The 14-018 NEO rectangular pneumatic orbital sander enables effective and efficient grinding of large surfaces. Thanks to its power supply by compressed air, it is suitable for prolonged use. It is equipped with a comfortable handle to improve work comfort by reducing vibrations, and metal clamps allowing the use of abrasive paper cut from a roll. The tool also has a ¼" universal air connection. The air outlet is located on the back of the sander. Features: foot size 89 x 165 mm; maximum speed 9,0000 rpm; average air consumption 128 l/min; operating pressure 6.3 bar; air outlet at the back; air connection 1/4"; grinder length: 165 mm.
The 150 mm eccentric pneumatic sander, vacuum dust extraction 14-013 by NEO is a device with a disc diameter of 125/150 mm. It reaches a speed of 12,000 revolutions per minute and its average air consumption is 133 l/min. The grinder operates at a working pressure of 6.3 bar. A central dust extraction system is built in to keep the workplace tidy. The sander has a 1/4" connector and a 3/8" diameter hose. Its weight is just 1.1 kg. CE certification confirms compliance with European standards.
Workshop Cabinet, 7 drawers + 129 tools 84-222-9 by NEO TOOLS is a 680 x 460 x 1030 mm accessory cabinet with a load capacity of 280 kg. It has a robust steel body, central locking, rubber lining on the top and ball bearing slides. With its large-diameter 125 mm castors and side handle, it is easy to transport. A central lock secures the contents. Cabinet offered with selected inserts with part numbers: 84-230, 84-232, 84-234, 84-235, 84-236, 84-237, 84-238, 84-240, 84-242. This is the optimal NEO TOOLS set containing the necessary tools for mechanical repairs. Workshop cabinet with contents recommended for professionals and DIY enthusiasts.
Single hook 40mm, 5pcs. NEO (ref. 84-095) is made of steel and is one of the elements of the NEO system. The hook makes it easier to hang up tools while working, helps to keep things tidy and provides quick access to tools. The product complements the NEO system. By using the various elements of the NEO system, you gain the possibility to compose your own, ideal place for storing tools. The NEO brand meets the expectations of professionals.
The NEO TOOLS mobile pneumatic oil beaker with control tank 10-811 is a device offering a tank emptying pressure of 1 to 3 bar and an operating pressure of 6 to 8 bar. The sink-puller is equipped with a 70-litre capacity tank and a 10-litre steel sink bowl with a thickness of 1.5mm, weight of 2.5kg and diameter of 42cm. The unit has a 10-litre graduated inspection tank and its total weight is 26 kg. The recommended operating temperature of the oil, on the other hand, is between 40 and a maximum of 60 degrees C. The NEO TOOLS oil beaker is equipped with 4 castors, including 2 swivel castors, offering convenient transport. The adjustable height allows the device to fit various car models, and the durable construction translates into long-lasting use. The large capacity tank and the additional possibility of sucking the old oil out of the oil sump, without having to unscrew the drain plug, as well as the practical inspection container - all contribute to the high popularity of this product in garages and service workshops. With the NEO TOOLS oil sump drainer, you will maintain cleanliness and tidiness while working with oil changes, and also have the possibility of visually assessing and checking the amount of oil collected. This is an indispensable device for professionals and automotive enthusiasts.
NEO 10 mm pneumatic drill features high durability and reliability. Maximum drill diameter 10 mm. The tool features left/right direction selector switch and maximum speed 1800 rpm. Accordance with European safety standards is confirmed with CE certificate. NEO brand meets expectations of professionals.
Tool set for plastic oil pans in TFSI engines 11-384 by NEO is a set of tools in 1/4" and 1/2" sizes recommended for use in Audi, VW, Skoda and Seat cars, over 2013 vintage and 1.2, 1.4, 1.8, 2.0 TFSI petrol engines. The set is offered in a practical case for easy transport and storage. The tools will be indispensable in every car workshop. They facilitate changing and are recommended for use when unscrewing oil sump plugs.
24T and 32T blades for 14-034, set of 10 pcs. 14-034-401 by NEO is a set of 10 dual-purpose blades for use with NEO's 14-034 airhead saw. The blades are offered in sizes 24T (5 pieces) and 32T (5 pieces). These robust tools will work well for cutting through plastic, metal and wood. They will be an indispensable addition to your workshop, automotive service and repair equipment.
NEO's 11-222 self-locking band pliers is a tool for installing and removing self-locking bands in hard-to-reach places. It is characterised by a squeeze range of 0 to 45 mm and an automatic locking mechanism for easy handling of spring ties. The pliers are also compatible with the most commonly used cable ties in the automotive industry.
Fastening belt with ratchet 25 mm x 5 m, withstanding 300 kg PP 10-704 by NEO TOOLS is a belt characterised by a width of 25 mm and a length of 5 m. It is adapted for securing loads during transport or storage. Its durability is up to 300 kg. The fastening belt by NEO TOOLS is equipped with a robust tightening ratchet. It is made of PP. It is a certified product recommended for both amateur and professional use.
