Electromagnetic clamping plate for fixing the workpiece including automatic demagnetization function
Automatic central lubrication for all slides and spindles
Hand scraped and Turcite-B-coated V-flat guides guarantee extremely uniform, low-friction movement and highest precision
Halogen working light dustproof, completely contact-proof and protected against jet water according to IP65
Second grinding wheel flange included in delivery
Automatic feed control AD 5 The fsM series models are equipped with automatic feed control (AD 5). Different grinding cycles are available: surface loops with delivery at the starting point, groove loops with delivery at the starting point, groove loops with delivery at the start and end points. The delivery of the grinding wheel can be individually designed depending on the workpiece. The total grinding size is divided into coarse and fine delivery, the delivery steps can be freely entered, depending on the application, with a minimum resolution of up to 0.001mm. The possibility to program dead runs after a certain number of delivery steps as well as passages for firing after reaching the grinding measure provides the best grinding results. Manufacturer Stürmer Maschinen GmbH Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany info@stuermer-maschinen.de
Punching station, flat steel shears, angle steel shears, sectional steel shears, available with notching station starting from HPS 45S
DS series with two working cylinders and two foot pedals for simultaneous use with punching station and sectional steel shears
Stepless adjustment of the stroke
Larger reach for punching station with 620 mm optional, available from HPS 55DS
Heavy and rigid welded construction
Standard with notching knife starting from HPS 45S
With powerful 400 Volt motor
V-notching knife, oversized punching device and larger throat depth for punching station available on request
Two-stage foot pedal for inching operation
Stamps and dies No. 1, No. 2, No. 3, No. 30, No. 45, No. 60 can be used with the standard delivery scope of the machine. Use of punch and die No. 4 and No. 80 optional (except HPS 40S)
Advantages of punching over drilling:
High time savings - cycle times
No chips
No cooling
Note:
All hydraulic sectional shears are delivered with oil
Quiet running spindle thanks to new spindle design
Machine operation with safety electrics in 24 V DC voltage
Guaranteed concentricity ≤ 0.02 mm measured in the drilling spindle
Right/left rotation
Precision spindle bore
Control panel with user-friendly, dirt and water resistant membrane keypad
Speed display
Separate emergency stop impact switch
Thread cutting function
Precisely machined, stable drilling table with diagonally running T-slots with circumferential cooling water channel, laterally tiltable by ±45° and 360° rotatable
Digital depth gauge
LED machine light integrated in drill head
V-belt cover with safety switch
Thick-walled steel column for high force absorption and stability
Electromagnetic clamping plate for fixing the workpiece including automatic demagnetization function
Automatic central lubrication for all slides and spindles
Hand scraped and Turcite-B-coated V-flat guides guarantee extremely uniform, low-friction movement and highest precision
Halogen working light dustproof, completely contact-proof and protected against jet water according to IP65
Second grinding wheel flange included in delivery
Automatic feed control AD 5 The fsM series models are equipped with automatic feed control (AD 5). Different grinding cycles are available: surface loops with delivery at the starting point, groove loops with delivery at the starting point, groove loops with delivery at the start and end points. The delivery of the grinding wheel can be individually designed depending on the workpiece. The total grinding size is divided into coarse and fine delivery, the delivery steps can be freely entered, depending on the application, with a minimum resolution of up to 0.001mm. The possibility to program dead runs after a certain number of delivery steps as well as passages for firing after reaching the grinding measure provides the best grinding results. Manufacturer Stürmer Maschinen GmbH Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany info@stuermer-maschinen.de
Punching station, flat steel shears, angle steel shears, sectional steel shears, available with notching station starting from HPS 45S
DS series with two working cylinders and two foot pedals for simultaneous use with punching station and sectional steel shears
Stepless adjustment of the stroke
Larger reach for punching station with 620 mm optional, available from HPS 55DS
Heavy and rigid welded construction
Standard with notching knife starting from HPS 45S
With powerful 400 Volt motor
V-notching knife, oversized punching device and larger throat depth for punching station available on request
Two-stage foot pedal for inching operation
Stamps and dies No. 1, No. 2, No. 3, No. 30, No. 45, No. 60 can be used with the standard delivery scope of the machine. Use of punch and die No. 4 and No. 80 optional (except HPS 40S)
Advantages of punching over drilling:
High time savings - cycle times
No chips
No cooling
Note:
All hydraulic sectional shears are delivered with oil
Semi-motor version - manual operation of the upper cheek, bending process motorised
Designed for professional use
With foot operation
heavy, compact weldment
With continuous sharp bending rail
Standard with manual adjustment of the bending angle by means of nonius ring
Particularly low-maintenance
S-models with segmented top tools
SH models with high, segmented goat foot tools
Hardening of standard tools available on request: sharp bending rail and bending strip hardened, segmented tools and bending strip hardened, segmented goat foot tools and bending strip hardened
Further swivel bending machines available on request
Quality Made in Europe Manufacturer Stürmer Maschinen GmbH Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany info@stuermer-maschinen.de
