NEO earmuff protectors are designed to protect against moderate noise, but they allow for communication and hearing machine alarm signals. High comfort of use is possible thanks to exceptionally soft padding. Adjustable pressure spring and good profile allow for perfect fit to head without excessive pressure of earmuff protectors. CE mark is a safety warranty and proves that the product meets all European requirements.
NEO's 97-567 helmet ear muffs allow you to work with an industrial helmet and ear muffs at the same time. They are particularly useful in factories where both head and hearing protection are required. They are characterised by an SNR of 29 dB. They have a soft finish for increased wearing comfort. The adjustable height of the earmuffs and the ability to tilt and swivel the arms allow the wearer to work with the earmuffs attached, without having to detach them from the helmet in the event of a change in audibility. The product is compatible with all NEO TOOLS brand helmets. It is CE certified.
NEO anti-noise earmuffs (ref. 97-563) are designed for protection against considerable noise. The signal to noise ratio of the headphones is 30 dB. Insulation made of G-Tech foam, provides very good protection against intense noise. Thanks to cushioned headband and proper profiling, the earcups fit your head perfectly without pressing. CE marking is a guarantee of safety, it proves that the product meets all EU requirements.
The 3-in-1 chainsaw protection helmet, 97-395 by NEO TOOLS is a set designed to protect the head, face and hearing, during work carried out by chainsaws and grass cutters. The helmet, made of ABS plastic, is equipped with head circumference adjustment with a knob in the range of 51-63 cm, allowing to fit different users. Stability is provided by a 6-point harness and 2-point chin strap, while comfort is enhanced by a sweatband. The kit from the NEO TOOLS brand includes protective earmuffs with SNR = 30 dB attenuation with adjustable positioning and a wire mesh face shield - also adjustable. The weight of the entire set is only 760 g. The product is CE certified.
Silicone half-mask + 2x A1P2 absorber, 97-353 by NEO TOOLS is a set including silicone half-mask 97-350 by NEO TOOLS and two A1P2 absorbers, 97-363 by NEO TOOLS. It provides protection against gases and vapours of organic substances whose boiling point is higher than 65°C. Protects against dusts, fumes and mists. Captures vapours of alcohols, aldehydes, esters, ethers, ketones, organic acids and styrene - at a total concentration by volume not exceeding 0.1%. The most common applications for this NEO TOOLS kit are protection against aerosols in paints and varnishes, glutaraldehyde, acetic acid, pesticides, dimethyl sulphate, kitchen fumes, combustion engine fumes, etc. The kit is CE certified to EN140 and EN14387.
Silicone half-mask + 2x absorber A1, 97-352 by NEO TOOLS is a set including silicone half-mask 97-350 by NEO TOOLS and two absorbers A1, 97-360 by NEO TOOLS. Provides protection against gases and vapours of organic substances whose boiling point is higher than 65°C. Captures vapours of alcohols, aldehydes, esters, ethers, ketones, organic acids and styrene - at a total concentration by volume not exceeding 0.1%. The kit is CE certified to EN140 and EN14387.
Silicone half-mask + 2x P3 filter, 97-351 by NEO TOOLS is a set including silicone half-mask 97-350 by NEO TOOLS and two pieces of P3 filters, 97-361 by NEO TOOLS. It provides protection against aerosols containing solid particles (dusts), fumes and liquid mists, as long as the concentration of the dispersed phase of the aerosol does not exceed 20xNDS. The most common applications are mining, stonemasonry and carpentry work, as well as bulk handling or fertiliser operations. The kit is CE certified to En140 and EN143 standards.
TOPEX welding shield provides protection during welding works for all DIY enthusiasts. Main filter sized 100 x 80 mm with shading at the level of DIN 6–14. CE mark is a safety warranty and proves that the product meets all European requirements. TOPEX brand is oriented towards DIY enthusiasts.
NEO goggles are a basic protective article during most of work. They protect eyes against mechanical injuries. Made of polycarbonate. The lightweight construction provides comfort and high wearing comfort. The CE mark is a guarantee of safety, it proves that the product complies with all EU requirements.
Top Tools protective goggles (ref. no. 82S102) are used to protect eyes against solid splinters. They are designed to provide personal safety of the user. They can be used in environments where small particles of solid bodies can get into the eyes during chiselling, grinding, cutting etc.
TOPEX welding shield provides protection during welding works for all DIY enthusiasts. Main filter sized 100 x 50 mm with shading at the level of DIN 6–14. CE mark is a safety warranty and proves that the product meets all European requirements. TOPEX brand is oriented towards DIY enthusiasts.
Top Tools popular glasses (ref. no. 82S101) are used to protect eyes against solid splinters. They are designed to provide personal safety of the user. They can be used in environments where small particles of solid bodies can get into the eyes during chiselling, grinding, cutting etc.
