Metal drills GRAPHITE (ref. no. 57H020-10) with diameters 3.0 mm are made of high quality M35 HSS alloy with 5% cobalt additive. 135° point angle and chisel edge correction allow for easy drilling without punching. Thanks to alloy resistance to high temperature, the drills are perfect for drilling holes in hardly machinable materials, like stainless steel, acid resistant steel, heat resistant steel etc.
Metal drills GRAPHITE (ref. no. 57H062-5) with diameters 12.0 mm are made of high quality M35 HSS alloy with 5% cobalt additive. 135° point angle and chisel edge correction allow for easy drilling without punching. Thanks to alloy resistance to high temperature, the drills are perfect for drilling holes in hardly machinable materials, like stainless steel, acid resistant steel, heat resistant steel etc.
Masonry drill VERTO (ref. no. 60H625) with SDS+ shank 12.0 mm diameter, tip with fine grit sintered carbide allows to efficiently drill holes in concrete. Double S4 flute ensures proper drillings extraction and protects the drill against overheating. VERTO brand offers power tool and accessories assortment for all DIY enthusiasts.
Fibra sanding disc GRAPHITE (ref. no. 55H858) with outer diameter 125 mm and granulation 100. Dedicated to grinding metal, steel, plastic, wood and even finishing putty. Ideally suited for deburring, removing rust and processing of welds. The disc with close coating. 100% of the disc surface is covered with abrasive grain (alumina), which guarantees greater processing accuracy and increased working efficiency. The disc is mounted to an angle grinder using a dedicated flexible disc. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Blades for reciprocating saw HCS/BIM GRAPHITE It is used in renovation, construction and demolition works as well as in home amateur work. Set of 10 saw blades for cutting construction wood, wet wood, firewood, with nails / metal, chipboard and MDF, plywood, plastic and sheet metal, profiles and small pipes. Enables fast and precise straight and curved / plunge cuts.
GRAPHITE metal drill with 2.5 mm diameter is made of high quality alloy of high speed steel. 124° point angle and chisel edge correction allow for easy drilling without punching. Designed for fast and efficient drilling in steel workpieces.
GRAPHITE metal drill with 13.0 mm diameter is made of high quality alloy of high speed steel. 124° point angle and chisel edge correction allow for easy drilling without punching. Designed for fast and efficient drilling in steel workpieces.
Water abrasive paper GRAPHITE (ref. no. 55H903) in a sheet with dimensions 230 x 280 mm and granulation 240. Designed mainly for wet varnish and plastic grinding applications in automotive industry as well as wood and metal processing. The abrasive paper’s backing is a very flexible latex paper which perfectly adapts to the workpiece. Close coating (100% of the paper surface is covered with abrasive grain) guarantees increased durability and processing accuracy. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Water abrasive paper GRAPHITE (ref. no. 55H911) in a sheet with dimensions 230 x 280 mm and granulation 2500. Designed mainly for wet varnish and plastic grinding applications in automotive industry as well as wood and metal processing. The abrasive paper’s backing is a very flexible latex paper which perfectly adapts to the workpiece. Close coating (100% of the paper surface is covered with abrasive grain) guarantees increased durability and processing accuracy. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Metal drills VERTO (ref. no. 60H090.) with 10.0 mm diameter is made of high speed steel in deep grinding technology. 135° point angle and chisel edge correction allow for easy drilling without punching. Perfect for drilling in steel, wood and plastics. VERTO brand offers power tool and accessories assortment for all DIY enthusiasts.
GRAPHITE metal drill with 3.8 mm diameter is made of high quality alloy of high speed steel. 124° point angle and chisel edge correction allow for easy drilling without punching. Designed for fast and efficient drilling in steel workpieces.
The GRAPHITE Widia saw blade (ref. 55H694) has an outside diameter of 235 mm and is made from C50 special steel with increased resistance to abrasion and deformation. Tungsten carbide teeth with ATB (alternate) geometry for accurate cutting of wood and wood based materials such as plywood, chipboard, MDF. The included reduction rings allow the blade to be used with most saw models. The GRAPHITE brand offers a wide range of power tools to meet the needs of professionals.
VERTO bimetal hole cutter diameter 35 mm with progressive teeth made of high speed steel allows for efficient cutting of precise holes in steel, stainless steel, wood, plastics and composite materials. VERTO brand offers power tool and accessories assortment for all DIY enthusiasts.
Masonry drills VERTO (ref. no. 60H302), 8 pcs set sized 4–10 mm, tipped with fine grit sintered carbide and enhanced resistance to high temperature. Grinded drill flute reduces drilling forces. VERTO brand offers power tool and accessories assortment for all DIY enthusiasts.
A set of HSS-CNC twist dril GRAPHITE (Ref. 55H089) with diameters ranging from 1.0 to 10.0 mm, made of high-alloy high speed steel using CNC machining. Ideally suited for drilling precise holes in all types of metals.
Sanding paper GRAPHITE (ref. no. 55H884) in a sheet with dimensions 230 x 280 mm and granulation 36. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive paper with C-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (alumina)) guarantees greater working efficiency and reduces the risk of clogging. The product designed to be used with orbital grinders, trowels and sanding blocks. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
The Hex 8.0 mm metal drill bit 54T715 by GRAPHITE is an accessory with Hex mounting, characterised by an overall length of 117 mm and a working length of 75 mm. It is DIN 338 compliant, with a 118 degree tip angle for comfortable working. The GRAPHITE brand drill bit is designed for working with metal. It will prove itself in amateur applications.
Rutile electrodes 2,5 mm, 5 kg, low voltage 56-825 by NEO TOOLS are electrodes with a diameter of 2,5 mm and a length of 350 mm. Designed for MMA welding; available in a 5 kg pack.
The Hex 9.0 mm metal drill bit 54T717 by GRAPHITE is an accessory with Hex mounting, characterised by an overall length of 125 mm and a working length of 81 mm. It is DIN 338 compliant, with a 118 degree tip angle for comfortable working. The GRAPHITE brand drill bit is designed for working with metal. It will prove itself in amateur applications.
