Power tools, machinery

• The electronic measuring components of the measuring strips are protected and sealed in the housing
• Allows accurate and reliable measuring results even if the measuring system is installed in Öl or cooling liquids
• Tolerant against vibrations and magnetic interference
• Without mounting

Note: Adjustments may have to be made to the machine for mounting the measuring bars
Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• The electronic measuring components of the measuring strips are protected and sealed in the housing
• Allows accurate and reliable measuring results even if the measuring system is installed in Öl or cooling liquids
• Tolerant against vibrations and magnetic interference
• Without mounting

Note: Adjustments may have to be made to the machine for mounting the measuring bars
Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• The electronic measuring components of the measuring strips are protected and sealed in the housing
• Allows accurate and reliable measuring results even if the measuring system is installed in Öl or cooling liquids
• Tolerant against vibrations and magnetic interference
• Without mounting

Note: Adjustments may have to be made to the machine for mounting the measuring bars
Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Machine bed made of heavily ribbed cast iron
• One-piece machine base made of steel
• High rigidity of the headstock housing thanks to heavily ribbed 25GG casting
• All gear wheels of the feed gear made of hardened steel
• Shafts on needle bearings, all components are lubricated in an oil bath
• Hardened and ground face spindle ensures enormous accuracy and durability
• High chip removal during roughing is no problem thanks to the high cutting capacity
• Service-friendly removable rear panel
• Energy chain for gentle cable and hose guidance
• Lockable chip guard moves with the bed slide with integrated position indicator and coolant hose, can be moved manually
• Decoupled handwheels tested in accordance with EN 23125
• Two-channel right/left switch tested in accordance with EN 23125
• No change wheels necessary
• Switch with life cycle calculation tested in accordance with EN ISO 13849
• With safety device to prevent simultaneous operation of tapping and feed mechanism
• Bed guides hardened and precision ground
• Electronically braked motor
• Electronic feed cut-off of the Z-axis
• All electronic controls can be reached centrally
• Complete illumination of the work area
• External coolant tank with level indicator and oil separator
• Complete lead and feed spindle cover
• Electric position stop with quadruple position stop
• Three-jaw lathe chuck included as standard
• Quick-change steel holder SWH 7-C
• 1 steel holder 32 x 130 type D for square chisel 25 mm
• Digital position indicator DPA 32-3

TX 5216

• Large spindle bore Ø 80 mm

TX 6222:

• Large spindle bore Ø 105 mm

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Radius / Diameter mode
• Parameter memory
• Inch / metric adjustment
• Multifunction LCD display
• Adjustable angle measurement
• Absolute / incremental
• 8-digit LCD display
• Coordinate conversion

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Hardened and ground Z-axis guideway
• Guaranteed concentricity of the spindle nose ≤ 0.015 mm
• Spindle holder Camlock DIN ISO 702-2 No. 8
• Two gear stages
• Spindle bore / bar passage Ø 105 mm
• Siemens Sinamics frequency inverter / Safety Integrated
• Lead screw cover
• Precisely machined slide
• All guides can be adjusted using wedge strips
• Right/left rotation on bed slide switchable via switching spindle
• Two-channel safety electronics
• Central lubrication in the bed slide
• Upper slide adjustment range ± 90
• Gear wheels smooth-running, hardened, ground and mounted with 2 adjustable precision tapered roller bearings
• Gear wheels and shafts hardened and ground, running in an oil bath in precision bearings
• Handwheels with adjustable fine scaling 0.04 / 0.02 mm
• Safety handwheels with disengagement function in accordance with EN23125 in the X and Z axes
• Clearly arranged selector lever for switching the feed speeds
• Closed design of the quick-change feed gearbox
• Switch with life cycle calculation, tested in accordance with EN ISO 13849
• Emergency stop impact switch, motor protection switch, lockable main switch
• Emergency stop device with foot actuation
• Tailstock for taper turning ± 10 mm adjustable
• Tailstock quill and handwheel with adjustable fine scaling 0.025 mm. Quick, easy and tool-free adjustment by means of clamping lever
• Heavily ribbed prism bed, induction hardened and precision ground from gray cast iron
• Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning in accordance with DIN
• LED machine lamp in the chip guard
• Energy chain for gentle cable and hose routing
• Adjustable scale on the thread gauge

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• The electronic measuring components of the measuring strips are protected and sealed in the housing
• Allows accurate and reliable measuring results even if the measuring system is installed in Öl or cooling liquids
• Tolerant against vibrations and magnetic interference
• Without mounting

Note: Adjustments may have to be made to the machine for mounting the measuring bars
Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• The electronic measuring components of the measuring strips are protected and sealed in the housing
• Allows accurate and reliable measuring results even if the measuring system is installed in Öl or cooling liquids
• Tolerant against vibrations and magnetic interference
• Without mounting

Note: Adjustments may have to be made to the machine for mounting the measuring bars
Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Solid design made from high-quality Meehanite cast iron
• High concentricity due to tapered roller bearing, ≤ 0.01 mm measured in the sleeve
• X- and Z-axis with adjustable 55° dovetail guide
• Y-axis with adjustable flat guide
• Coolant device
• Solid and generously dimensioned cross table, precisely surface-finished with adjustable end stops
• Drilling/milling head can be tilted ± 45
• Automatic quill feed, 3-stage 0.04 - 0.15 mm/rev
• Precision micro feed
• Adjustable drilling depth stop with millimeter scale, readable from the front
• Right/left rotation
• Infinitely variable speed control
• Milling spindle with precision bearing
• Mechanical spindle brake
• Height-adjustable protective screen with microswitch, against flying chips and parts, for maximum protection of the user

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Versatile range of applications
• Robust machine design
• Heavy, solid design made of high-quality Meehanite cast iron
• Smooth running due to ground gear wheels running in an oil bath
• All guides are hardened and can be adjusted using wedge strips
• Stable flatbed guides in the Y and Z axes
• Central lubrication
• Large decoupled handwheels with scale
• LED machine lamp
• Coolant device
• Simple operation of the switching elements
• Table feed X-, Y- and Z-axis
• Feed system adjustable in fixed steps by servo motor
• Massive and generously dimensioned cross table, precisely surface-finished with adjustable wedge bars and adjustable end stops
• Vertical and horizontal milling position
• Height-adjustable protective screen with microswitch to prevent flying chips and parts, for maximum user protection

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de