AIRCRAFT

• Innovative LOGIN control with 4.3" touch screen for easy operation and full control of all functions.
• Energy-efficient IE4 motor
• Rotation direction control for the motor, prevents damage during start-up or after a change of stand location
• High cooling effect and low noise level due to thermostatically controlled radial fan
• Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled radial fan, optimum cooling air flow and generously dimensioned heat exchangers
• Aftercooler reduces the effort for drying and filtration of the generated compressed air
• Star-delta switching as standard
• Easy to service: simple removal and installation of all components requiring maintenance

• Maximum mechanical efficiency
• No more drive parts required
• Reduction of moving components

• Top-efficient cooling air flow
• Special, ground valves made of stainless steel.

• Front and additional cooling for maximum durability
• Anti-corrosive surface treatment

• Maximum mechanical efficiency
• No transfer elements
• Highly efficient cooling air fan
• Lamella valves for optimum cost-effectiveness
• Front and additional cooling for maximum durability
• Anti-corrosive surface treatment

• Large fan wheel and a cooling air baffle on the cylinder for optimum cooling of the compressor
• Aftercooler with cooling fins for low vessel inlet temperature and less moisture in the compressed air
• Sturdy metal belt guard
• "Made in Germany": vessel pressure gauge; filter pressure regulator with pressure gauge for regulated compressed air cleaned of condensate, dirt and oil
• Ten-year warranty against rust-through on powder-coated compressed air reservoir
• Including high-quality composite safety coupling and high-quality CONDOR pressure switch

• Two-cylinder high-performance units made of gray cast iron for a long service life.
• Large fan wheel and a cooling air baffle on the cylinder for optimal cooling of the compressor
• Quality electric motor with high starting torque
• Electric motor equipped with motor protection switch
• Aftercooler with cooling fins ensures a low tank inlet temperature and thus less moisture in the compressed air
• Sturdy metal belt guard
• Start-up capacitor and start-up relief valve ensure easy start-up on 230 volt models
• Container pressure gauge "Made in Germany
• Filter pressure regulator with pressure gauge "Made in Germany" for regulated compressed air cleaned of condensate, dirt and oil
• Ten-year warranty against rust-through on powder-coated compressed air reservoir
• Includes high quality composite safety coupling and high quality CONDOR pressure switch
• Large ergonomic handle
• Stable steering chassis with parking brake in combination with large, puncture-proof PU wheels
• Made in Europe

• The two-stage compression 2-cylinder high-performance unit enables a very low speed, resulting in a particularly quiet and low-vibration run
• The large fan ensures optimal cooling
• Intercooler and aftercooler ensure a low container inlet temperature and thus reduce condensation
• Quality electric motors equipped with motor protection switch
• Flexible armored hose line with heat protection prevents vibration breakage
• Fifteen-year rust-through warranty on inside and outside hot-dip galvanized compressed air tank
• With high-quality CONDOR pressure switch
• Star-delta switch with operating hours counter for 7.5 and 11 kW models
• Ready for connection with all fittings

• For connecting compressors to compressed air tanks or pipe systems with detachable double nipple
• One connection each with internal and external thread

• Locks off the compressed air tank from the rest of the air network after the end of the working day, compressed air content in the tank is retained
• Opens automatically at the beginning of the shift and closes at the end of the shift
• Multiple layers adjustable daily - thanks to microprocessor control and 7-day program
• Slow 90 ° ball rotation in 30 seconds at G1 or 105 seconds at G2 avoids pressure shock when opening and closing
• With FPM seals and stainless steel ball
• Brass nickel-plated valve body
• 24 hours timer display
• Operating temperature: 0 ° C to + 60 ° C
• Operating voltage: 115 V or 240 V AC / DC 50/60 Hz
• Power consumption: 7 W during cycle switching
• Max. Temperature: 50 ° C ambient temperature, 100 ° C medium temperature
• Pressure range: 0 to 16 bar
• Protection class: IP 54

