Workshop equipment and car accessories

• Thanks to patented technology, regular service is possible in only 30 seconds and without expensive cleaning
• Wall and floor mounting possible
• Works reliably with any steam trap
• Suitable for all common compressor oils
• Operating media: condensate (air, water, oil), non-aggressive, not suitable for emulsion
• Quick and clean change of the filter cartridge
• No settling tank necessary (no bacteria formation)
• Easy installation due to compact design and small dimensions
• Connection via quick couplings

• Multi-stage oil-water separation via an oil-attracting filter and activated carbon
• After the end of the service life of the filter element this is unscrewed and disposed of completely
• Filter element is tightly closed with plastic cover, so that residual condensate can remain in it
• Locked filter element can be disposed of according to current regulations

• after occurrence of one of the following three cases:
• 4,000 operating hours of the compressor at compressor oil transfer of 2.5 mg / m3
• Discoloration of the polypropylene medium - analysis by simple visual inspection
• At the latest after 12 months (regardless of the operating hours of the compressor)

• Ideal in combination with prefabricated solutions
• Permanently sealed without pressing
• Installation even in confined spaces
• Detachable fittings can be reused
• Cost savings through quick assembly

• Permanently sealed without pressing
• Cost savings through quick and easy assembly
• Ideal in combination with prefabricated solutions
• Compatible with other standards-compliant pipes
• No confusion of contours possible
• Installation even in confined spaces
• Extraction forces far beyond the requirements of the standard
• Pipe components can be dismantled and reused
• Numerous national and international approvals
• O-rings included

• Easy and simple installation
• Installation times can be reduced by up to 40%
• Suitable for copper and plastic pipes
• Ideal for tight installation conditions a flexible pipe system
• disassembly possible without damaging the pipe connector
• multiple loosening and plugging possible
• secure and tight connection without constant inspection

• Two-stage compression 2-cylinder high-performance unit with cast iron cylinder block
• The low speed ensures quiet, low-vibration operation and a long service life
• Large fan wheel for optimal cooling
• High quality electric motor with high torque
• Electric motor equipped with motor protection switch
• With phase inverter for easy manual reversal of the direction of rotation
• Intermediate and aftercooler reduces the formation of condensation
• Maintenance block with two pressure gauges for tank pressure and working pressure and high quality CONDOR pressure switch
• Fifteen-year rust-through warranty on inside and outside hot-dip galvanized compressed air tank
• Fully automatic on-off operation
• Ready for connection with all fittings

Increased flexibility

• By connecting the second compressed air tank, the container volume is doubled, whereby a higher air supply can be established
• An increased demand for air can thus be covered in the short term.
• The second compressed air tank can be disconnected from the compressed air supply e.g. for chiselling or sandblasting. This halves the container volume and pressure builds up faster.

Equipment details:

• K version with refrigeration dryer with integrated automatic steam trap as standard
• Pressure dew point 5 °C, compressed air inlet temperature 35 °C, cooling air temperature 25 °C


• K version additionally with pre-filter for separating condensate and solid impurities with particles up to 1 μm
• Compressed air quality according to ISO 8573-1
• As a pre-filter in front of the refrigeration dryer


• KK version with automatic steam trap on the compressed air tank
• This condensate drainage without unnecessary pressure loss


• Condensate conditioner for oil-water separation

• Ideal in combination with prefabricated solutions
• Permanently sealed without pressing
• Installation even in confined spaces
• Detachable fittings can be reused
• Cost savings through quick assembly

• Permanently sealed without pressing
• Cost savings through quick and easy assembly
• Ideal in combination with prefabricated solutions
• Compatible with other standards-compliant pipes
• No confusion of contours possible
• Installation even in confined spaces
• Extraction forces far beyond the requirements of the standard
• Pipe components can be dismantled and reused
• Numerous national and international approvals
• O-rings included

• To mount one or more interconnected filters on the wall

• 99% separation of the precipitated condensate directly after the compressor
• For separating large amounts of condensate (water, oil) and dirt particles by centrifugal acceleration of the compressed air
• Use on aftercoolers and refrigeration dryers
• High quality corrosion protection through complete anodization
• Low-flow housing made of seawater-resistant aluminum
• Outside additionally powder-coated
• Differential pressure < 0.06 bar
• With BEKOMAT® steam trap

