Elektri- ja akutööriistad, tööpingid

Tarvikud elektritööriistadele ja tööpinkidele

Generaatorid

Vaata kui Tabel Nimekiri

Sorteerimine

Kuva leheküljel

Vispel 120 mm värvi segamiseks

02-56H701

Mixer working part with a diameter of 120 mm dedicated to stem ref 56H700. A pull-up mixer designed for thin solutions, e.g. paints, gypsum plaster, structural paints. The solution is forced downwards so that it does not spill or dirty the surroundings.

14,10€

Laost otsas. Tellides tarneaeg nädalat

Floor tool for 59G613, 59G614

02-59G613-149C

Floor nozzle (for 59G613, 59G614) 59G613-149C by GRAPHITE is a nozzle designed for industrial hoovers with part numbers 59G613 and 59G614. It is characterised by a diameter of 32mm. Designed to remove debris from large areas and various types of flooring.

6,10€

Laost otsas. Tellides tarneaeg nädalat

Löökkruvikeeraja otsikud TX40 × 25 mm, 20 tk

02-56H548

GRAPHITE löökkruvikeeraja otsikute komplekt TX40 on mõeldud professionaalseks ja intensiivseks kasutamiseks töödel, kus rakendatakse suuri pöördemomente. 25 mm pikkus sobib täpseks ja kontrollitud kruvimiseks ning 20‑osaline komplekt on praktiline lahendus töökojale ja igapäevaseks kasutuseks. Otsikud sobivad nii akutrellide kui ka löökkruvikeerajatega.

Otsikud on valmistatud kvaliteetsest S2 terasest, mida iseloomustab suur elastsus ja vastupidavus mehaanilistele kahjustustele. Torsioonitsoon vähendab löökkoormuse ja pöördemomendi otsest ülekandumist otsikule, aidates vältida purunemist ning pikendades otsikute kasutusiga. Täpne TX40 (Torx) profiil tagab kindla haardumise kruviga ja vähendab libisemise ohtu töö käigus.

Otsikud on pakendatud praktilisse plastikust hoiukarpi, mis võimaldab mugavat hoiustamist ja transporti.

Tehnilised andmed:

Tüüp: TX40 (Torx)
Pikkus: 25 mm
Kinnitus: 1/4" kuuskant
Kogus pakendis: 20 tk
Materjal: S2 teras
Versioon: löökkindel (impact)

12,80€

Laost otsas. Tellides tarneaeg nädalat

Reduction nozzle for 59G613, 59G614

02-59G613-150

The reduction tip (for 59G613, 59G614), 59G613-150 by GRAPHITE is an accessory with diameters: 26, 32, 35 and 40 mm, designed for industrial hoovers with part numbers 59G613 and 59G614. The GRAPHITE brand reduction tip expands the usability of the above hoovers.

1,60€

Laost otsas. Tellides tarneaeg nädalat

Pot filter for 04-738, 04-739

03-04738151

The pot filter (for 04-738, 04-739) 04-738-151 by NEO TOOLS is characterised by an upper diameter of 15 cm, a lower diameter of 12 cm and a height of 14 cm. It is designed for industrial hoovers numbered 04-738 and 04-739 by NEO TOOLS. This pot-type filter is an essential accessory for the proper functioning of the above-mentioned devices.

7,30€

Laost otsas. Tellides tarneaeg nädalat

Kruvikeeraja otsikud PZ2 25 mm, 100 tk

02-56H624

GRAPHITE kruvikeeraja otsikute komplekt PZ2 on mõeldud Pozidriv‑tüüpi kruvide kinnitamiseks ja lahtikeeramiseks ning sobib eriti hästi seeriatöödeks, kus on vaja kruvida suur hulk kinniteid. 25 mm pikkused otsikud on standardpikkusega ja laialdaselt kasutusel mööbli-, puidu‑ ja üldehitustöödel.

Otsikud on valmistatud kvaliteetsest S2 legeerterasest, mis tagab hea vastupidavuse kulumisele ja mehaanilistele koormustele ning sobib nii käsitööks kui ka elektriliste ja akutoitel kruvikeerajatega töötamiseks. Universaalne 1/4" kuuskantkinnitus tagab ühilduvuse enamiku tööriistade ja otsikuhoidjatega. Komplekt sisaldab 100 üksikut otsikut, mis teeb selle praktiliseks lahenduseks professionaalseks kasutuseks ja töökodadesse.

Tehnilised andmed:

Tüüp: Pozidriv PZ2
Pikkus: 25 mm
Kinnitus: 1/4" kuuskant
Materjal: S2 legeerteras
Komplektis: 100 tk
Kasutusala: mööbli‑ ja puidutööd, üldehitus, seeriakruvimine

24,60€

Laost otsas. Tellides tarneaeg nädalat

Trimmer cord, round, diameter 1.6 mm, length 15 m

03-07100

Round trimmer line diameter 1.6 mm, length 15 m, 07-100 by NEO TOOLS is a round trimmer line for universal use, characterised by a diameter of 1.6 mm and a length of 15 m. This NEO TOOLS brand line is a guarantee of high quality and appropriate durability.

