AIRCRAFT AAD 120 adsorptsioonkuivati tagab kuni 120 m³/h suruõhu tõhusa kuivatamise ning saavutab-40 °C rõhukastepunkti. Nutikas elektrooniline juhtimine, energiasäästlik regenereerimissüsteem ja Modbus-ühilduvus muudavad selle töökindlaks lahenduseks tööstuslikele suruõhusüsteemidele, kus on oluline maksimaalne suruõhu kvaliteet ja süsteemi töökindlus.
Drying by partial vapor pressure compensation of water vapor by diffusion in combination with a highly selective membrane
No change in the compressed air composition - can be used for breathing air treatment
Efficient
Reaches the required pressure dew point with low energy consumption
Very fast availability of dried compressed air
Filtration and drying compact in one device
Robust
Housing made of seawater-resistant aluminum
Low-maintenance, currentless technology
System-compatible
Modularly combinable with CLEARPOINT Filter program
Can be used anywhere along the compressed air treatment chain - can also be integrated into system technology
The ultimate membrane dryer technology with integrated nanofilter
Filtration and drying in one housing (simple filter element change)
Low purge air requirement (Twist 60 technology)
Availability of dried compressed air immediately without running-in phase
Safe drying due to the high partial vapor pressure gradient
No change in the compressed air temperature and composition
Proven 100,000 times
Maintenance-free (except filter element change)
For diverse applications, including for breathing air treatment
Also ideal for use directly behind the compressor / aftercooler
Optionally also for higher loads (assembly potting, 16 bar, 70°C)
For a reliable function of the DRYPOINT M membrane dryer must meet the following requirements:
The incoming compressed air must not contain any liquid condensate
Particles larger than 1 μm must be separated before the membrane dryer
The oil content of the compressed air must not exceed 0.01 mg/m³.
DRYPOINT M membrane dryers have been an alternative to existing ones for years Compressed air drying process proven.
Advantages DRYPOINT M PLUS
Proven process of highest reliability and functional safety
Immediate availability of dry compressed air, even when working discontinuously
Low purge air requirement, compressed air drying can be adjusted to the application
Compact and robust, small space requirement due to low overall height
Compressed air inlet and outlet on one level (filter version), easy to combine with CLEARPOINT filters
Maintenance and wear-free as there are no moving parts
No reduction in the oxygen content, therefore also suitable for breathing air treatment
No electrical connection, also suitable for Ex areas
Long service life in case of use of CLEARPOINT filters
Environmentally friendly, does not require CFCs / CFC-containing refrigerants or adsorbents
Complete solution: filtration and dryer in a compact form, integration of drain pipe
Filtration at the point in the treatment chain where the highest efficiency is achieved
Easy maintenance / replacement of filter element as with a regular filter
Filter element: N (nanofilter)
The CLEARPOINT filter element type N is used to separate solid particles down to 0.01 micron, water and oil aerosols . The element has a multi-stage structure for efficient and long-lasting filtering. In the first stage, coarse particles are retained by a pre-filter layer. In the second stage, finer particles are absorbed by a depth filter bed made of high-performance borosilicate fiber fabric. Due to the very large cavity volume of the filter medium (96%), a very high dirt holding capacity is achieved. The filter medium is specially impregnated in order to avoid cross-sectional swelling of the individual fibers.
Trap: Float trap
The basic version includes a float drain.
Size 10 - 40
This size is for the demand-oriented compressed air drying of medium volume flows configured. Different levels of drying of the compressed air are achieved through different purge air settings.
AIRCRAFT ASD 480 suruõhu külmkuivati kuivatab kuni 8000 l/min suruõhku ning aitab vähendada energiakulusid tänu patenteeritud glükooltehnoloogiale. Töökindel lahendus professionaalsetele suruõhusüsteemidele, kus on oluline kuiv ja kvaliteetne suruõhk ning madalad kasutuskulud.