• For continuous air demand and discontinuation operation
• Electronic control for reliability and efficiency
• Optimized oil separation system
• High-quality equipment
• Smooth and quiet

• Just as mobile and compact as piston compressors, but with the great advantage of being able to generate compressed air continuously without any cooling pauses
• Can also be used in intermittent operation due to oil temperature control

Electronic temperature control for optimum oil temperature

• Optimum oil viscosity due to constant temperature, therefore also suitable for intermittent operation with frequent load changes
• Temperature control of the oil prevents condensation and minimizes wear
• Better energy efficiency compared to a piston compressor with the same delivery capacity
• Additional oil heat exchanger for cooling

K-Tronic electronic control system for reliability and efficiency

• Adjustment of the cut-in and cut-out pressure
• Direction of rotation control
• Monitoring and control of the oil temperature
• Maintenance interval display

Optimized oil separation system

• Effective oil pre-separation by gravity, as the oil sump is located at the lowest point
• Oil separator cartridge and oil filter cartridge easily accessible for maintenance

Integrated design of the compressor unit

• Convenience and high operational reliability thanks to integration and short connections of all key components on the compressor unit
• Maintenance-free direct drive
• Freewheel valve for load-free operation after reaching the set pressure

Lightweight, compact and quiet

• Can be used in mobile applications or where space is limited
• Highly efficient and low-noise fan
• Smooth-running compressor with low noise level

High-quality equipment

• Hot-dip galvanized compressed air tank inside and out with 15-year guarantee against rusting through
• Compressed air tank in accordance with AD 2000
• Splash water protection to IP 54
• Flexible armored hose lines with heat protection prevent vibration fractures
• With phase inverter on the plug as standard
• Ready for connection with all fittings
• Also available with refrigeration dryer and pre-filter

• Maintenance-free direct drive
• Low space requirements and energy costs
• Low noise level
• Generously dimensioned cooler
• Easy installation and accessibility of all maintenance positions

Coaxial screw-type compressor with maintenance-free drive and maximum energy efficiency in all pressure ranges. Low compressor speeds and low load on the bearings of the patented direct drive ensure a very long service life.

• Prevents motor overload, reduces wear and makes for a longer service life
• Monitoring of operating hours, temperature and motor overload
• Phase sequence relays control the direction of rotation of the motor, thereby avoiding possible damage during commissioning or after relocation

• Low-noise centrifugal fan guarantees optimal operating temperatures even under unfavourable conditions
• Thermostatically and electronically controlled fan and generously sized heat exchanger result in a longer service life and less fluctuation in oil temperature

• Low noise, suitable for deployment in any work environment
• Small footprint facilitates transport and deployment
• Service-friendly thanks to optimum accessibility and easy removal and installation of all components that require maintenance
• All air and oil lines are made of heat-resistant rubber
• Equipped with a star delta circuitry as factory standard
• Ready to connect with all fittings and safety equipment

• More reliable compressed air system without costly downtimes and production delays while simultaneously ensuring product quality
• Fully integrated into the housing
• Ready for use without installation overhead
• Equipped with control panel and time-controlled condensate drain

• The two-stage compression 2-cylinder high-performance unit enables a very low speed, resulting in a particularly quiet and low-vibration run
• The large fan ensures optimal cooling
• Intercooler and aftercooler ensure a low container inlet temperature and thus reduce condensation
• High quality electric motor with high torque
• Electric motor equipped with motor protection switch
• Fifteen-year rust-through warranty on inside and outside hot-dip galvanized compressed air tank
• 200, 270 and 500 liter containers according to AD 2000
• With high-quality CONDOR pressure switch
• Flexible armored hose line with heat protection prevents vibration breakage
• Star-delta switch with operating hours counter from 7.5 kW models
• High quality finned intake filter from Airprofi 1003/500/10 H
• Ready for connection with all fittings

• Particularly space-saving with 100 l containers

Recommended accessories:

• For oil-water separation
• Important notes on condensate treatment in the section on compressed air preparation

• For separating condensate and solid impurities with particles up to 1 μm
• Compressed air quality according to ISO 8573-1
• As a pre-filter in front of the refrigeration dryer

• At the compressed air tank
• No unnecessary pressure loss during condensate drainage

