The flap wheel 30 × 15 × 6 mm, P80, 58T402 by GRAPHITE has dimensions of 30 × 15 × 6 mm and gradation P80. It is designed for universal use, especially for machining hard-to-reach areas. The grain is made of electro-corundum and the bond is synthetic resin. The maximum speed recommended for this GRAPHITE brand grinding wheel is 22,000 rpm and the working speed is 35 m/s.
Grinding disc GRAPHITE (ref. no. 55H762) with granulation K80, diameter 80 mm, width 30 mm, for sanding wooden, metal and plastic surfaces. Made of durable, flexible leaves made of abrasive cloth, thanks to which it perfectly adapts to the surface. Product with X-cloth backing designed for mechanical grinding. Close coating (100% of the paper is covered with abrasive grain) guarantees increased durability and processing accuracy. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Flap wheel 80 x 30 x 6 mm, P60, 58T383 by GRAPHITE has dimensions of 80 × 30 × 6 mm and gradation P60. It is designed for universal use, especially for machining hard-to-reach areas. The grain is made of electro-corundum and the bond is synthetic resin. The maximum speed recommended for this GRAPHITE brand grinding wheel is 8000 rpm and the working speed is 35 m/s.
The 100 Nm Energy+ 04-616 drill/driver with impact by NEO features a brushless motor and impact. It operates on the Energy+ battery system and is compatible with lithium-ion batteries. The recommended battery capacity is 4 Ah. The tool features a torque of 100 Nm and an impact frequency of 7680 in 1st gear and 30400 in 2nd gear, with a maximum of 480 revolutions per minute (1st gear) and 1900 revolutions per minute (2nd gear). Equipped with a robust metal head and a 13mm quick-clamp drill chuck. The drill/driver has an illumination and a comfortable, rubberised handle. An additional handle helps with the tool. The weight of the device is just 1.53 kg. It is a product from the NEO brand recommended for professionals and DIY enthusiasts.
The flap wheel 30 x 15 x 6 mm, P100, 58T403 by GRAPHITE has dimensions of 30 × 15 × 6 mm and gradation P100. It is designed for universal use, especially for machining hard-to-reach areas. The grain is made of electro-corundum and the bond is synthetic resin. The maximum speed recommended for this GRAPHITE brand grinding wheel is 22,000 rpm and the working speed is 35 m/s.
Zirconia flap wheel 115 × 22.2 mm, P60, 58T106 by GRAPHITE has dimensions of 115 × 22.2 mm and gradation P60. The maximum speed is 13 300 rpm and the working speed is 80 m/s. The leaves are arranged in a fan pattern and made of zirconia grit. It is designed for grinding ordinary, stainless, stainless and acid-resistant steels. The backing is X-grain cloth for machine grinding. The coating is solid and covers 100% of the surface with abrasive grain. The GRAPHITE grinding wheel is recommended for many applications.
Grinding disc GRAPHITE (ref. no. 55H984) with diameter 115 mm and granulation K100, used for efficient polishing of metal and wood surfaces with use of angle grinders. Radial arrangement of abrasive cloth flaps allows to obtain efficiency that is many times greater than in other abrasive tools. Product with C-cloth backing designed for mechanical grinding. Close coating (100% of the paper surface is covered with abrasive grain) guarantees increased durability and processing accuracy. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
The 30 x 25 x 6 mm, P60, 58T411 flap wheel by GRAPHITE is a 30 mm diameter, 25 mm high, 6 mm shank and P60 gradation accessory for use with drills and straight grinders. The GRAPHITE grinding wheel has a maximum speed of 22,000 rpm and a linear speed of 35 m/s. The tool enables grinding of external and internal surfaces and hard-to-reach areas. The GRAPHITE brand grinding wheel adapts to the shape of the workpiece.
Zirconia flap wheel 125 x 22.2 mm, P100, 58T103 by GRAPHITE has dimensions of 125 × 22.2 mm and gradation P100. The maximum speed is 12 250 rpm and the working speed is 80 m/s. The leaves are arranged in a fan pattern and made of zirconia grit. It is designed for grinding ordinary, stainless, stainless and acid-resistant steels. The backing is X-grain cloth for machine grinding. The coating is solid and covers 100% of the surface with abrasive grain. The GRAPHITE grinding wheel is recommended for many applications.
