With a height of 51 mm, GRAPHITE's 24 mm bi-metal hole saw 56T704 allows drilling to a depth of 38 mm. It is made from HSS high speed steel and is fitted with a 1/2'' x 20 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T753 adapter with pilot drill bit for bi-metal hole saws in the 14-30 mm range. Maximum speeds for this tool, vary depending on the material: steel - 370 rpm, Inox steel - 185 rpm, aluminium - 555 rpm, wood - 500 rpm, cast iron - 245 rpm, brass - 495 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.
The 125 mm diameter GRAPHITE wire wheel brush, crimped steel wire, M14, 57T409 by GRAPHITE is made of crimped steel wire. Equipped with an M14 thread, it is designed for use with angle grinders. The maximum speed of the tool is 12500 rpm. The product complies with the EN 1083-2 standard and is well suited for working on metal surfaces, cleaning, removing rust, paint or dirt.
GRAPHITE's SDS Plus double helix concrete drill bit 16 x 1000 mm 56T145 is a concrete, brick and stone drill bit with a double helix and SDS Plus chuck. It features a diameter of 16 mm and an overall length of 1000 mm and a working length of 800 mm. It will prove useful for many tasks around the home and in the workshop.
Saw blade, widia, 160 x 30 mm, 48 teeth 57T212 by GRAPHITE, with an external diameter of 160 mm and a mounting hole diameter of 30 mm. It has 48 teeth, the cut width is 2 mm and the tooth angle is 15°. The maximum speed is 11,000 rpm. It is characterised by a fast cutting type. The blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.
GRAPHITE's 10 x 200 mm 56T210 concrete drill bit with cylindrical shank, has a diameter of 10 mm, an overall length of 200 mm and a working length of 120 mm. Recommended for concrete, brick and stone applications.
The 79 mm bi-metal hole saw 56T718 by GRAPHITE, with a height of 44 mm, allows drilling to a depth of 38 mm. It is made from HSS high speed steel and is fitted with a 5/8'' x 18 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T754 adapter with pilot drill bit for bi-metal holesaws in the 32-152 mm range. Maximum speeds for this tool, vary depending on the material: steel - 110 rpm, Inox steel - 55 rpm, aluminium - 165 rpm, wood - 150 rpm, cast iron - 70 rpm, brass - 140 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.
Jigsaw blade, 6 TPI, HCS, T-type handle, 2 pieces, coarse cutting 57T545 by GRAPHITE is a jigsaw tool with 6 TPI tooth density. Made from HCS, it has a T type handle. Comes in a 2 piece set. The GRAPHITE brand blade has an overall length of 100 mm, a working length of 74 mm, a width of 8 mm, a thickness of 1.2 mm and a tooth spacing of 4 mm. It is characterised by its wide application for working with softwood (5-50 mm), chipboard, carpentry plywood and fibreboard. Designed for fast and rough cutting.
GRAPHITE's 15mm 56T600 widia cutter is designed for drilling holes in wood, furniture boards and plastics. The carbide-tipped (TCT) blades provide durability and a precise finish. The design of the tool allows for flat-bottomed holes and the self-centring tip allows for accurate positioning in the material. The GRAPHITE cutter has central and external cutting blades, an overall length of 85mm and a cylindrical shank.
HSS metal drill bits, 2 - 8 mm, set of 13 pieces, 54T935 by GRAPHITE are metal drill bits characterised by diameters 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8 mm. They are made of HSS high speed steel. They have a cylindrical shank and a 118° drill point angle. They comply with DIN 338 and are suitable for every DIY enthusiast.
GRAPHITE's sanding canvas in roll 2.5 m x 115 mm, P40, 58T440 is an accessory for sanding metal, wood, plastic and plasterboard. The product is made on the basis of J-type canvas, which is characterised by high flexibility and durability. The abrasive has a solid blank - 100% of the surface is covered with abrasive grain (electrocorundum), ensuring effective sanding. GRAPHITE brand canvas is designed for hand sanding.
Sanding cloth 230 x 280 mm, P180, 58T349 by GRAPHITE is an accessory with full grain electro-corundum and flexible JF backing. It has 100% coverage and contains a synthetic resin bond. It will work well with plasterboard, wood, metal and plastics. GRAPHITE brand sanding canvas is recommended for smoothing coatings.
