Power tools, machinery

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Hardened and ground Z-axis guideway
• Precisely machined carriage
• DC 24 volt electrics
• Motor protection switch
• Main motor electrically braked
• Guaranteed concentricity of the spindle nose better than 0.015 mm
• Smooth-running feed gear with rounded gears running in an oil bath
• Hardened main spindle mounted in adjustable, precise tapered roller bearings
• Right/left rotation switchable on the bed slide
• Two-channel safety electronics
• Handwheels with adjustable fine scaling 0.04 / 0.02 mm
• Safety handwheels with disengagement function according to EN23125 in the X and Z axis
• Switch rod on the bed slide for selecting longitudinal or face feed
• Switch with life cycle calculation tested in accordance with EN ISO 13849
• Machine base in sturdy steel construction
• Quadruple steel holder
• Emergency stop switch right and left

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• The electronic measuring components of the measuring strips are protected and sealed in the housing
• Allows accurate and reliable measuring results even if the measuring system is installed in Öl or cooling liquids
• Tolerant against vibrations and magnetic interference
• Without mounting

Note: Adjustments may have to be made to the machine for mounting the measuring bars
Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• The electronic measuring components of the measuring strips are protected and sealed in the housing
• Allows accurate and reliable measuring results even if the measuring system is installed in Öl or cooling liquids
• Tolerant against vibrations and magnetic interference
• Without mounting

Note: Adjustments may have to be made to the machine for mounting the measuring bars
Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Dimensions L x W x H: 630 x 400 x 100 mm
• Acceptance 7 μ
• granite
• Thermally and dynamically stable
• Compressive strength 250 - 260 N / mm2
• DIN 876/0
• corrosion-free

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• The electronic measuring components of the measuring strips are protected and sealed in the housing
• Allows accurate and reliable measuring results even if the measuring system is installed in Öl or cooling liquids
• Tolerant against vibrations and magnetic interference
• Without mounting

Note: Adjustments may have to be made to the machine for mounting the measuring bars
Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Hardened and ground Z-axis Guideway
• Spindle mounting Camlock DIN ISO 702-2 No. 4
• Guaranteed concentricity of the spindle nose better than 0,015 mm
• Smooth-running feed gear with rounded gearwheels running in oil bath
• Emergency-stop pushbutton
• Hardened main spindle mounted in adjustable precision taper roller bearings
• Hand wheels on slide with adjustable fine scaling 0,04 / 0.01 mm
• Heavy ribbed prismatic bed made of grey cast iron, inductively hardened and precision ground
• Circular runout accuracy on lathe chuck better than 0,04 mm
• Quadruple steel holder
• All guides can be readjusted by V-guides
• Hardened spindle nose
• Lead spindle for thread cutting or automatic longitudinal turning
• Lead spindle and feed spindle mounted in two sintered bearings
• Automatic longitudinal / facing feeds
• Riding stock for taper turning ± 5 mm adjustable
• Riding stock sleeve and handwheel with adjustable fine scaling 0,02 mm
• Fast, easy and tool-free adjustment of the tailstock by means of clamping lever

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de