impact and non-impact drilling. An excellent tool for light repair and construction work. The design of the hammer drill is compact, close to a drill/driver and lightweight. Product features: brushless motor; rubberized handle; workplace lighting; 4-function: drilling, drilling with impact, chisel indexing. Technical data: battery voltage 18V; speed: 0-1420 rpm; impact frequency: 0-4500 rpm; impact energy 2.2J; SDS Plus chuck; drilling diameter in wood/steel/concrete: 28/13/22 mm
The 3-in-1 Energy+ 18V grass trimmer without battery 58GE119 by GRAPHITE is a tool designed to groom shrubs, hedges and correct lawn edges. It works with the Energy+ system and operates with an 18V lithium-ion battery (recommended capacity is 4 Ah). The tool is offered with three attachments - a grass trimmer, a hedge trimmer and a trident. The handle has a 3/8" attachment. The cutting width for the trimmer is 100mm, for the shears (with a blade length of 200mm) it is 70mm and the trident is 75mm. The trimmer is characterised by easy tip changes. The built-in on/off switch lock ensures safety and the soft grip contributes to the comfort of use. The operating time on the 2 Ah battery is 1 hour 55 minutes. The GRAPHITE brand trimmer is a tool for every garden and allotment.
Energy+ 18 V 58G138 tile cutter by GRAPHITE that functions with the Energy+ battery system. The device reaches a no-load speed of 5,000 revolutions per minute. Recommended 18V lithium-ion batteries with a capacity of 2 Ah (23 minutes of work), 4 Ah (45 minutes of work) and 6 Ah (65 minutes of work). The cutter is equipped with a 110 x 7 x 22.2 mm diamond blade. The maximum cutting depth is 24 mm (at 90 degrees) and 16 mm (at 45 degrees). The built-in water tank ensures that no dust cloud is generated during cutting as with a normal angle grinder. The cutter ensures precision when working. Its compact dimensions (work surface - 370x390x112 mm) and low weight make it easy to transport. Made of ABS material. The set also offers a longitudinal guide, angle gauge with protractor, blade guard and spanners (2 pieces). Recommended for professionals and advanced DIY enthusiasts.
Energy+ 18V GRAPHITE brushless circular saw is a powerful power tool with a 165mm outside diameter blade for cutting wood and other wood-based materials. The saw comes with a parallel guide for precise rip cuts. The saw is easy and convenient to use. Adjustment of both the angle and depth of cut is done without tools, and special scales help in setting the parameters. Product features: brushless motor, aluminium base, laser pointer, adjustable cutting depth, adjustable cutting angle, rubber-coated handle, connection for dust extraction. Technical data: battery voltage 18 V, speed 0-4200 rpm, bevel cutting range 0° ÷ 45°, blade 165 x 20 mm, cutting thickness: at a right angle - 52 mm, at an angle of 45° - 35 mm.
GRAPHITE SDS+ rotary hammer drill, compatible with 18V Li-Ion GRAPHITE Energy+ batteries. It has 2 functions: drilling and drilling with electro-pneumatic impact. The design of the hammer drill is characterized by a low weight and compact shape, which is close to the dimensions of impact drill. The power tool provides 0.8J impact energy, which allows drilling even in harder building materials. The impact rate is 0-5000 min⁻¹ and the rotational speed is 0-900 min⁻¹. The maximum drilling diameter in concrete is 10 mm, in steel 8 mm, in wood 16 mm. The hammer drill has the possibility of gradual speed adjustment by means of the switch button and it is equipped with the switch for changing the direction of spindle rotation. The workplace is illuminated with a LED diode. The hammer drill has a "click" function for quick attachment of the drill bit. The main handle is covered with a non-slip cover, thanks to which the power tool rests firmly in your hand.
Energy + glue gun for 11 mm diameter adhesive cartridges. Used for gluing materials such as: paper, leather, textiles, cardboard, plastics, wood, metal, cork, stone. Handy housing resistant to heat. Tip for precise application of glue. Perfect for DIY workshop. Includes 3 adhesive cartridges. Product characteristics: rubber handle, head protection against burns during operation, gun warm-up time is only 3 minutes, compatible with universal adhesive cartridges with a diameter of 11 mm. Specifications: voltage 18V, adhesive insert diameter 11 mm, heating element temperature 160 ° C-210 ° C, heating time: 3 min, capacity: 8g / min, weight: 0.4 kg.