• With integrated automatic steam trap
• Pressure dew point at 5 °C, ambient temperature 25 °C, atmospheric dew point at -22 °C

• All main components of the compressor are manufactured by machining using numerically controlled machine tools, including suction regulator, separator block and minimum pressure valve
• The cooling takes place via a temperature-controlled centrifugal fan and an oversized combination cooler. This ensures optimal cooling even under the most extreme conditions.
• Generous access panels allow easy maintenance and immediate control of the internal components, reducing the time required for inspection and maintenance to one medium.
• The main operating parameters are monitored by the electronic microprocessor control NRG: In addition to the various functions, a weekly timer for switching on and off is available to meet the requirements of each customer. In addition, up to 4 machines can be controlled simultaneously according to the master / slave principle.

• Compressed air tank according to AD 2000 / without fitting set / 11 and 16 bar
• Hot dip galvanized inside and outside
• Constructed in accordance with EC Directive 87/404 / EEC or PED 97/23 / EC -AD 2000, Module: H / H 1
• Operating conditions according to AD 2000 - S1 (10/2000) = arrivals and departures and 20% pressure fluctuation range
• ISO 9001:2015 certified manufacturer

• Two-cylinder high-performance units made of gray cast iron for a long service life
• Aftercooler with cooling fins ensures a low tank inlet temperature and thus less moisture in the compressed air
• Ten-year guarantee against rusting through on powder-coated compressed air tanks

• Two-cylinder high-performance units made of gray cast iron for a long service life
• Large fan wheel and a cooling air baffle on the cylinder for optimum cooling of the compressor
• Quality electric motor with high starting torque
• Electric motor equipped with motor protection switch
• Aftercooler with cooling fins ensures a low tank inlet temperature and thus less moisture in the compressed air
• Sturdy metal belt guard
• 400 volt models with phase inverter as standard for easy manual reversal of the direction of rotation
• Compressed air tank equipped with safety valve, tank pressure gauge and condensate drain valve
• Including all safety devices
• Completely ready for connection
• Filter pressure regulator with one pressure gauge for regulated compressed air cleaned of condensate, dirt and oil, second pressure gauge for tank pressure
• Ten-year guarantee against rusting through on powder-coated compressed air tanks
• Includes high-quality one composite safety coupling and high-quality CONDOR pressure switch
• Flexible armored hose line with heat protection for long service life without vibration breakage
• Ergonomic handle, rubber handle and transport handle on the compressed air tank for convenient transportation
• Sturdy steering chassis with parking brake in combination with large, puncture-proof wheels for comfortable transportation

• Extremely quiet due to sound-insulated housing and additional silencer on the intake filter
• Two-cylinder high-performance unit made of grey cast iron with low speed guarantee particularly quiet and low-vibration operation -> less wear - longer service life
• Large fan impeller on the compressor and temperature-controlled radial fan on the housing ensure optimum cooling of the entire interior
• Equipped with glycerine pressure gauge, operating hours counter and error display via LED lights

• Extremely quiet due to sound-insulated housing and additional silencer on the intake filter
• Suitable for installation even in noise-sensitive areas and the direct working environment
• Two-cylinder high-performance unit made of grey cast iron with low speed warrantys particularly quiet and low-vibration operation: less wear and longer service life
• Large fan impeller on the compressor and temperature-controlled radial fan on the housing ensure optimum cooling of the entire interior
• Inter- and aftercooler as well as an additional air duct between motor and compressor reduce condensate formation
• High-quality Condor pressure switch
• Equipped with glycerine pressure gauge, hour meter and fault indication via LED lights
• Quality electric motor with motor protection switch and start-up relief
• Facility for easy tensioning of the V-belt
• Service-friendly design
• Ready for connection with all fittings and safety devices

• Boiler batteries for up to 400 liters of additional air supply
• Available as 2-pack and 4-pack batteries
• All tank batteries also available in 13 bar version with 75 l tanks
• By connecting additional compressed air tanks, the tank volume is increased, whereby a higher air supply can be built up.
• Increased air demand can be covered at short notice
• If required, individual compressed air tanks can be disconnected from the compressed air supply via ball valves, which reduces the tank volume accordingly and thus builds up the pressure more quickly.
• Fifteen-year warranty against rusting through on the inside and outside of hot-dip galvanized air reservoirs.
• All tank batteries can be easily moved with the lift truck