AIRCRAFT suruõhuseadmed ja töökojatehnika Hammerjackis
Hammerjack on AIRCRAFT toodete ametlik maaletooja. AIRCRAFT on Saksamaa kvaliteetbränd, mis kuulub Stürmer Maschineni tootevalikusse ning on spetsialiseerunud professionaalsetele suruõhuseadmetele, kompressoritele ja töökojatehnikale. AIRCRAFTi tooteid usaldavad tööstusettevõtted, autoremonditöökojad, tootmisettevõtted ja professionaalsed meistrid üle Euroopa.
AIRCRAFTi valikusse kuuluvad kolbkompressorid, kruvikompressorid, suruõhumahutid, õhutöötlusseadmed, pneumotööriistad, voolikurullid, filtrid, kuivatusseadmed, rõhuregulaatorid ning muud suruõhusüsteemide komponendid. Kõik seadmed on loodud tagama kõrge töökindluse, energiatõhususe ja pika kasutusea.
Professionaalsed suruõhulahendused
Olgu tegemist väikese töökoja, autoremondiettevõtte või suure tootmisettevõttega – AIRCRAFT pakub töökindlaid suruõhusüsteeme ja seadmeid, mis aitavad tagada efektiivse ning katkematu töö igapäevaselt.
Miks valida AIRCRAFT?
AIRCRAFT toodete ametlik maaletooja.
Saksa kvaliteediga kompressorid ja suruõhuseadmed.
Terviklikud suruõhusüsteemide lahendused.
Kõrge töökindlus ja energiatõhusus.
Lahendused tööstusele, autotöökodadele ja tootmisettevõtetele.
Saksa kvaliteet professionaalidele
AIRCRAFT ühendab kaasaegse tehnoloogia, kvaliteetsed komponendid ja vastupidava konstruktsiooni, pakkudes professionaalseid suruõhulahendusi ka kõige nõudlikumates töötingimustes.
AD 36 suruõhu külmkuivati tagab kuiva ja puhta suruõhu kuni 600 l/min tootlikkusega. Kompaktne ja energiasäästlik lahendus integreeritud automaatse kondensaadi äravoolu ning kiirusreguleeritava jahutusventilaatoriga. Sobib väiksematele tööstus- ja töökojasüsteemidele.
Tehnilised andmed:
Tüüp: suruõhu külmkuivati
Õhuvooluhulk: 600 l/min
Õhuvooluhulk: 36 m³/h
Maksimaalne töörõhk: 16 bar
Õhuühendus: 3/8"
Võimsustarve: 0,12 kW
Mõõdud (P × L × K): 305 × 360 × 404 mm
Netokaal: 17 kg
Sisseehitatud automaatne kondensaadi äravool
Kiirusreguleeritav jahutusventilaator (0-100%)
Juhtseade kuvab ja salvestab 5 erinevat häireolekut
Külmakompressor lülitub välja alla 15 °C ümbritseva temperatuuri korral, kui suruõhuvool puudub
Konstantne rõhukastepunkt väiksema kulumise ja töökindla töö tagamiseks
ACS 3,5-10-90 V mobiilne kruvikompressor tagab pideva suruõhu tootmise ilma jahutuspausideta. Varustatud 90-liitrise paagi, elektroonilise K-Tronic juhtimise ja 10-barise töörõhuga.
Maximum, robust equipment and best quality at a reasonable price
Fully automatic on-off operation
With all safety devices
Completely ready for connection
Quality electric motor
Quality electric motor with high starting torque is equipped with a motor protection switch
Starting capacitor and starting relief valve ensure easy starting
Phase inverter as standard for easy manual reversal of the direction of rotation
Compressed air compression via high-performance HOS unit
The start-up relief valve ensures easy and pressureless start-up
The two-cylinder high-performance unit made of gray cast iron and the low speed warranty particularly quiet and low-vibration running and a long service life
This ensures an even longer service life due to even less wear and tear
High-quality compressor with optimum lubrication for a long service life and high reliability
Equipped with high quality intake filter
The aftercooler with large cooling fins ensures a low boiler inlet temperature and thus less moisture in the compressed air, which protects the air tools
Additional intercooler to the aftercooler
Corrosion-free valve plates for improved heat dissipation and compressor longevity
The large fan impeller and a cooling air baffle on the cylinder ensure optimum cooling of the compressor
A sturdy metal belt guard ensures optimum protection of the components and a high level of user safety
Compressed air supply to the boiler via flexible armored hose line with heat protection prevents vibration breakage
High quality drive belt
Powerful and economical drive
The toothed drive belt facilitates start-up, improves running smoothness and power transmission and reduces power consumption by up to 30%.