Tehnilised andmed:
Mudel: ASD 480
Tootjakood: 2041850
Tüüp: suruõhu külmkuivati
Maksimaalne õhuvool: 8000 l/min
Õhu tootlikkus: 480 m³/h
Maksimaalne töörõhk: 16 bar
Õhuühendus: 1½"
Elektrivõimsus: 1,28 kW
Maksimaalne siseneva suruõhu temperatuur: 60 °C
Maksimaalne ümbritseva keskkonna temperatuur: 50 °C
Integrated DRYPOINT M Plus solution: filtration and dryer in a compact form, as well as condensate drain integrated
Filtration on the spot in the treatment chain where the highest efficiency is achieved
Easy maintenance / replacement of filter element as with a filter
Application-specific degree of dryness can be selected
Consistent compressed air quality under fluctuating operating conditions
Energy saving through minimization of purging air consumption for actual amount of useful air and degree of drying
Power evaluation via LED, forwarding via current output 4 … 20 mA possible
User-friendly: Easy to use, test functions, error messages
Concept based on the fail-safe principle, error message can be picked up via potential-free contact
Functionality of the DRYPOINT® M eco control
Based on the measurement result from the sensor, the control software decides in defined cycles whether and how long the full amount of purge air has to be provided to achieve and stabilize the required degree of dryness. This process is implemented by means of a targeted clocking of a solenoid valve. In each cycle, the duration of the two process sections described below varies in order to keep the degree of drying within the specified tolerance range.
Drying by partial vapor pressure compensation of water vapor by diffusion in combination with a highly selective membrane
No change in the compressed air composition - can be used for breathing air treatment
Efficient
Reaches the required pressure dew point with low energy consumption
Very fast availability of dried compressed air
Filtration and drying compact in one device
Robust
Housing made of seawater-resistant aluminum
Low-maintenance, currentless technology
System-compatible
Modularly combinable with CLEARPOINT Filter program
Can be used anywhere along the compressed air treatment chain - can also be integrated into system technology
The ultimate membrane dryer technology with integrated nanofilter
Filtration and drying in one housing (simple filter element change)
Low purge air requirement (Twist 60 technology)
Availability of dried compressed air immediately without running-in phase
Safe drying due to the high partial vapor pressure gradient
No change in the compressed air temperature and composition
Proven 100,000 times
Maintenance-free (except filter element change)
For diverse applications, including for breathing air treatment
Also ideal for use directly behind the compressor / aftercooler
Optionally also for higher loads (assembly potting, 16 bar, 70°C)
For a reliable function of the DRYPOINT M membrane dryer must meet the following requirements:
The incoming compressed air must not contain any liquid condensate
Particles larger than 1 μm must be separated before the membrane dryer
The oil content of the compressed air must not exceed 0.01 mg/m³.
DRYPOINT M membrane dryers have been an alternative to existing ones for years Compressed air drying process proven.
Advantages DRYPOINT M PLUS
Proven process of highest reliability and functional safety
Immediate availability of dry compressed air, even when working discontinuously
Low purge air requirement, compressed air drying can be adjusted to the application
Compact and robust, small space requirement due to low overall height
Compressed air inlet and outlet on one level (filter version), easy to combine with CLEARPOINT filters
Maintenance and wear-free as there are no moving parts
No reduction in the oxygen content, therefore also suitable for breathing air treatment
No electrical connection, also suitable for Ex areas
Long service life in case of use of CLEARPOINT filters
Environmentally friendly, does not require CFCs / CFC-containing refrigerants or adsorbents
Complete solution: filtration and dryer in a compact form, integration of drain pipe
Filtration at the point in the treatment chain where the highest efficiency is achieved
Easy maintenance / replacement of filter element as with a regular filter
Filter element: N (nanofilter)
The CLEARPOINT filter element type N is used to separate solid particles down to 0.01 micron, water and oil aerosols . The element has a multi-stage structure for efficient and long-lasting filtering. In the first stage, coarse particles are retained by a pre-filter layer. In the second stage, finer particles are absorbed by a depth filter bed made of high-performance borosilicate fiber fabric. Due to the very large cavity volume of the filter medium (96%), a very high dirt holding capacity is achieved. The filter medium is specially impregnated in order to avoid cross-sectional swelling of the individual fibers.
Trap: Float trap
The basic version includes a float drain.
Size 10 - 40
This size is for the demand-oriented compressed air drying of medium volume flows configured. Different levels of drying of the compressed air are achieved through different purge air settings.