• Innovative LOGIN control with 4.3" touch screen for easy operation and complete control over all functions
• Connection of up to eight compressors possible, no matter if with constant or variable speed
• All information on current operating status at a glance
• Rotation direction control for the motor, prevents damage during start-up or after a change of location
• Low noise emission (only max. 67 dB) during operation, due to extremely low speed of the screw compressor and use of a low-noise radial fan
• Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled centrifugal fan, optimum cooling air flow and generously dimensioned heat exchangers
• Aftercooler reduces the effort for drying and filtration of the generated compressed air
• Star-delta switching as standard
• Easy to service: simple removal and installation of all components requiring maintenance

• Compressed air filters are used for highly efficient removal of solid particles, water, oil, aerosols, hydrocarbons, odors and vapors from compressed air systems.
• To achieve the required quality of compressed air, filters that gradually remove all types of solid and liquid contaminants from the compressed air must be installed in the compressed air line.
• Your advantages through better quality compressed air:
• Safe filtration of both liquids such as water and aerosols as well as particles, dust and gases
• Better working and production conditions
• Optimum protection of connected tools and machines
• Improved product quality through reduction of rejects
• Protection of the compressed air system against contamination
• Increase of productivity by reduction of instant maintenance

• for the separation of solid contaminants up to 0.1μm
• Residual oil aerosol content up to 0.1 mg / m³ at 20 ° C and 1 bar
• Operating temperature 1.5 to 65 ° C
• absolute compressed air quality according to ISO 8573-1
• for safe separation of condensate and particles
• complete with filter element and float valve

• Large fan wheel and a cooling air baffle on the cylinder for optimum cooling of the compressor
• Aftercooler with cooling fins for low vessel inlet temperature and less moisture in the compressed air
• Sturdy metal belt guard
• "Made in Germany": vessel pressure gauge; filter pressure regulator with pressure gauge for regulated compressed air cleaned of condensate, dirt and oil
• Ten-year warranty against rust-through on powder-coated compressed air reservoir
• Including high-quality composite safety coupling and high-quality CONDOR pressure switch

• Two-cylinder high-performance units made of gray cast iron for a long service life.
• Large fan wheel and a cooling air baffle on the cylinder for optimal cooling of the compressor
• Quality electric motor with high starting torque
• Electric motor equipped with motor protection switch
• Aftercooler with cooling fins ensures a low tank inlet temperature and thus less moisture in the compressed air
• Sturdy metal belt guard
• Start-up capacitor and start-up relief valve ensure easy start-up on 230 volt models
• Container pressure gauge "Made in Germany
• Filter pressure regulator with pressure gauge "Made in Germany" for regulated compressed air cleaned of condensate, dirt and oil
• Ten-year warranty against rust-through on powder-coated compressed air reservoir
• Includes high quality composite safety coupling and high quality CONDOR pressure switch
• Large ergonomic handle
• Stable steering chassis with parking brake in combination with large, puncture-proof PU wheels
• Made in Europe

• The two-stage compression 2-cylinder high-performance unit achieves a very low rotational speed, resulting in a particularly quiet and low-vibration run
• This ensures a longer life due to less wear
• Large fan wheel and a cooling air baffle on the cylinder for optimum cooling of the compressor
• Aftercooler with cooling fins and intercooler to the aftercooler ensure a low container inlet temperature and thus less moisture in the compressed air
• High quality electric motor with high torque
• Electric motor equipped with motor protection switch
• With high-quality CONDOR pressure switch
• Equipped with a pressure gauge for tank pressure and a ball valve on the compressed air tank
• Compressed air tank equipped with safety valve, container pressure gauge and condensate drain tap
• Ten-year rust-through warranty on powder-coated compressed air tank
• With all safety devices
• Fully wired
• Stable belt guard made of metal
• Including swinging elements
• Connection to grid by qualified electrician

15 kW võimsusega AIRCRAFT A-PLUS 16-10-500 K kruvikompressor tagab kuni 2050 l/min efektiivse tootlikkuse 10-baarise töörõhu juures. Vastupidav Poly-V rihmülekanne, EasyTRONIC MICRO II juhtimine ja 500-liitrine kuumtsingitud õhumahuti muudavad selle usaldusväärseks lahenduseks nõudlikuks tööstuslikuks kasutamiseks.