Sturdy metal belt guard
Comfort safety coupling - The advantages.
Comfort safety couplings from AIRCRAFT as the first manufacturer to be used in series production
Two separate locking systems for maximum working safety
Dangerous whipping of the hose line is prevented
Comfortable and safe to transport and set up
Ergonomically extended handle for comfortable transport in an almost upright position - strain on the back due to lifting is avoided
Puncture-proof PU foam wheels and stable steering chassis with parking brake allow easy transport
The parking brake prevents both turning and rolling movement of the wheels and ensures optimal standing of the compressor
Practical second transport handle on the boiler, which facilitates carrying the compressor
High quality boiler with durable rust protection
AIRCRAFT is the first manufacturer to equip the AIRPROFI series compressors with hot-dip galvanized tanks inside and outside as standard
AIRPROFI series boilers therefore come with a 15-year warranty against rust-through.
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
When producing and conditioning compressed air, condensate inevitably accumulates, oily and frequently polluted with dirt particles. Since condensate accumulates irregularly depending on the year and time of day or load of the compressor, the BEKOMAT® with its capacitive sensor often pays for itself over time-controlled drain valves within half a year. Features and Benefits:
Usable and resistant to oily and oil-free, aggressive condensates
Easy connection to filter or boiler by adapting the inlet nozzle with horizontal or vertical condensate inlet
With discharge with BEKOMAT® improved function with oil / water separators
BEKOMAT® 32 with alarm function and switchable fault message
function Description
Condensate collects in the collection container of the arrester.
A capacitive sensor detects the level of the condensate. At maximum level, a diaphragm opens, through which the condensate is discharged through the system pressure.
The membrane is closed before compressed air can escape
The advantages at a glance
No unnecessary compressed air losses
Derivation according to the amount of seizure
Sensor detects every type of condensate
Insensitive to dirt
simple electrical installation (230 V)
Low maintenance
Including service unit
Economical: Complete replacement of all wearing parts and pressure-bearing parts with just one handle.
no electrical installation required during maintenance
no assembly of seals and individual parts
Only one spare part, factory pressure and function tested
EasyTRONIC MICRO II electronic control with pressure sensor operation as standard, thus preventing motor overload, reducing wear and extending service life
With star-delta switch
High cooling effect and lower noise level due to thermostatically controlled radial fan
Operating hours counter records load and overrun times, thus ensuring compliance with maintenance intervals - Indication of maintenance requirement via automatic message
Rotation direction control for the motor avoids possible damage during commissioning or after a change of location
Screw compressor with wear-resistant Poly V ribbed belt drive and carriage tensioning system
Easy maintenance due to easily accessible elements
Optimum operating temperatures due to thermostatically controlled fan, optimum cooling air flow and generously dimensioned heat exchanger, thus longer service life, lower fluctuations in oil temperature than with thermostat control
Aftercooler as standard, thus less effort for drying and filtration of the generated compressed air
Small external dimensions, thus easy transport and installation
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Innovative LOGIN control with 4.3" touch screen for easy operation and complete control over all functions
Connection of up to eight compressors possible, no matter if with constant or variable speed
All information on current operating status at a glance
Rotation direction control for the motor, prevents damage during start-up or after a change of location
Low noise emission (only max. 67 dB) during operation, due to extremely low speed of the screw compressor and use of a low-noise radial fan
Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled centrifugal fan, optimum cooling air flow and generously dimensioned heat exchangers
Aftercooler reduces the effort for drying and filtration of the generated compressed air
Star-delta switching as standard
Easy to service: simple removal and installation of all components requiring maintenance
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Drying by partial vapor pressure compensation of water vapor by diffusion in combination with a highly selective membrane
No change in the compressed air composition - can be used for breathing air treatment
Efficient
Reaches the required pressure dew point with low energy consumption
Very fast availability of dried compressed air
Filtration and drying compact in one device
Robust
Housing made of seawater-resistant aluminum
Low-maintenance, currentless technology
System-compatible
Modularly combinable with CLEARPOINT Filter program
Can be used anywhere along the compressed air treatment chain - can also be integrated into system technology
The ultimate membrane dryer technology with integrated nanofilter
Filtration and drying in one housing (simple filter element change)
Low purge air requirement (Twist 60 technology)
Availability of dried compressed air immediately without running-in phase
Safe drying due to the high partial vapor pressure gradient
No change in the compressed air temperature and composition
Proven 100,000 times
Maintenance-free (except filter element change)
For diverse applications, including for breathing air treatment
Also ideal for use directly behind the compressor / aftercooler
Optionally also for higher loads (assembly potting, 16 bar, 70°C)
For a reliable function of the DRYPOINT M membrane dryer must meet the following requirements:
The incoming compressed air must not contain any liquid condensate
Particles larger than 1 μm must be separated before the membrane dryer
The oil content of the compressed air must not exceed 0.01 mg/m³.
