Ceiling bracket for NEO panels (ref. 90-108_1) allows the heating panel to be mounted on the ceiling. It is dedicated to heating panels with indexes: 90-104, 90-107.
Professionaalne ehituslik õhukuivati on mõeldud kasutamiseks ehitusobjektidel, keldrites, laoruumides ja muudes suure niiskuskoormusega ruumides. Seade eemaldab kuni 50 liitrit niiskust ööpäevas ning sobib kuni 180 m² suuruste pindade kuivatamiseks. Sisseehitatud 7-liitrine veepaak, automaatne sulatusfunktsioon ja pideva vee äravoolu võimalus muudavad seadme mugavaks ning tõhusaks töövahendiks niiskuskahjustuste kõrvaldamisel.
Tehnilised andmed:
Võimsus: 750 W (max 900 W)
Niiskuse eemaldamine: kuni 50 l/24 h
Õhuvooluhulk: 300 m³/h
Müratase: 56 dB
Sobiv pindala: kuni 180 m²
Veepaagi maht: 7 l
Töötemperatuur: +5 °C kuni +35 °C
Külmaaine: R290
Automaatne sulatusfunktsioon
Pideva vee äravoolu võimalus
Taimer: kuni 24 h
LCD-ekraan
Mõõtmed: 480 × 450 × 655 mm
Kaal: 30 kg
Rataste ja käepidemega korpus lihtsaks transportimiseks
Legs for NEO heating panels (ref. 90-109) enable free-standing positioning of the heating panel. Dedicated to heating panels with indexes: 90-102, 90-103, 90-104, 90-105, 90-106, 90-107.
Ceiling bracket for NEO panels (ref. 90-108) enables the heating panel to be mounted on the ceiling. It is dedicated to heating panels with indexes: 90-102, 90-103, 90-105, 90-106.
The ceramic 800 W/1500 W 90-110 thermal heater by NEO is a fireplace heater with adjustable heating power, with two positions. It supports a voltage of 220-240V~50Hz. The NEO brand thermo heater has a built-in heating element - a ceramic heater. It is capable of heating an area from 20 to 30 m2. Its location on feet makes it more mobile and has a wider heating range. It is characterised by its flame effect, introducing a cosy atmosphere without harmful smoke or dangerous flames. It is an environmentally friendly device that ensures thermal safety. Its dimensions of 38x24x46 cm and low weight of 3 kg benefit storage during the summer months. The unit's built-in thermostatic temperature control, protection against overheating, overloading, the use of flame-resistant materials, the anti-scald grille and short-circuit protection are a number of features that make the presented fan heater have everything you would expect from this type of product. It is recommended for reheating flats, offices or holiday homes, for example. The elegant design of the NEO brand thermo fan makes it a universal device with many applications.
"VL001G XGT® aku toitega vibrolatt on loodud tõhusaks ja ühtlaseks betooni viimistlemiseks ilma juhtmetest tulenevate piiranguteta. XGT® 40Vmax aku toitel töötav seade ühendab liikuvuse ja usaldusväärse jõudluse professionaalsete tööde jaoks. Vahetatavad latid võimaldavad tihendamist laiustes vahemikus 900 kuni 1800 mm, pakkudes paindlikkust erinevate tööde jaoks. Latte saab eemaldada kiiresti tööriistavabalt hooba kasutades, võimaldades objektil teha kiireid seadistusi. Harjavaba mootor ja püsikiiruse hoidmise funktsioon hoiab vibratsiooni stabiilsena sõltumata aku laetuse tasemest, tagades ühtlase betooni tihendamise ja kvaliteetse pinnaviimistluse. Tööriista toru ja lati valmistamisel kasutatud alumiinium vähendab seadme kogukaalu, säilitades samal ajal tugevuse, mis parandab manööverdusvõimet ja muudab seadme käsitsemise mugavamaks. Kummist käepidemed aitavad vähendada kätele kanduvat vibratsiooni, samas kui käepidemete lai vahekaugus võimaldab kasutajal töö iseloomust lähtuvalt käte asendit muuta. Lüliti ja lukustusnupp on kaitstud betooni kogunemise eest, et tagada nende sujuv toimimine ka nõudlikes töötingimustes. Seljakott-akupangaga ühilduv VL001G pakub praktilist ja usaldusväärset lahendust professionaalseteks betooni viimistlustöödeks."
