NEO TOOLS' 25 mm diameter bi-metal hole saw 57-908 allows precise drilling of holes with a maximum depth of up to 38 mm. Equipped with teeth with a 6/4 TPI pitch, it is suitable for working with various materials. Maximum speeds are: steel - 350 rpm, copper - 470 rpm, aluminium - 525 rpm, stainless steel - 175 rpm, plastic - 2000 rpm, wood - 2700 rpm. This is a versatile tool for professional and amateur use.
The 80 mm widia hole saw with SDS+ adapter and pilot drill 55H322 by GRAPHITE characterised by a hole saw diameter of 80 mm, a height of 72 mm and a drilling depth of 50 mm. It is equipped with 10 widia with a width of 2.2 mm. The internal diameter is 74 mm and the fi drill parameters are 8 x 110 mm. The length of the entire set is 163 mm. The GRAPHITE brand hole saw is offered in a set with an SDS+ adapter and a pilot drill bit. It has hammer drilling capability and is also designed for drilling holes in concrete and brick. It makes it possible to prepare holes for installation boxes. The fine-grain carbide blades with increased wear resistance extend the life of the tool. The hole saw will prove useful in the professions of builders, DIY enthusiasts and electricians.
Diamond hole saw for drill rig 58G540 62 × 450 mm × 6T, 57-859 by NEO TOOLS is a hole saw designed for diamond drill rig with part number 58G540 GRAPHITE. The accessory is characterised by a diameter of 62 mm and a working height of 420 mm and a total height of 450 mm. It has 6T teeth with a height of 10 mm and a 1.1/4 UNC thread. The NEO TOOLS brand hole saw is made of robust steel. It has a seamless tube and laser-welded teeth. It will be indispensable when working with concrete, reinforced concrete, ceramics, granite or asphalt. Recommended for professional use as well as for a variety of DIY tasks.
GRAPHITE's 53mm 56T740 tungsten tipped hole saw is designed for use in brick, hollow block, cellular concrete, plasterboard and lightweight building materials. It has a height of 68mm and provides a drilling depth of 57mm. The cutting edge of the hole saw is coated with a tungsten carbide coating and has a maximum speed of 1,200 rpm. The tool is designed for use with the 56T744 tungsten carbide hole saw blade and 56T745 pilot drill. It can be used for any installation work, such as fitting power sockets, distribution boxes or pipes. It can also be used for cable conduit pipes, ventilation pipes or installation fans in the kitchen or bathroom.
GRAPHITE's 33mm 56T738 tungsten tipped hole saw is designed for use in brick, hollow block, cellular concrete, plasterboard and lightweight building materials. It has a height of 68mm and provides a drilling depth of 57mm. The cutting edge of the hole saw is coated with a tungsten carbide coating and has a maximum speed of 1,200 rpm. The tool is designed for use with the 56T744 tungsten carbide hole saw blade and 56T745 pilot drill. It can be used for any installation work, such as fitting power sockets, distribution boxes or pipes. It can also be used for cable conduit pipes, ventilation pipes or installation fans in the kitchen or bathroom.
GRAPHITE's 19mm bi-metal hole saw 56T702 is 51mm high and allows drilling to a depth of 38mm. It is made from HSS high speed steel and is fitted with a 1/2'' x 20 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T753 adapter with pilot drill bit for bi-metal hole saws in the 14-30 mm range. Maximum speeds for this tool, vary depending on the material: steel - 460 rpm, Inox steel - 230 rpm, aluminium - 690 rpm, wood - 680 rpm, cast iron - 300 rpm, brass - 600 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.
With a height of 44 mm, GRAPHITE's 64 mm bi-metal hole saw 56T714 allows drilling to a depth of 38 mm. It is made from HSS high speed steel and is fitted with a 5/8'' x 18 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T754 adapter with pilot drill bit for bi-metal holesaws in the 32-152 mm range. Maximum speeds for this tool, vary depending on the material: steel - 135 rpm, Inox steel - 65 rpm, aluminium - 205 rpm, wood - 180 rpm, cast iron - 90 rpm, brass - 180 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.
GRAPHITE's 6.35mm pilot drill adapter for bi-metal holesaws 32-152mm, Hex 56T754 is designed for bi-metal holesaws with diameters from 32 to 152mm. It has a 7/16" HEX shank. The pilot drill bit is made of HSS material. The adapter is used when drilling in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The set includes a screw-mounted guide drill bit. The GRAPHITE brand adapter is designed for mounting bi-metal holesaws in drills.
The 40 mm bi-metal hole saw 56T709 by GRAPHITE, with a height of 44 mm, allows drilling to a depth of 38 mm. It is made from HSS high speed steel and is fitted with a 5/8'' x 18 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T754 adapter with pilot drill bit for bi-metal holesaws in the 32-152 mm range. Maximum speeds for this tool, vary depending on the material: steel - 220 rpm, Inox steel - 110 rpm, aluminium - 330 rpm, wood - 290 rpm, cast iron - 145 rpm, brass - 290 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.