DRYPOINT M membrane dryers have been an alternative to existing ones for years Compressed air drying process proven.
Advantages DRYPOINT M PLUS
Proven process of highest reliability and functional safety
Immediate availability of dry compressed air, even when working discontinuously
Low purge air requirement, compressed air drying can be adjusted to the application
Compact and robust, small space requirement due to low overall height
Compressed air inlet and outlet on one level (filter version), easy to combine with CLEARPOINT filters
Maintenance and wear-free as there are no moving parts
No reduction in the oxygen content, therefore also suitable for breathing air treatment
No electrical connection, also suitable for Ex areas
Long service life in case of use of CLEARPOINT filters
Environmentally friendly, does not require CFCs / CFC-containing refrigerants or adsorbents
Complete solution: filtration and dryer in a compact form, integration of drain pipe
Filtration at the point in the treatment chain where the highest efficiency is achieved
Easy maintenance / replacement of filter element as with a regular filter
Filter element: N (nanofilter)
The CLEARPOINT filter element type N is used to separate solid particles down to 0.01 micron, water and oil aerosols . The element has a multi-stage structure for efficient and long-lasting filtering. In the first stage, coarse particles are retained by a pre-filter layer. In the second stage, finer particles are absorbed by a depth filter bed made of high-performance borosilicate fiber fabric. Due to the very large cavity volume of the filter medium (96%), a very high dirt holding capacity is achieved. The filter medium is specially impregnated in order to avoid cross-sectional swelling of the individual fibers.
Trap: Float trap
The basic version includes a float drain.
Size 10 - 40
This size is for the demand-oriented compressed air drying of medium volume flows configured. Different levels of drying of the compressed air are achieved through different purge air settings.
EasyTRONIC MICRO II electronic control with pressure sensor operation as standard, thus preventing motor overload, reducing wear and extending service life
With star-delta switch
High cooling effect and lower noise level due to thermostatically controlled radial fan
Operating hours counter records load and overrun times, thus ensuring compliance with maintenance intervals - Indication of maintenance requirement via automatic message
Rotation direction control for the motor avoids possible damage during commissioning or after a change of location
Screw compressor with wear-resistant Poly V ribbed belt drive and slide clamping system
Easy maintenance due to easily accessible elements
Optimum operating temperatures due to thermostatically controlled fan, optimum cooling air flow and generously dimensioned heat exchanger, thus longer service life, lower fluctuations in oil temperature than with thermostat control
Aftercooler as standard, thus less effort for drying and filtration of the generated compressed air
Small external dimensions, thus easy transport and installation
Fifteen-year warranty against rusting through on the inside and outside of hot-dip galvanized compressed air tanks
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Innovative LOGIN control with 4.3" touch screen for easy operation and complete control over all functions
Connection of up to eight compressors possible, no matter if with constant or variable speed
All information on current operating status at a glance
Rotation direction control for the motor, prevents damage during start-up or after a change of location
Low noise emission (only max. 67 dB) during operation, due to extremely low speed of the screw compressor and use of a low-noise radial fan
Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled centrifugal fan, optimum cooling air flow and generously dimensioned heat exchangers
Aftercooler reduces the effort for drying and filtration of the generated compressed air
Service-friendly: easy removal and installation of all components requiring maintenance
Energy saving through frequency control
Ideal for frequently changing compressed air consumption
Compressor delivery rate adjusts to actual consumption
Electronic control monitors motor and compressor speed and keeps line pressure constant even when consumption fluctuates widely
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