Integrated DRYPOINT M Plus solution: filtration and dryer in a compact form, as well as condensate drain integrated
Filtration on the spot in the treatment chain where the highest efficiency is achieved
Easy maintenance / replacement of filter element as with a filter
Application-specific degree of dryness can be selected
Consistent compressed air quality under fluctuating operating conditions
Energy saving through minimization of purging air consumption for actual amount of useful air and degree of drying
Power evaluation via LED, forwarding via current output 4 … 20 mA possible
User-friendly: Easy to use, test functions, error messages
Concept based on the fail-safe principle, error message can be picked up via potential-free contact
Functionality of the DRYPOINT® M eco control
Based on the measurement result from the sensor, the control software decides in defined cycles whether and how long the full amount of purge air has to be provided to achieve and stabilize the required degree of dryness. This process is implemented by means of a targeted clocking of a solenoid valve. In each cycle, the duration of the two process sections described below varies in order to keep the degree of drying within the specified tolerance range.
Drying by partial vapor pressure compensation of water vapor by diffusion in combination with a highly selective membrane
No change in the compressed air composition - can be used for breathing air treatment
Efficient
Reaches the required pressure dew point with low energy consumption
Very fast availability of dried compressed air
Filtration and drying compact in one device
Robust
Housing made of seawater-resistant aluminum
Low-maintenance, currentless technology
System-compatible
Modularly combinable with CLEARPOINT Filter program
Can be used anywhere along the compressed air treatment chain - can also be integrated into system technology
The ultimate membrane dryer technology with integrated nanofilter
Filtration and drying in one housing (simple filter element change)
Low purge air requirement (Twist 60 technology)
Availability of dried compressed air immediately without running-in phase
Safe drying due to the high partial vapor pressure gradient
No change in the compressed air temperature and composition
Proven 100,000 times
Maintenance-free (except filter element change)
For diverse applications, including for breathing air treatment
Also ideal for use directly behind the compressor / aftercooler
Optionally also for higher loads (assembly potting, 16 bar, 70°C)
For a reliable function of the DRYPOINT M membrane dryer must meet the following requirements:
The incoming compressed air must not contain any liquid condensate
Particles larger than 1 μm must be separated before the membrane dryer
The oil content of the compressed air must not exceed 0.01 mg/m³.
DRYPOINT M membrane dryers have been an alternative to existing ones for years Compressed air drying process proven.
Advantages DRYPOINT M PLUS
Proven process of highest reliability and functional safety
Immediate availability of dry compressed air, even when working discontinuously
Low purge air requirement, compressed air drying can be adjusted to the application
Compact and robust, small space requirement due to low overall height
Compressed air inlet and outlet on one level (filter version), easy to combine with CLEARPOINT filters
Maintenance and wear-free as there are no moving parts
No reduction in the oxygen content, therefore also suitable for breathing air treatment
No electrical connection, also suitable for Ex areas
Long service life in case of use of CLEARPOINT filters
Environmentally friendly, does not require CFCs / CFC-containing refrigerants or adsorbents
Complete solution: filtration and dryer in a compact form, integration of drain pipe
Filtration at the point in the treatment chain where the highest efficiency is achieved
Easy maintenance / replacement of filter element as with a regular filter
Filter element: N (nanofilter)
The CLEARPOINT filter element type N is used to separate solid particles down to 0.01 micron, water and oil aerosols . The element has a multi-stage structure for efficient and long-lasting filtering. In the first stage, coarse particles are retained by a pre-filter layer. In the second stage, finer particles are absorbed by a depth filter bed made of high-performance borosilicate fiber fabric. Due to the very large cavity volume of the filter medium (96%), a very high dirt holding capacity is achieved. The filter medium is specially impregnated in order to avoid cross-sectional swelling of the individual fibers.
Trap: Float trap
The basic version includes a float drain.
Size 10 - 40
This size is for the demand-oriented compressed air drying of medium volume flows configured. Different levels of drying of the compressed air are achieved through different purge air settings.
Aircraft AD 54 on kompaktne ja energiasäästlik suruõhu külmkuivati, mis eemaldab suruõhust niiskuse ning aitab kaitsta pneumaatilisi tööriistu, masinaid ja suruõhusüsteeme korrosiooni ning kondensaadi tekitatud kahjustuste eest. Tänu elektrooniliselt juhitavale jahutussüsteemile tagab seade stabiilse töö, väiksema kulumise ja madalad kasutuskulud.