GRAPHITE's 30mm 56T734 diamond hole saw has a brazed diamond blank and a cylindrical shank. It is designed for efficient drilling in stoneware, ceramics, glass and brick. It can work either wet or dry, and the drilling itself is done without impact. The maximum speed of the hole saw is 3000 rpm, while its maximum drilling depth is 30 mm. The GRAPHITE-branded tool is designed for drilling with a drill or a screwdriver.
Wood hole saws 26 - 63 mm, h 25 mm, set of 7 pieces 56T749 by GRAPHITE is a set containing 7 pieces with diameters: 26, 32, 38, 45, 50, 56 and 63 mm. The height of each hole saw is 25 mm and the maximum drilling depth is 18 mm. The maximum rotational speed is 1500 rpm. The product is designed for drilling in wood, plasterboard and plastic.
GRAPHITE's 20mm 56T732 diamond hole saw has a brazed diamond blank and a cylindrical shank. It is designed for efficient drilling in stoneware, ceramics, glass and brick. It can work either wet or dry, and the drilling itself is done without impact. The maximum speed of the hole saw is 3000 rpm, while its maximum drilling depth is 30 mm. The GRAPHITE-branded tool is designed for drilling with a drill or a screwdriver.
Wood hole saws with adapter 19 - 64 mm, set of 12 pcs. 56T748 by GRAPHTE is a set of wood hole saws with adapter, which includes eight pieces with diameters from 19 to 64 mm, allowing holes up to 25 mm deep. The set also includes an Allen spanner, adapters with a 7.8 and 9.5 mm shank and a 6 mm diameter centre drill bit. GRAPHITE holesaws are suitable for working in wood, plasterboard and plastic, with a maximum speed of 2,000 rpm.
GRAPHITE's 32mm bi-metal hole saw 56T707 is 51mm high and allows drilling to a depth of 38mm. It is made from HSS high speed steel and is fitted with a 5/8'' x 18 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T754 adapter with pilot drill bit for bi-metal holesaws in the 32-152 mm range. Maximum speeds for this tool, vary depending on the material: steel - 275 rpm, Inox steel - 140 rpm, aluminium - 410 rpm, wood - 370 rpm, cast iron - 180 rpm, brass - 360 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.
GRAPHITE's 10mm 56T728 diamond hole saw has a brazed diamond blank and a cylindrical shank. It is designed for efficient drilling in stoneware, ceramics, glass and brick. It can work either wet or dry, and the drilling itself is done without impact. The maximum speed of the hole saw is 3000 rpm, while its maximum drilling depth is 30 mm. The GRAPHITE-branded tool is designed for drilling with a drill or a screwdriver.
GRAPHITE's 16mm 56T731 diamond hole saw has a brazed diamond blank and a cylindrical shank. It is designed for efficient drilling in stoneware, ceramics, glass and brick. It can work either wet or dry, and the drilling itself is done without impact. The maximum speed of the hole saw is 3000 rpm, while its maximum drilling depth is 30 mm. The GRAPHITE-branded tool is designed for drilling with a drill or a screwdriver.
Wood hole saws 60 - 95 mm, h 40 mm, set of 5 pieces 56T746 by GRAPHITE is a set containing 5 pieces with diameters: 60, 67, 74, 81, 95 mm. The height of each hole saw is 40 mm and the maximum drilling depth is 32 mm. The maximum rotational speed is 1500 rpm. The product is designed for drilling in wood, plasterboard and plastic.
Diamond drill bits 4-12 mm with guide, set of 8 pieces 56T737 by GRAPHITE contains a set of diamond drill bits with diameters: 4, 5, 6, 7, 8, 10 and 12 mm, made with a diamond coating. The tools are designed for a maximum speed of 2500 rpm and a drilling depth of up to 35 mm. The kit comes with a guide with a practical suction cup for drilling and with 7 holes with diameters: 4, 5, 6, 7, 8, 10 and 12 mm. The GRAPHITE branded set consists of 8 components that are indispensable when renovating - it is suitable for wet and dry work with terracotta, stone, porcelain stoneware, glass and ceramic tiles.
GRAPHITE's 41mm bi-metal hole saw 56T710 is 44mm high and allows drilling to a depth of 38mm. It is made from HSS high speed steel and is fitted with a 5/8'' x 18 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T754 adapter with pilot drill bit for bi-metal holesaws in the 32-152 mm range. Maximum speeds for this tool, vary depending on the material: steel - 210 rpm, Inox steel - 105 rpm, aluminium - 315 rpm, wood - 230 rpm, cast iron - 140 rpm, brass - 280 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.
Hole saws with adapter, 32-54 mm, set of 6 pieces 56T722 by GRAPHITE contains six pieces. The set includes holesaws with diameters: 32 mm, 38 mm, 51 mm and 54 mm. Included - an adapter with a 6 mm diameter pilot drill bit and an Allen spanner, allow for wider use. The height of each hole saw is 28 mm and the drilling depth is 25 mm. Maximum speed during operation is 1100 rpm. The GRAPHITE branded set is designed for drilling holes in wood, plastic and plasterboard using a drill or drill/driver.