ASD 300 energiasäästlik suruõhu külmkuivati patenteeritud 3-ahelalise soojusvaheti ja glükooljahutusega. Õhuvooluhulk kuni 5000 l/min, maksimaalne töörõhk 16 bar ning elektrooniline kondensaadieraldaja tagavad kuiva ja kvaliteetse suruõhu.
Tehnilised andmed:
Tüüp: suruõhu külmkuivati
Õhuvooluhulk: 5000 l/min
Õhuvooluhulk: 300 m³/h
Maksimaalne töörõhk: 16 bar
Õhuühendus: 1"
Võimsustarve: 0,92 kW
Maksimaalne sissetuleva suruõhu temperatuur: 60 °C
Drying by partial vapor pressure compensation of water vapor by diffusion in combination with a highly selective membrane
No change in the compressed air composition - can be used for breathing air treatment
Efficient
Reaches the required pressure dew point with low energy consumption
Very fast availability of dried compressed air
Filtration and drying compact in one device
Robust
Housing made of seawater-resistant aluminum
Low-maintenance, currentless technology
System-compatible
Modularly combinable with CLEARPOINT Filter program
Can be used anywhere along the compressed air treatment chain - can also be integrated into system technology
The ultimate membrane dryer technology with integrated nanofilter
Filtration and drying in one housing (simple filter element change)
Low purge air requirement (Twist 60 technology)
Availability of dried compressed air immediately without running-in phase
Safe drying due to the high partial vapor pressure gradient
No change in the compressed air temperature and composition
Proven 100,000 times
Maintenance-free (except filter element change)
For diverse applications, including for breathing air treatment
Also ideal for use directly behind the compressor / aftercooler
Optionally also for higher loads (assembly potting, 16 bar, 70°C)
For a reliable function of the DRYPOINT M membrane dryer must meet the following requirements:
The incoming compressed air must not contain any liquid condensate
Particles larger than 1 μm must be separated before the membrane dryer
The oil content of the compressed air must not exceed 0.01 mg/m³.
DRYPOINT M membrane dryers have been an alternative to existing ones for years Compressed air drying process proven.
Advantages DRYPOINT M PLUS
Proven process of highest reliability and functional safety
Immediate availability of dry compressed air, even when working discontinuously
Low purge air requirement, compressed air drying can be adjusted to the application
Compact and robust, small space requirement due to low overall height
Compressed air inlet and outlet on one level (filter version), easy to combine with CLEARPOINT filters
Maintenance and wear-free as there are no moving parts
No reduction in the oxygen content, therefore also suitable for breathing air treatment
No electrical connection, also suitable for Ex areas
Long service life in case of use of CLEARPOINT filters
Environmentally friendly, does not require CFCs / CFC-containing refrigerants or adsorbents
Complete solution: filtration and dryer in a compact form, integration of drain pipe
Filtration at the point in the treatment chain where the highest efficiency is achieved
Easy maintenance / replacement of filter element as with a regular filter
Filter element: N (nanofilter)
The CLEARPOINT filter element type N is used to separate solid particles down to 0.01 micron, water and oil aerosols . The element has a multi-stage structure for efficient and long-lasting filtering. In the first stage, coarse particles are retained by a pre-filter layer. In the second stage, finer particles are absorbed by a depth filter bed made of high-performance borosilicate fiber fabric. Due to the very large cavity volume of the filter medium (96%), a very high dirt holding capacity is achieved. The filter medium is specially impregnated in order to avoid cross-sectional swelling of the individual fibers.
Trap: Float trap
The basic version includes a float drain.
Size 10 - 40
This size is for the demand-oriented compressed air drying of medium volume flows configured. Different levels of drying of the compressed air are achieved through different purge air settings.
AD 280 suruõhu külmkuivati tagab kuiva ja puhta suruõhu kuni 4666 l/min tootlikkusega. Integreeritud automaatne kondensaadi äravool, energiasäästlik kiirusreguleeritav ventilaator ning maksimaalne töörõhk 16 bar. Sobib nõudlikele tööstuslikele suruõhusüsteemidele.