Flap wheel 125 x 22.2 mm, P60, zirconia 57-842 by NEO TOOLS is a 125 mm diameter, P60 gradation accessory with a 22.2 mm mounting hole, designed for grinding metal - including stainless steel and acid-resistant steel (INOX). The fan-shaped, radial flap arrangement with full grit (100% zirconia grain coverage) on an X-type cloth base ensures a high stock removal rate and stable guidance in machine work. The zirconia grain has a self-sharpening effect, thus extending the life of the tool in intensive work. The maximum speed is 12,250 rpm and the permissible linear speed is 80 m/s.
Grinding disc GRAPHITE (ref. no. 55H985) with diameter 115 mm and granulation K120, used for efficient polishing of metal and wood surfaces with use of angle grinders. Radial arrangement of abrasive cloth flaps allows to obtain efficiency that is many times greater than in other abrasive tools. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
GRAPHITE flap disc is used for efficient polishing of metal and wood surfaces with use of angle grinders. Radial arrangement of abrasive cloth flaps allows to obtain efficiency that is many times greater than in other abrasive tools.
Grinding disc GRAPHITE (ref. no. 55H759) with granulation K80, diameter 60 mm, width 30 mm, for sanding wooden, metal and plastic surfaces. Made of durable, flexible leaves made of abrasive cloth, thanks to which it perfectly adapts to the surface. Product with X-cloth backing designed for mechanical grinding. Close coating (100% of the surface is covered with abrasive grain) guarantees increased durability and processing accuracy. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
The 125 x 22.2 mm, P120, 58T124 flap wheel by GRAPHITE measures 125 × 22.2 mm and has a gradation of P120. The maximum speed is 12 250 rpm and the working speed is 80 m/s. The flaps are arranged in a fan-shaped pattern and made of electro-corundum grit. It is designed for grinding steel and wooden surfaces with angle grinders. The backing is X-grain cloth for machine sanding. The coating is solid and covers 100% of the surface with abrasive grain. The GRAPHITE grinding wheel is recommended for many applications.
The 50 × 20 × 6 mm, P40, 58T399 flap wheel by GRAPHITE has dimensions of 50 × 20 × 6 mm and gradation P40. It is designed for universal use, especially for machining hard-to-reach areas. The grain is made of electro-corundum and the bond is synthetic resin. The maximum speed recommended for this GRAPHITE brand grinding wheel is 13,000 rpm and the working speed is 35 m/s.
Flap wheel 30 x 10 x 6 mm, P40, 58T398 by GRAPHITE has dimensions of 30 × 10 × 6 mm and gradation P40. It is designed for universal use, especially for machining hard-to-reach areas. The grain is made of electro-corundum and the bond is synthetic resin. The maximum speed recommended for this GRAPHITE brand grinding wheel is 22,000 rpm and the working speed is 35 m/s.
Grinding disc GRAPHITE (ref. no. 55H991) with diameter 125 mm and granulation K120, used for efficient polishing of metal and wood surfaces with use of angle grinders. Radial arrangement of abrasive cloth flaps allows to obtain efficiency that is many times greater than in other abrasive tools. Product with C-cloth backing designed for mechanical grinding. Close coating (100% of the paper surface is covered with abrasive grain) guarantees increased durability and processing accuracy. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Zirconia flap wheel 125 × 22.2 mm, P80, 58T102 by GRAPHITE has dimensions of 125 × 22.2 mm and gradation P80. The maximum speed is 12 250 rpm and the working speed is 80 m/s. The leaves are arranged in a fan pattern and made of zirconia grit. It is designed for grinding ordinary, stainless, stainless and acid-resistant steels. The backing is X-grain cloth for machine grinding. The coating is solid and covers 100% of the surface with abrasive grain. The GRAPHITE grinding wheel is recommended for many applications.
The 60 × 15 × 6 mm, P80, 58T389 flap wheel by GRAPHITE has dimensions of 60 × 15 × 6 mm and a gradation of P80. It is designed for universal use, especially for machining hard-to-reach areas. The grain is made of electro-corundum and the bond is synthetic resin. The maximum speed recommended for this GRAPHITE brand grinding wheel is 11,000 rpm and the working speed is 35 m/s.
Flap wheel 80 × 30 × 6 mm, P120, 58T386 by GRAPHITE has dimensions of 80 × 30 × 6 mm and gradation P120. It is designed for universal use, especially for machining hard-to-reach areas. The grain is made of electro-corundum and the bond is synthetic resin. The maximum speed recommended for this GRAPHITE brand grinding wheel is 8000 rpm and the working speed is 35 m/s.