NEO goggles protect eyes against mechanical injuries. Made of polycarbonate. Lightweight construction provides comfort and high level of use. The CE mark is a guarantee of safety, it proves that the product meets all EU requirements.
The safety glasses with foam insert, tinted lenses 97-522 by NEO are robust safety glasses belonging to optical class 1. They are characterised by resistance class FT, which guarantees resistance to high-speed particle impacts (up to 45 m/s) with low impact energy and protection against particles at extreme temperatures from -5°C to 55°C. NEO safety glasses have a UV filter of 5-4.1- offering protection against UV radiation. The tinted lenses are made of polycarbonate and the non-slip arms are made of rubber. The foam insert influences the better fit of the goggles to the face and wearing comfort. The safety glasses of the NEO brand are compliant with the CE EN166 certificate. They will be indispensable during various tasks where eye protection is crucial.
Industrial helmet for work at heights, white 97-211 by NEO is a helmet in white colour, dedicated to supervisors and site managers. The product with light weight of 430 g and Polish production, offers great strength during work at heights. Made of durable ABS plastic, it has 10 ventilation holes allowing air to flow freely inside the helmet.The helmet consists of a rotating truss, a solid helmet shell and a set of straps (chin strap attached in 4 points), load bearing strap (attached to the shell in 6 points) and a truss strap with a convenient adjustment mechanism, allowing you to change the parameters with an easy to use knob. The helmet also has a velour, exchangeable sweat pad. The product is characterised by a wide range of adjustment (from 51-63 cm). It can be used both in very low temperatures (-30°C) and in hot weather. The helmet is classified as protection class II. The resistance to lateral deformation and impact allows it to be used also in construction, industry and forestry. Excellent protection for workers in extreme conditions.
The certified orange NEO safety helmet (ref. 97-205) is made of HDPE material. It has a circumference adjustment of the main belt in the range from 55 to 65 cm, which allows you to fit the helmet to your head. The helmet is equipped with a 6-point harness and an anti-sweat band. The product weighs 322g. The helmet protects against injuries caused by falling objects such as stones, tiles, bricks and other similar objects. It is suitable for use at electrical installations - it protects from electric discharges from 1000V AC and 1500V DC (low-voltage installations).
Industrial helmet with chin strap, red 97-224 by NEO means assured head protection and comfort. The helmet is intended for workers at risk of injury. It is useful when working on scaffolding, in the warehouse and in excavation work. It has an adjustable circumference of 52-64 cm and is made of ABS material. Equipped with a 6-point harness and a 4-point chin strap, it protects against impact from objects such as stones, tiles, bricks or other items that could pose a potential hazard. The helmet can be used in a temperature range of -30°C/+50°C. The automatic circumferential adjustment by means of a knob streamlines the donning and fitting of the product. The ventilation holes and the sweatband offered in the kit contribute to the comfort of the helmet, even when performing tasks for many hours. It is CE certified.
The knee mat, EVA foam 97H200 by VERTO is characterised by its dimensions of 40 x 20 x 2 cm and weight of 95 g. It is made of light and comfortable EVA foam. It is recommended for garden tasks, assembly and during small repairs. Its purpose is to improve the comfort of work carried out on the knees. The mat has a cut-out handle for easy carrying. It can also be used as a seat. VERTO brand offers proven and durable products for many seasons of use.
NEO goggles are the basic article of protection in most works. They protect eyes against mechanical injuries. They are made of polycarbonate. Lightweight construction provides comfort and high usage. The CE mark for compliance with EN166 standard is a guarantee of safety, it proves that the product meets all EU requirements. Characteristics: optical class 1 - possibility of continuous work, mechanical resistance F - resistance to high speed particles impact (up to 45m/s) with low impact energy; application e.g. for manual metal processing, UV filter 2C-1,2- protection against UV radiation, better color recognition, shading grade 1,2.
Industrial helmet for work at heights, yellow 97-210 by NEO is a helmet in yellow colour, dedicated to manual workers. The product with light weight of 430 g and Polish production, offers high durability during works at heights. Made of durable ABS plastic, it contains 10 ventilation holes allowing air to flow freely inside the helmet. The helmet consists of a rotating harness, a solid helmet shell and a set of straps (chin strap attached in 4 points), carrying strap (attached to the shell in 6 points) and the harness strap with a comfortable adjustment mechanism, allowing to change the parameters with an easy to use knob. The helmet also has a velour, exchangeable sweat pad. The product has a wide range of adjustment (from 51-63 cm). It can be used both in very low temperatures (-30°C) and in hot weather. The helmet is classified as protection class II. Resistance to lateral deformation and impact allows it to be used also in construction, industry and forestry. Excellent protection for workers in extreme conditions.
