Terasplekist riiul on tugev ja praktiline hoiulahendus, mis aitab töökoha paremini organiseerida. Riiul pakub mugavat hoiuruumi tööriistadele, tarvikutele, kinnituselementidele ning muudele igapäevaselt kasutatavatele töövahenditele. Vastupidav teraskonstruktsioon tagab pika kasutusea ning aitab tööpinna vabana hoida, parandades töö efektiivsust ja korrastatust.
Multifunctional device/polisher 4 V, 04-604 by NEO TOOLS is a multitasking tool that will prove useful in various applications. Thanks to its handy design and small dimensions, it fits perfectly in the hand. It is characterised by a voltage of 4 V and a battery capacity of 2000 mAh. Charging takes place via the USB C connector - the cable (without charger) is part of the kit. The NEO TOOLS multifunction tool offers a run time of up to 45 minutes and a no-load speed of up to 1,800 min-1. This tool also has a wide range of accessories. The set includes a 5 cm diameter brush, a velcro pad, a scraper to remove ice from the glass, 2 fibres of high and medium hardness, a polishing sponge, as well as 6 pieces of sandpaper - 2 pieces of each gradation: 120, 240 and 600. With its rubberised handle and charge indicator, this is a multifunctional and durable device from NEO TOOLS that can be successfully used for polishing, smoothing, sanding, refreshing surfaces or removing ice from glass. Recommended for decorators, DIY enthusiasts or car fans.
The 1020 W, 950 Nm impact spanner 04-720 by NEO is a 1020 W tool for workshop work involving tightening and removing screws. It will prove useful in professional vulcanisation workshops, during the tasks of a roofer, mechanic, builder or carpenter. It will also be invaluable for domestic use. The spanner reaches a speed of 2,600 rev/min, characterised by a maximum torque to the left: 950 Nm and clockwise: 700 Nm. It is equipped with a ½" handle and is suitable for the most common type of impact sockets. The set offers 4 sockets in sizes 17,19,21,22 millimetres. The ergonomic shape of the spanner allows you to work effectively in all conditions. Due to being electrically powered, it does not require a pneumatic system. It has a 6 m cable. Thanks to its versatility, the NEO brand spanner is an excellent addition to workshops.
The SDS+ 900 W, 3.5J, case 04-723 hammer drill from NEO is a 900 W specialist SDS+ tool with drilling and impact drilling functions. It allows you to drill holes up to 28mm in diameter in concrete and brick, 13mm in steel and 30mm in wood. The tool features spindle reversing, gradual speed control and an on/off switch lock for continuous operation. While drilling, the hammer drill reaches up to 1200 revolutions per minute, and up to 5,000 strokes per minute when switched to percussion (the percussion function is activated when the drill bit is pressed against the drilled surface). The impact energy of the tool is 3.5 J. The convenient "click" function is designed for fast attachment of the drill bit. The tool's comfortable main handle is covered with a non-slip grip, so it lies well in the hand. Equipped with a vibration-damping system. Additional drill bits, drill chuck, chuck adapter, drilling depth stop bar, rotating auxiliary handle, lubricant reservoir and carrying case are included. The unit is equipped with a flexible and durable 3m power cable, also dedicated to professional and industrial applications, both indoors and outdoors. Compliance with European standards is ensured by CE certification.
The Energy+ 18V cordless mini sander without battery 58GE107 by GRAPHITE is a tool designed for a variety of precision finishing work: sanding, cutting, engraving, derusting, routing - even in hard-to-reach areas. It functions on the basis of the Energy+ rechargeable system and an 18V lithium-ion battery. Operating time on the 2Ah battery is 49 minutes. The recommended battery is 4Ah. The tool has variable speed control (5000 - 33000/min). It has an accessory slot, shock-absorbing rubber pads to stabilise the tool and a non-slip handle. The spindle diameter of the mini sander and the diameter of the handle is 3.2mm. The flexible shaft is 1 m long. The set comes with 40 accessories: 5x cutting disc, 10x pieces of sandpaper, 3x sanding disc with 3.2 mm chuck, 2x sanding shank, 6x sanding band, 1x drill bit, 3x diamond drill bits 3.2 mm, 2x mandrel 3.2 mm, 4x felt wheel, 1x steel wire brush 3.2 mm, 1x spanner, 1x polishing compound, 1x Hss cutter 3.2 mm. This is the perfect GRAPHITE brand tool for DIY tasks.
Polishing machine 900 W, 150 mm, speed 600-3000, 04-701 NEO TOOLS is a 900 W machine with a speed of 600 to 3000 revolutions per minute. It features a maximum pad diameter of 150 mm and an M14 spindle. It is offered with a medium sponge, pad and additional handle. With a 6-metre power cable, it allows freedom of movement while working. It is IPX0 rated. The NEO TOOLS polisher has 6 stages of adjustment and is offered in a cardboard box. For automotive enthusiasts.