Tehnilised andmed:
Tüüp: suruõhu külmkuivati
Õhuvooluhulk: 4666 l/min
Õhuvooluhulk: 280 m³/h
Maksimaalne töörõhk: 16 bar
Õhuühendus: 1"
Võimsustarve: 0,6 kW
Mõõdud (P × L × K): 485 × 595 × 614 mm
Netokaal: 59 kg
Sisseehitatud automaatne kondensaadi äravool
Kiirusreguleeritav jahutusventilaator (0-100%)
Juhtseade kuvab ja salvestab 5 erinevat häireolekut
Külmakompressor lülitub välja alla 15 °C ümbritseva temperatuuri korral, kui suruõhuvool puudub
Konstantne rõhukastepunkt väiksema kulumise ja stabiilse töö tagamiseks
Integrated DRYPOINT M Plus solution: filtration and dryer in a compact form, as well as condensate drain integrated
Filtration on the spot in the treatment chain where the highest efficiency is achieved
Easy maintenance / replacement of filter element as with a filter
Application-specific degree of dryness can be selected
Consistent compressed air quality under fluctuating operating conditions
Energy saving through minimization of purging air consumption for actual amount of useful air and degree of drying
Power evaluation via LED, forwarding via current output 4 … 20 mA possible
User-friendly: Easy to use, test functions, error messages
Concept based on the fail-safe principle, error message can be picked up via potential-free contact
Functionality of the DRYPOINT® M eco control
Based on the measurement result from the sensor, the control software decides in defined cycles whether and how long the full amount of purge air has to be provided to achieve and stabilize the required degree of dryness. This process is implemented by means of a targeted clocking of a solenoid valve. In each cycle, the duration of the two process sections described below varies in order to keep the degree of drying within the specified tolerance range.
AIRCRAFT DRYPOINT M PLUS 20-53A membraankuivati ühendab suruõhu filtreerimise ja kuivatamise ühes kompaktses seadmes. Integreeritud nanofilter, kohene valmisolek ning elektritoidet mittevajav töö muudavad selle ideaalseks lahenduseks rakendustesse, kus on oluline kuiv, puhas ja töökindel suruõhk.
Tehnilised andmed:
Üldandmed:
Puhastusõhu kulu 7 bar rõhu juures: 80 l/min
Maksimaalne töörõhk: 12,5 bar
Õhuühendus: G 3/4"
Mõõtmed ja kaal:
Laius (B): 100 mm
Läbimõõt (D): 80 mm
Kõrgus (A): 637 mm
Netokaal: 3,8 kg
Sisendõhu vooluhulk vastavalt kastepunkti vähendamisele:
Kastepunkti muutusSisendõhu vooluhulk
+35 °C → +15 °C 800 l/min
+5 °C → -7 °C 800 l/min
+35 °C → +3 °C 532 l/min
+5 °C → -17 °C 532 l/min
+35 °C → -10 °C 396 l/min
+5 °C → -26 °C 396 l/min
+35 °C → -20 °C 338 l/min
+5 °C → -33 °C 338 l/min
Märkus:
Toodud vooluhulgad kehtivad 7 baari töörõhu korral. Töörõhu muutumisel tuleb kasutada tootja poolt ette nähtud korrigeerimistegureid.
Aircraft AD 72 on tõhus suruõhu külmkuivati, mis eemaldab suruõhust niiskuse ning kaitseb pneumaatilisi tööriistu, masinaid ja suruõhusüsteeme korrosiooni ning kondensaadi põhjustatud kahjustuste eest. Tänu energiasäästlikule konstruktsioonile ja elektrooniliselt juhitavale jahutusventilaatorile tagab seade stabiilse töö ning madalad kasutuskulud.
AD 180 suruõhu külmkuivati tagab kuiva ja kvaliteetse suruõhu. Õhuvool kuni 3000 l/min, läbilaskevõime 180 m³/h ja töörõhk kuni 16 bar. Integreeritud kondensaadi äravool ning energiasäästlik töö.