Tehnilised andmed:

• Mudel: AIRCRAFT A-PLUS 16-10-500 K
• Tootekood: 2092874
• Kompressori tüüp: õliga määritav kruvikompressor
• Mootori võimsus: 15 kW
• Toitepinge: 400 V / 50 Hz
• Maksimaalne töörõhk: 10 bar
• Imemisvõimsus: ligikaudu 2500 l/min
• Tootlikkus (efektiivne tootlikkus/FAD): 2050 l/min
• Suruõhumahuti maht: 500 l
• Õhuühendus: 3/4"
• Õlikogus: 6,5 l
• Müratase: 68 dB(A)
• Mõõtmed (P × L × K): 1980 × 700 × 1630 mm
• Kaal: 436 kg
• Käivitus: täht-kolmnurkkäivitus
• Ülekanne: Poly-V rihmülekanne
• Järeljahuti: standardvarustuses
• Mahuti: seest ja väljast kuumtsingitud

• Simple and quick installation
• Ideal for compressed air and liquids
• Can be assembled without tools
• Fast, multiple disconnections possible
• Very good flow properties

• Compressed air filters are used for highly efficient removal of solid particles, water, oil, aerosols, hydrocarbons, odors and vapors from compressed air systems.
• To achieve the required quality of compressed air, filters that gradually remove all types of solid and liquid contaminants from the compressed air must be installed in the compressed air line.
• Your advantages through better quality compressed air:
• Safe filtration of both liquids such as water and aerosols as well as particles, dust and gases
• Better working and production conditions
• Optimum protection of connected tools and machines
• Improved product quality through reduction of rejects
• Protection of the compressed air system against contamination
• Increase of productivity by reduction of instant maintenance

• For separating solid contaminants up to 1μm.
• Operating temperature 1.5 to 65 ° C, absolute compressed air quality according to ISO 8573-1.
• for safe separation of condensate and particles
• Complete with filter element and float valve

• Space-saving single compressor with ribbed belt drive
• With control ETM II including direction of rotation control
• Especially suitable for companies that have a continuous air requirement, but want a compact unit with a reduced noise level and low operating costs
• Standard supersonic insulation allows installation in sensitive rooms
• Intensive cooling warrantys operational safety and good air quality
• Standard with star-delta connection
• Ideal also suitable for supplementing existing systems, eg for covering the compressed air base load
• Standard with thermal motor protection, oil temperature monitoring (max 110 °C) and operating hours counter, ensuring high operational safety
• Service-friendly due to optimal accessibility and easy disassembly and assembly of all important components
• Fifteen-year rust-through warranty on inside and outside hot-dip galvanized compressed air tank

• Simple and quick installation
• Ideal for compressed air and liquids
• Can be assembled without tools
• Fast, multiple disconnections possible
• Very good flow properties

• Innovative LOGIN control with 4.3" touch screen for easy operation and full control of all functions.
• Rotation direction control for the motor, prevents damage during start-up or after a change of location
• High cooling effect and low noise level due to thermostatically controlled radial fan
• Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled centrifugal fan, optimum cooling air flow and generously dimensioned heat exchangers
• Aftercooler reduces the effort for drying and filtration of the generated compressed air
• Easy to service: simple removal and installation of all components requiring maintenance

• Larger speed/load range
• Larger delivery volume supply range
• Extremely energy efficient - up to 50% energy consumption savings compared to a "fixed speed" model
• Very quiet operation - only 64 dB

• Ideal for frequently changing compressed air consumption
• Compressor delivery rate adjusts to actual consumption
• Electronic control monitors motor and compressor speed and keeps line pressure constant even when consumption fluctuates widely
• Advanced and efficient cutting-edge technology in the smallest possible space