AIRCRAFT

• EasyTRONIC MICRO II electronic control with pressure sensor operation as standard, thus preventing motor overload, reducing wear and extending service life
• With star-delta switch
• High cooling effect and lower noise level due to thermostatically controlled radial fan
• Operating hours counter records load and overrun times, thus ensuring compliance with maintenance intervals - Indication of maintenance requirement via automatic message
• Rotation direction control for the motor avoids possible damage during commissioning or after a change of location
• Screw compressor with wear-resistant Poly V ribbed belt drive and carriage tensioning system
• Easy maintenance due to easily accessible elements
• Optimum operating temperatures due to thermostatically controlled fan, optimum cooling air flow and generously dimensioned heat exchanger, thus longer service life, lower fluctuations in oil temperature than with thermostat control
• Aftercooler as standard, thus less effort for drying and filtration of the generated compressed air
• Small external dimensions, thus easy transport and installation

• Innovative LOGIN control with 4.3" touch screen for easy operation and full control of all functions.
• Energy-efficient IE4 motor
• Rotation direction control for the motor, prevents damage during start-up or after a change of stand location
• High cooling effect and low noise level due to thermostatically controlled radial fan
• Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled radial fan, optimum cooling air flow and generously dimensioned heat exchangers
• Aftercooler reduces the effort for drying and filtration of the generated compressed air
• Star-delta switching as standard
• Easy to service: simple removal and installation of all components requiring maintenance

• Compressed air tank according to AD 2000 / without fitting set / 11 and 16 bar
• Hot dip galvanized inside and outside
• Constructed in accordance with EC Directive 87/404 / EEC or PED 97/23 / EC -AD 2000, Module: H / H 1
• Operating conditions according to AD 2000 - S1 (10/2000) = arrivals and departures and 20% pressure fluctuation range
• ISO 9001:2015 certified manufacturer

• Length: 10 m
• Width: 12 mm
• Thickness: 0.075 mm

Advantages of DRYPOINT eco control

• Integrated DRYPOINT M Plus solution: filtration and dryer in a compact form, as well as condensate drain integrated
• Filtration on the spot in the treatment chain where the highest efficiency is achieved
• Easy maintenance / replacement of filter element as with a filter
• Application-specific degree of dryness can be selected
• Consistent compressed air quality under fluctuating operating conditions
• Energy saving through minimization of purging air consumption for actual amount of useful air and degree of drying
• Power evaluation via LED, forwarding via current output 4 … 20 mA possible
• User-friendly: Easy to use, test functions, error messages
• Concept based on the fail-safe principle, error message can be picked up via potential-free contact

Functionality of the DRYPOINT® M eco control

Based on the measurement result from the sensor, the control software decides in defined cycles whether and how long the full amount of purge air has to be provided to achieve and stabilize the required degree of dryness. This process is implemented by means of a targeted clocking of a solenoid valve. In each cycle, the duration of the two process sections described below varies in order to keep the degree of drying within the specified tolerance range.

• User-friendly operating concept
• Efficient construction for cost-effective and safe operation
• Cooling fan from 0 - 100% speed controlled, this eliminates the usual pressure switch and the thermostat for the fan control
• Less wearing parts with constant pressure dew point
• Control displays five different alarm conditions and keeps them in memory
• Refrigerant compressor switches off below 15 ° ambient temperature, if no compressed air flows through
• Clarity and good accessibility of all components to be serviced
• With built-in automatic steam trap

• High profitability
• Excellent price-performance ratio
• No unnecessary compressed air losses due to integrated electronic steam trap
• Connected tools and machines are optimally protected
• User-friendly operating concept

Higher efficiency - lower costs
The innovative and highly efficient ASDB series uses a patented 3-circuit heat exchanger system. In combination with the glycol cycle, a significant energy saving is achieved. The glycol mass acts like a cold-storing medium. The ASD dryers are particularly suitable for partial load operation and for irregular compressed air requirements. By using the ASD dryers, you can noticeably save operating costs.