Tehnilised andmed:
Seadme tüüp: suruõhu külmkuivati
Õhuvool: 3000 l/min
Õhu läbilaskevõime: 180 m³/h
Maksimaalne töörõhk: 16 bar
Õhuühendus: 3/4"
Energiatarve: 0,4–0,7 kW
Mõõtmed (P × L × K): 395 × 486 × 565 mm
Netokaal: 36 kg
Jahutusventilaator: 0–100% kiirusjuhtimisega
Automaatne kondensaadi äravool: jah
Alarmisüsteem: kuvab ja salvestab 5 erinevat häireolekut
Minimaalne töötemperatuur ilma õhuvooluta: külmaainekompressor lülitub välja alla 15 °C juures
Integrated DRYPOINT M Plus solution: filtration and dryer in a compact form, as well as condensate drain integrated
Filtration on the spot in the treatment chain where the highest efficiency is achieved
Easy maintenance / replacement of filter element as with a filter
Application-specific degree of dryness can be selected
Consistent compressed air quality under fluctuating operating conditions
Energy saving through minimization of purging air consumption for actual amount of useful air and degree of drying
Power evaluation via LED, forwarding via current output 4 … 20 mA possible
User-friendly: Easy to use, test functions, error messages
Concept based on the fail-safe principle, error message can be picked up via potential-free contact
Functionality of the DRYPOINT® M eco control
Based on the measurement result from the sensor, the control software decides in defined cycles whether and how long the full amount of purge air has to be provided to achieve and stabilize the required degree of dryness. This process is implemented by means of a targeted clocking of a solenoid valve. In each cycle, the duration of the two process sections described below varies in order to keep the degree of drying within the specified tolerance range.
AIRCRAFT AAD 160 adsorptsioonkuivati tagab kuni 160 m³/h suruõhu tõhusa kuivatamise ning saavutab-40 °C rõhukastepunkti, kaitstes suruõhusüsteeme niiskusest põhjustatud rikete eest. Nutikas elektrooniline juhtimine, energiasäästlik regenereerimissüsteem ja Modbus-ühilduvus muudavad selle ideaalseks lahenduseks suure jõudlusega tööstuslikele suruõhusüsteemidele.
AIRCRAFT AAD 25 adsorptsioonkuivati tagab usaldusväärse ja niiskusvaba suruõhu kuni 25 m³/h õhuvooluhulga juures. Tänu-40 °C rõhukastepunktile, elektroonilisele juhtimisele ja kompaktsele konstruktsioonile on see ideaalne lahendus professionaalsetele suruõhusüsteemidele, kus on oluline kõrge suruõhu kvaliteet ja töökindlus.
AD 340 suruõhu külmkuivati tagab kuiva ja puhta suruõhu kuni 5666 l/min tootlikkusega. Integreeritud automaatne kondensaadi äravool, kiirusreguleeritav jahutusventilaator ning maksimaalne töörõhk 16 bar. Ideaalne lahendus tööstuslikele suruõhusüsteemidele.
Tehnilised andmed:
Tüüp: suruõhu külmkuivati
Õhuvooluhulk: 5666 l/min
Õhuvooluhulk: 340 m³/h
Maksimaalne töörõhk: 16 bar
Õhuühendus: 1"
Võimsustarve: 0,73 kW
Toitepinge: 230 V / 50 Hz
Mõõdud (P × L × K): 485 × 595 × 614 mm
Netokaal: 62 kg
Sisseehitatud automaatne kondensaadi äravool
Kiirusreguleeritav jahutusventilaator (0-100%)
Juhtseade kuvab ja salvestab 5 erinevat häireolekut
Külmakompressor lülitub välja alla 15 °C ümbritseva temperatuuri korral, kui suruõhuvool puudub
Konstantne rõhukastepunkt stabiilse töö ja väiksema kulumise tagamiseks
Integrated DRYPOINT M Plus solution: filtration and dryer in a compact form, as well as condensate drain integrated
Filtration on the spot in the treatment chain where the highest efficiency is achieved
Easy maintenance / replacement of filter element as with a filter
Application-specific degree of dryness can be selected
Consistent compressed air quality under fluctuating operating conditions
Energy saving through minimization of purging air consumption for actual amount of useful air and degree of drying
Power evaluation via LED, forwarding via current output 4 … 20 mA possible
User-friendly: Easy to use, test functions, error messages
Concept based on the fail-safe principle, error message can be picked up via potential-free contact
Functionality of the DRYPOINT® M eco control
Based on the measurement result from the sensor, the control software decides in defined cycles whether and how long the full amount of purge air has to be provided to achieve and stabilize the required degree of dryness. This process is implemented by means of a targeted clocking of a solenoid valve. In each cycle, the duration of the two process sections described below varies in order to keep the degree of drying within the specified tolerance range.