AIRCRAFT AAD 120 adsorptsioonkuivati tagab kuni 120 m³/h suruõhu tõhusa kuivatamise ning saavutab-40 °C rõhukastepunkti. Nutikas elektrooniline juhtimine, energiasäästlik regenereerimissüsteem ja Modbus-ühilduvus muudavad selle töökindlaks lahenduseks tööstuslikele suruõhusüsteemidele, kus on oluline maksimaalne suruõhu kvaliteet ja süsteemi töökindlus.
Drying by partial vapor pressure compensation of water vapor by diffusion in combination with a highly selective membrane
No change in the compressed air composition - can be used for breathing air treatment
Efficient
Reaches the required pressure dew point with low energy consumption
Very fast availability of dried compressed air
Filtration and drying compact in one device
Robust
Housing made of seawater-resistant aluminum
Low-maintenance, currentless technology
System-compatible
Modularly combinable with CLEARPOINT Filter program
Can be used anywhere along the compressed air treatment chain - can also be integrated into system technology
The ultimate membrane dryer technology with integrated nanofilter
Filtration and drying in one housing (simple filter element change)
Low purge air requirement (Twist 60 technology)
Availability of dried compressed air immediately without running-in phase
Safe drying due to the high partial vapor pressure gradient
No change in the compressed air temperature and composition
Proven 100,000 times
Maintenance-free (except filter element change)
For diverse applications, including for breathing air treatment
Also ideal for use directly behind the compressor / aftercooler
Optionally also for higher loads (assembly potting, 16 bar, 70°C)
For a reliable function of the DRYPOINT M membrane dryer must meet the following requirements:
The incoming compressed air must not contain any liquid condensate
Particles larger than 1 μm must be separated before the membrane dryer
The oil content of the compressed air must not exceed 0.01 mg/m³.
DRYPOINT M membrane dryers have been an alternative to existing ones for years Compressed air drying process proven.
Advantages DRYPOINT M PLUS
Proven process of highest reliability and functional safety
Immediate availability of dry compressed air, even when working discontinuously
Low purge air requirement, compressed air drying can be adjusted to the application
Compact and robust, small space requirement due to low overall height
Compressed air inlet and outlet on one level (filter version), easy to combine with CLEARPOINT filters
Maintenance and wear-free as there are no moving parts
No reduction in the oxygen content, therefore also suitable for breathing air treatment
No electrical connection, also suitable for Ex areas
Long service life in case of use of CLEARPOINT filters
Environmentally friendly, does not require CFCs / CFC-containing refrigerants or adsorbents
Complete solution: filtration and dryer in a compact form, integration of drain pipe
Filtration at the point in the treatment chain where the highest efficiency is achieved
Easy maintenance / replacement of filter element as with a regular filter
Filter element: N (nanofilter)
The CLEARPOINT filter element type N is used to separate solid particles down to 0.01 micron, water and oil aerosols . The element has a multi-stage structure for efficient and long-lasting filtering. In the first stage, coarse particles are retained by a pre-filter layer. In the second stage, finer particles are absorbed by a depth filter bed made of high-performance borosilicate fiber fabric. Due to the very large cavity volume of the filter medium (96%), a very high dirt holding capacity is achieved. The filter medium is specially impregnated in order to avoid cross-sectional swelling of the individual fibers.
Trap: Float trap
The basic version includes a float drain.
Size 10 - 40
This size is for the demand-oriented compressed air drying of medium volume flows configured. Different levels of drying of the compressed air are achieved through different purge air settings.
AIRCRAFT ASD 480 suruõhu külmkuivati kuivatab kuni 8000 l/min suruõhku ning aitab vähendada energiakulusid tänu patenteeritud glükooltehnoloogiale. Töökindel lahendus professionaalsetele suruõhusüsteemidele, kus on oluline kuiv ja kvaliteetne suruõhk ning madalad kasutuskulud.
Tehnilised andmed:
Mudel: ASD 480
Tootjakood: 2041850
Tüüp: suruõhu külmkuivati
Maksimaalne õhuvool: 8000 l/min
Õhu tootlikkus: 480 m³/h
Maksimaalne töörõhk: 16 bar
Õhuühendus: 1½"
Elektrivõimsus: 1,28 kW
Maksimaalne siseneva suruõhu temperatuur: 60 °C
Maksimaalne ümbritseva keskkonna temperatuur: 50 °C