Operation and advantages of the glycol cycle
The water-glycol mixture is cooled when not all the cooling energy is needed to cool the compressed air. When the refrigeration compressor shuts off during partial load operation, the compressed air is cooled down by the cold stored in the glycol mass. Only when the mass is no longer cool enough, the refrigerant compressor turns on again. Therefore, the ASD dryers show their potential for savings, especially during partial load operation and irregular compressed air requirements. When the air compressor starts again after a pause and releases compressed air into the piping system, the ASD dryers immediately cool this compressed air to dew point because the glycol mass immediately provides the temperature required. Many other systems, in which the refrigeration compressor can cool down to operating temperature only after a start-up period, allow humid air to flow into the supply network during this time, with all the adverse effects.

The advantages at a glance

• Improved energy efficiency thanks to patented 3-circuit heat exchanger system
• Energy saving and longer service life by switching off the refrigeration compressor in partial load operation
• Optimal dew point control with additional temperature sensor for the glycol control
• Condensate drainage without pressure loss through integrated electronic, level-regulated condensate separator
• Optimum performance under all load and ambient conditions thanks to variable fan speed control
• By using quality components longevity and reduction of service costs
• Operating cost reduction with active environmental protection

The operation of the patented 3-circuit heat exchanger system

• Warm saturated with compressed air compressed air flows into the heat exchanger.
• Pre-cooling of the inlet air is caused by the countercurrent cold outlet air in the heat exchanger.
• Input air is brought to dew point temperature by the refrigerant circuit, causing condensate.
• Condensate is collected and removed in the integrated electronic, level-regulated condensate separator.
• Glycol circulation stores excess energy and cools the intake air at partial load.
• The refrigeration compressor switches off at partial load, which can double its service life.

• Cylinders and cylinder heads with long ribs for optimum heat dissipation;
• carefully balanced crankshaft made of cast iron for better concentricity
• Stainless steel valves with high air flow
• Pulley designed as a fan
• Optimized airflow, high fan performance
• Highly efficient air filter with labyrinth intake channel for noise reduction

Tehnilised andmed:

• Ühenduskeere: 1/4"
• Maksimaalne sisendrõhk: 12 bar
• Töörõhu vahemik (sisendrõhk): 1,5-12 bar
• Filtri tüüp: paagutatud filter (sinterfilter) tsentrifugaalpõhimõttel
• Rõhuregulaator: membraanrõhuregulaator sekundaarse õhutusega
• Sobiv kasutusala: suruõhk ja neutraalsed gaasid
• Kondensaadi äravool: poolautomaatne
• Töötemperatuur: -10 °C kuni +50 °C
• Paigaldusasend: vertikaalne

• incl. relief valve
• F4 3/8" ( 3x 1/4" &3/8" connections)
• preset to 10.8 - 12.8 bar
• RM = rolling diaphragm

• Absolute Low maintenance drive with maximum energy efficiency through direct-coupled coaxial screw compressors
• Standard EasyTronic IV control prevents engine overload, reduces wear and ensures a longer service life
• High cooling effect and lower noise level due to thermostatically controlled centrifugal fan
• Longer life of the device and lower fluctuations of the oil temperature thanks to thermostatically controlled fan, optimal cooling air flow and generously dimensioned heat exchanger
• Less effort for drying and filtration of the compressed air generated by integrated aftercooler
• Secured maintenance intervals by recording the load and follow-up times via operating hours counter
• Display of the maintenance requirement via automatic message
• Avoidance of damage during commissioning or after relocation due to integrated direction of rotation control for the motor
• Service-friendly due to optimal accessibility and easy assembly / disassembly of all serviceable components
• Easy transport and setup due to small outer dimensions
• Monitoring of engine and compressor speed by SpeedTronic Control

Based on the frequency converter technology, the delivery volume of the compressor adapts to the actual consumption. The electronic control monitors the engine and compressor speed and keeps the network pressure constant. The user receives advanced advanced technology in a small space.