Drying by partial vapor pressure compensation of water vapor by diffusion in combination with a highly selective membrane
No change in the compressed air composition - can be used for breathing air treatment
Efficient
Reaches the required pressure dew point with low energy consumption
Very fast availability of dried compressed air
Filtration and drying compact in one device
Robust
Housing made of seawater-resistant aluminum
Low-maintenance, currentless technology
System-compatible
Modularly combinable with CLEARPOINT Filter program
Can be used anywhere along the compressed air treatment chain - can also be integrated into system technology
The ultimate membrane dryer technology with integrated nanofilter
Filtration and drying in one housing (simple filter element change)
Low purge air requirement (Twist 60 technology)
Availability of dried compressed air immediately without running-in phase
Safe drying due to the high partial vapor pressure gradient
No change in the compressed air temperature and composition
Proven 100,000 times
Maintenance-free (except filter element change)
For diverse applications, including for breathing air treatment
Also ideal for use directly behind the compressor / aftercooler
Optionally also for higher loads (assembly potting, 16 bar, 70°C)
For a reliable function of the DRYPOINT M membrane dryer must meet the following requirements:
The incoming compressed air must not contain any liquid condensate
Particles larger than 1 μm must be separated before the membrane dryer
The oil content of the compressed air must not exceed 0.01 mg/m³.
DRYPOINT M membrane dryers have been an alternative to existing ones for years Compressed air drying process proven.
Advantages DRYPOINT M PLUS
Proven process of highest reliability and functional safety
Immediate availability of dry compressed air, even when working discontinuously
Low purge air requirement, compressed air drying can be adjusted to the application
Compact and robust, small space requirement due to low overall height
Compressed air inlet and outlet on one level (filter version), easy to combine with CLEARPOINT filters
Maintenance and wear-free as there are no moving parts
No reduction in the oxygen content, therefore also suitable for breathing air treatment
No electrical connection, also suitable for Ex areas
Long service life in case of use of CLEARPOINT filters
Environmentally friendly, does not require CFCs / CFC-containing refrigerants or adsorbents
Complete solution: filtration and dryer in a compact form, integration of drain pipe
Filtration at the point in the treatment chain where the highest efficiency is achieved
Easy maintenance / replacement of filter element as with a regular filter
Filter element: N (nanofilter)
The CLEARPOINT filter element type N is used to separate solid particles down to 0.01 micron, water and oil aerosols . The element has a multi-stage structure for efficient and long-lasting filtering. In the first stage, coarse particles are retained by a pre-filter layer. In the second stage, finer particles are absorbed by a depth filter bed made of high-performance borosilicate fiber fabric. Due to the very large cavity volume of the filter medium (96%), a very high dirt holding capacity is achieved. The filter medium is specially impregnated in order to avoid cross-sectional swelling of the individual fibers.
Trap: Float trap
The basic version includes a float drain.
Size 10 - 40
This size is for the demand-oriented compressed air drying of medium volume flows configured. Different levels of drying of the compressed air are achieved through different purge air settings.
AIRCRAFT AAD 40 adsorptsioonkuivati tagab kuni 40 m³/h suruõhu tõhusa kuivatamise ning saavutab-40 °C rõhukastepunkti. Nutikas elektrooniline juhtimine, Modbus-ühilduvus ja koormusest sõltuv regenereerimine muudavad selle energiasäästlikuks ja töökindlaks lahenduseks kaasaegsetele tööstuslikele suruõhusüsteemidele.
AIRCRAFT AAD 200 adsorptsioonkuivati tagab kuni 200 m³/h suruõhu tõhusa kuivatamise ning saavutab-40 °C rõhukastepunkti, kaitstes suruõhusüsteeme niiskusest põhjustatud rikete eest. Nutikas elektrooniline juhtimine, energiasäästlik regenereerimissüsteem ja Modbus-ühilduvus muudavad selle ideaalseks lahenduseks suure jõudlusega tööstuslikele suruõhusüsteemidele.