NEO draining filter features sturdy, metal body with 1/2" connector. Equipped with pressure reducer. Filtration ratio up to 20 µm. Working pressure up to 12 bar. Function of container semiautomatic emptying. Maximum throughput capacity 2600 l/min., concentrate container capacity 60 cm3. Filter allows to protect pneumatic tools from dirt. It improves pneumatic tools lifetime by preventing damage caused by water in compressed air. High quality of the product confirmed with CE certificate. NEO brand meets expectations of professionals.
Medium bag for power tools Energy+ GRAPHITE with a capacity of 18.5 L, made of polyester. The bag is equipped with 8 internal pockets, 2 internal tool loops and 7 external pockets, allowing you to organize your tools and their safe transport.
The slot gauge 26 leaves (0.04 - 0.63 mm) 65MN/ stainless steel 11-190 by NEO is a practical tool that allows you to measure the distance between two pieces of construction in situations where it is not possible to use any other measuring instrument. It has 26 leaves with a thickness of 0.04 to 0.63 mm, the results of which can be easily read even after the tool has been removed from the gap - so it is also used in situations where we have limited space. It allows measurements to be taken of bearing clearances or engine valve clearances. The allotment holder, on the other hand, can check and adjust the gap at the spark plug electrodes of the lawnmower or petrol chainsaw himself. The NEO brand gap gauge is made of robust 65 MN steel and stainless steel. It is perfect for car workshops and garages of motor vehicle users.
Fastening belt with ratchet 25 mm x 4.5 m, withstanding 260 kg PP 10-703 by NEO TOOLS is a belt characterised by a width of 25 mm and length of 4.5 m. It is adapted for securing loads during transport or storage. Its durability is up to 260 kg. The fastening belt by NEO TOOLS is equipped with a robust tightening ratchet. It is made of PP. It is a certified product recommended for amateur and professional use.
Clamp pliers 11-223 by NEO is a tool for clamping on rubber hoses in cars (cooling system, fuel system, air conditioning system). They are characterised by practical rubber handle linings. The pliers are also compatible with the most commonly used cable ties in the automotive industry.
NEO 1/4" mini draining filter. Mini draining filter 1/4" has sturdy, metal body with 1/4" connection. It protects pneumatic tools from contaminations and condensing water vapours. NEO brand meets expectations of professionals.
NEO oiler for pneumatic devices with threaded 1/4" connection. Made of brass. Oiler lubrication helps to reduce wear of moving parts in pneumatic tools. NEO brand meets expectations of professionals.
Belt with cam buckle 25 mm x 2.5 m 2 pieces 10-711 by NEO TOOLS is a robust belt for transporting and storing loads, equipped with a cam buckle. It is characterised by a width of 25 mm and a length of 2.5 m. It is made of durable PES material. Its strength is up to 500 kg/piece. The NEO TOOLS brand cam buckle belt is offered in two pieces for maximum safety.
NEO sockets for oxygen sensors and injector nozzles, set of 14 pcs, 11-880 is a product for professionals who value quality and comfort. The set includes sockets: 12 point, hexagonal, offset and 12 point for injector nozzles. All placed in convenient, sturdy case that makes it easier to keep the workshop tidy.
Durable GRAPHITE Energy+ bag for power tools with a capacity of 12 l. Made of a material with a dense weave, providing high abrasion resistance. Laminated on the inside polyester material protects the contents of the bag against moisture and adverse weather conditions. 14 outer pockets, 3 spacious inner pockets and 9 tool hooks. The hooks allow you to attach tools such as cordless drills (metal catch) or rolled measures (material straps). Dimensions of the bag allow comfortable transfer up to two power tools with accessories (batteries, charger, additional accessories). Batteries as well as other elements can be secured against moving with additional velcro straps. The bag has a comfortable and solid carrying handle and an adjustable shoulder strap with metal snap hooks. Strengthened, waterproof bottom with feet protects the contents while working in difficult conditions. On the back wall there is a window for a personalized label or business card.Durable GRAPHITE Energy+ bag for power tools with a capacity of 12 l. Made of a material with a dense weave, providing high abrasion resistance. Laminated on the inside polyester material protects the contents of the bag against moisture and adverse weather conditions. 14 outer pockets, 3 spacious inner pockets and 9 tool hooks. The hooks allow you to attach tools such as cordless drills (metal catch) or pocket rules (material straps). Dimensions of the bag allow comfortable transfer up to two power tools with accessories (batteries, charger, additional accessories). Batteries as well as other elements can be secured against moving with additional velcro straps. The bag has a comfortable and solid carrying handle and an adjustable shoulder strap with metal snap hooks. Strengthened, waterproof bottom with feet protects the contents while working in difficult conditions. On the back wall there is a window for a personalized label or business card.