• Active energy saving
• Ideal for frequently changing compressed air consumption
• The variable speed compressor achieves maximum efficiency and keeps the network pressure constant, even when consumption fluctuates widely.

• Innovative LOGIN control with 4.3" touch screen for easy operation and full control of all functions.
• Rotation direction control for the motor, prevents damage during start-up or after a change of location
• High cooling effect and low noise level due to thermostatically controlled radial fan
• Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled centrifugal fan, optimum cooling air flow and generously dimensioned heat exchangers
• Aftercooler reduces the effort for drying and filtration of the generated compressed air
• Easy to service: simple removal and installation of all components requiring maintenance

• Larger speed/load range
• Larger delivery volume supply range
• Extremely energy efficient - up to 50% energy consumption savings compared to a "fixed speed" model
• Very quiet operation - only 64 dB

• Ideal for frequently changing compressed air consumption
• Compressor delivery rate adjusts to actual consumption
• Electronic control monitors motor and compressor speed and keeps line pressure constant even when consumption fluctuates widely
• Advanced and efficient cutting-edge technology in the smallest possible space

Aircraft A-K-MAX 11-08-500 K (IE3) on suure jõudlusega statsionaarne kruvikompressor, mis on varustatud 500-liitrise suruõhumahuti ja nutika LOGIN juhtsüsteemiga. Seade sobib tööstuslikuks kasutamiseks ning tagab stabiilse suruõhu tootmise, vaikse töö ja lihtsa hooldatavuse. LOGIN juhtimine võimaldab jälgida kõiki olulisi tööparameetreid 4,3-tollise puuteekraani kaudu ning ühendada ühtseks süsteemiks kuni kaheksa kompressorit.

Tehnilised andmed:

• Mootori võimsus: 11 kW
• Mootori efektiivsusklass: IE3
• Toitepinge: 400 V
• Võrgusagedus: 50 Hz
• Mootori pöörlemiskiirus: 3000 p/min
• Maksimaalne töörõhk: 8 bar
• Efektiivne tootlikkus: 1700 l/min
• Suruõhumahuti maht: 500 l
• Õhuühendus: 3/4"
• Müratase Lp: 67 dB(A)
• Õlitäite kogus: 8,05 l
• Ülekanne: otseühendus
• Kompressori tüüp: õliga määritav
• Paigaldusviis: statsionaarne
• Mõõtmed (P × L × K): 2000 × 730 × 1660 mm
• Kaal: 410 kg

• Cylinders and cylinder heads with long ribs for optimum heat dissipation;
• carefully balanced crankshaft made of cast iron for better concentricity
• Stainless steel valves with high air flow
• Pulley designed as a fan
• Optimized airflow, high fan performance
• Highly efficient air filter with labyrinth intake channel for noise reduction

Tehnilised andmed:

• Imivõime: 850 l/min.
• Tootlikkus: 660 l/min (6 bar juures).
• Maksimaalne töörõhk: 10 bar.
• Õhumahuti maht: 100 l.
• Mootori võimsus: 5,5 kW.
• Toitepinge: 400 V / 50 Hz.
• Surveastmeid: 2.
• Kaal: 120 kg.

• The two-stage compression 2-cylinder high-performance unit achieves a very low rotational speed, resulting in a particularly quiet and low-vibration run
• This ensures a longer life due to less wear
• Large fan wheel and a cooling air baffle on the cylinder for optimum cooling of the compressor
• Aftercooler with cooling fins and intercooler to the aftercooler ensure a low container inlet temperature and thus less moisture in the compressed air
• High quality electric motor with high torque
• Electric motor equipped with motor protection switch
• With high-quality CONDOR pressure switch
• Equipped with a pressure gauge for tank pressure and a ball valve on the compressed air tank
• Compressed air tank equipped with safety valve, container pressure gauge and condensate drain tap
• Ten-year rust-through warranty on powder-coated compressed air tank
• With all safety devices
• Fully wired
• Stable belt guard made of metal
• Including swinging elements
• Connection to grid by qualified electrician