1,20€

Laost otsas. Tellides tarneaeg nädalat

Minipoleerija tarvikute komplekt

03-0460420

Komplekt sisaldab: 2 lihvpaberit kolmes erinevas kareduses (P120, P240, P600) läbimõõduga 5 cm, 2 poleerimispatja (6 cm), 2 keskmise karedusega lihvotsikut ja 2 kõva lihvotsikut (6 cm).

Komplekti on soovitatav kasutada koos 04-604 NEO TOOLS mini poleerijaga.

8,49€

Laost otsas. Tellides tarneaeg nädalat

Otsik PZ3 × 150 mm

03-56574

NEO TOOLS otsik PZ3 on 150 mm pikkune otsik, mis on varustatud 1/4" HEX‑kinnitusega. Otsik on loodud suure deformatsioonikindlusega ning sobib sagedaseks ja intensiivseks kasutamiseks.

Otsik on valmistatud vastupidavast S2 terasest, mis tagab pika kasutusea ja töökindluse ka suure koormuse all. PZ3 otsik on mõeldud POZIDRIV‑tüüpi kruvidele ning leiab kasutust nii professionaalsetes töökodades kui ka isetegemise projektides.

2,50€

Laost otsas. Tellides tarneaeg nädalat

Torx otsik T30 × 25 mm, 3 tk

02-56T519

Torx bits T30 x 25 mm, 3 pieces 56T519 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.

1,00€

Laost otsas. Tellides tarneaeg nädalat

Torx otsik T20 × 25 mm, 3 tk

02-56T522

Torx bits T20 x 25 mm, 3 pieces 56T522 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The bits from the GRAPHITE brand are suitable for many tasks.

1,00€

Laost otsas. Tellides tarneaeg nädalat

Otsik PH1 × 50 mm, 3 tk

02-56T540

Bits PH1 x 50 mm, 3 pieces 56T540 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.

1,20€

Laost otsas. Tellides tarneaeg nädalat

Otsik PZ1 × 25 mm, 3 tk

02-56T537

The PZ1 x 25 mm bits, 3 pieces 56T537 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.

0,905€

Laost otsas. Tellides tarneaeg nädalat

Löökotsik PH1 × 25 mm, 2 tk

03-56500

2,10€

Laost otsas. Tellides tarneaeg nädalat

Magnetiline otsikuhoidik 60 mm, 1/4" kuuskant

02-56T510

Magnetic chuck 60 mm, 1/4" Hex 56T510 by GRAPHITE is designed for use with screwdrivers and drill drivers. The magnet holding the bit in the socket makes work more convenient and efficient. The bit size is 1/4" (hexagon). The GRAPHITE brand chuck is made from tool steel. The magnet also makes it possible to attach the blades quickly and prevents them from falling out. The length of 60 mm, on the other hand, makes the handle handy and suitable for working in hard-to-reach places. The product is compatible with most screwdrivers and drills. The GRAPHITE magnetic chuck is ideal for assembly work, carpentry, renovation and anywhere else where a quick change of tool bits is required.

1,30€

Laost otsas. Tellides tarneaeg nädalat

Otsik PH3 × 50 mm, 3 tk

02-56T538

Bits PH3 x 50 mm, 3 pieces 56T538 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.

1,20€

Laost otsas. Tellides tarneaeg nädalat

Torx otsik T15 × 25 mm, 3 tk

02-56T523

Torx bits T15 x 25 mm, 3 pieces 56T523 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.

1,00€

Laost otsas. Tellides tarneaeg nädalat

Löökotsik HEX4 × 25 mm, 2 tk

03-56507

NEO TOOLS HEX4 löökotsikud on kompaktsed ja löögikindlad otsikud kuuskantpeaga kruvide jaoks, mis on valmistatud vastupidavast S2 terasest ja sobivad intensiivseteks montaažitöödeks.

HEX4 profiil tagab kruvis kindla ja täpse istuvuse, vähendades libisemist ja kulumist. 1/4" HEX‑kinnitus tagab laia ühilduvuse erinevate otsikuhoidikute ja otsikumagasinidega.

2‑osaline komplekt võimaldab otsikuid mugavalt vahetada ja tagab töö sujuvuse hoolduses, montaažil ning töökojas.

2,10€

Laost otsas. Tellides tarneaeg nädalat

Otsik PZ2 × 50 mm, 3 tk

02-56T533

PZ2 x 50 mm bits, 3 pieces 56T533 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.

1,20€

Laost otsas. Tellides tarneaeg nädalat

Kuuskantotsik H5 × 25 mm, 3 tk

02-56T530

Hex bits H5 x 25 mm, 3 pieces 56T530 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.

1,00€

Laost otsas. Tellides tarneaeg nädalat