Water sandpaper 230 x 280 mm, P1800, 58T228 by GRAPHITE is a water-based hand sanding paper. It has a full grain electro-corundum coating, 100% coverage and a flexible C latex backing. It is suitable for wood, metal, paint, plastic, glass and plasterboard. This type of GRAPHITE brand sandpaper has been developed for use with water. Its special surface is coated with an abrasive layer which forms an abrasive paste on contact with the liquid. It makes the sanding process more efficient. The water also prevents the accumulation of dust, keeping the surface clean and increasing the efficiency of sanding. Working with wet sandpaper also minimises the risk of damage to the surface. The GRAPHITE brand is recommended for DIY enthusiasts.
Velcro sanding discs 125 mm, P36, 5 pieces, unperforated 58T179 by GRAPHITE are unperforated discs for metal, wood and plastic. Gradation P36 - the sharpest - allows appropriate sanding, according to the needs and the stage of surface preparation. The backing is made of type C paper and is suitable for machine use. The electro-corundum abrasive coating ensures high efficiency, and the Velcro attachment allows GRAPHITE discs to be changed quickly and conveniently.
The SDS Plus Double Spiral Concrete Drill 12 x 310 mm 56T127 by GRAPHITE is a concrete, brick and stone drill bit with a double spiral and SDS Plus chuck. It features a diameter of 12 mm and an overall length of 310 mm and a working length of 230 mm. It will prove useful for many tasks around the home and in the workshop.
GRAPHITE's 12 x 200 mm 56T213 concrete drill bit with cylindrical shank, has a diameter of 12 mm, an overall length of 200 mm and a working length of 120 mm. Recommended for concrete, brick and stone applications.
Wire wheel brushes, crimped wire, brass-plated, 25, 38, 50, 63, 75 mm, 5 pieces with shanks 3 pieces, 6 mm, 57T403 by GRAPHITE made of crimped brass-plated wire. They have a maximum speed of 4,500 rpm. The products comply with EN 1083-2 and the set includes 5 disc wire brushes with diameters: 25, 38, 50, 63 and 75 mm and 3 6 mm arbors. The mount is suitable for use with drills and drill/drivers. GRAPHITE wire wheel brushes are a versatile product for many tasks.
GRAPHITE's SDS Plus Double Spiral Concrete Drill 25 x 260 mm 56T162 is a concrete, brick and stone drill bit with a double spiral and SDS Plus chuck. It features a diameter of 25mm and an overall length of 260mm and a working length of 182mm. It will prove useful for many tasks around the home and in the workshop.
GRAPHITE's 57T502 plunge-cutting, BIM Co 8%, 33 mm blade 57T502 is a tool for multifunction machines with a blade width of 33 mm. It is made from bi-metal (BIM) with 8% cobalt (Co8%). The GRAPHITE blade is designed for plunge cutting wood, wood with nails, metal, plastic and plasterboard. It has a tooth pitch of 1.4mm, 18 TPI, a maximum cutting depth of 40mm and a blade thickness of 0.8mm. Recommended for precision work in a wide variety of materials.
Jigsaw blade, 10 TPI, HCS, T-handle, 2 pieces, reverse tooth, clean cut 57T542 by GRAPHITE is a 10 TPI tooth density jigsaw blade, made of HCS and fitted with a T-handle. The set includes 2 pieces. It has an overall length of 100 mm, a working length of 74 mm, a width of 8 mm, a thickness of 1.5 mm and a tooth spacing of 2.5 mm. Suitable for cutting softwood, chipboard, carpenter's plywood, fibreboard 3-30 mm thick and laminated panels. The GRAPHITE brand blade has an inverted tooth for a clean cut.
Sanding paper yellow 230 x 280 mm, P60, 58T201 by GRAPHITE is a product designed for sanding surfaces such as wood and plasterboard. Made on a D-paper base, it is characterised by high durability and resistance to tearing. Thanks to its open-cut coating, in which the surface is covered with 100% electro-corundum abrasive grain, GRAPHITE paper offers greater resistance to sanding dust clogging. It can be used for both hand and machine sanding - including with orbital sanders and plaster sanding trowels.
