Elektri- ja akutööriistad, tööpingid

Tarvikud elektritööriistadele ja tööpinkidele

Generaatorid

Vaata kui Tabel Nimekiri

Sorteerimine

Kuva leheküljel

Lihvpaber 230 × 280 mm, K220

02-55H893

Sanding paper GRAPHITE (ref. no. 55H893) in a sheet with dimensions 230 x 280 mm and granulation 220. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive paper with C-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (alumina)) guarantees greater working efficiency and reduces the risk of clogging. The product designed to be used with orbital grinders, trowels and sanding blocks. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

0,397€

Laost otsas. Tellides tarneaeg nädalat

HSS-Co metallipuur 3,5 mm, 10 tk

02-57H023-10

Metal drills GRAPHITE (ref. no. 57H023-10) with diameters 3.5 mm are made of high quality M35 HSS alloy with 5% cobalt additive. 135° point angle and chisel edge correction allow for easy drilling without punching. Thanks to alloy resistance to high temperature, the drills are perfect for drilling holes in hardly machinable materials, like stainless steel, acid resistant steel, heat resistant steel etc.

10,80€

Laost otsas. Tellides tarneaeg nädalat

Metallipuur HSS 6,0mm x 10 tk

01-60H082.

HSS-G metallipuuride komplekt sisaldab 10 kvaliteetset 6,0 mm läbimõõduga puuri, mis on valmistatud kiirlõiketerasest (HSS-G) sügavlihvimise tehnoloogiat kasutades. Tänu 135° tipunurgale ja ristterakorrektsioonile võimaldavad puuriterad täpset puurimise alustamist ilma eelneva täkestamiseta. Sobivad terase, puidu ja plastide töötlemiseks.

Tehnilised andmed:

Tüüp: HSS-G metallipuur
Läbimõõt: 6,0 mm
Komplektis: 10 puuri
Materjal: HSS-G kiirlõiketeras
Tipunurk: 135°
Ristterakorrektsioon: jah
Sobib materjalidele: teras, puit ja plast

14,20€

Laost otsas. Tellides tarneaeg nädalat

Lihvpaber rullis 115 mm, K100, 2,5 m

02-55H862

Sanding paper GRAPHITE (ref. no. 55H862) in a roll, 2.5 m long, 115 mm wide and granulation 100. Dedicated to grinding gypsum, finishing putty, wood, paint and varnish. The abrasive paper with D-paper backing designed for mechanical and manual grinding. The paper’s open coating (50-60% of the paper surface is covered with abrasive grain (white fused alumina)) guarantees greater resistance of the grain surface to clogging with abrasive dust . The product designed to be used with orbital grinders and sanding trowels. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

2,29€

Laost otsas. Tellides tarneaeg nädalat

Täiskõvasulamist saeketas 300 × 30 mm, 40 hammast

02-55H606

Solid carbide saw blade GRAPHITE (ref. no. 55H606) with diameters 300 mm, made of MN65 manganese steel alloy with high resistance to temperature and deformations. Teeth with sintered carbide tips YG6A are designed for rough cutting of wood and wood like materials, like plywood, chipboard, MDF. Thanks to included adapter rings it is possible to use the blade in most of saw models.

40,50€

Laost otsas. Tellides tarneaeg nädalat

Lihvpaber rullis 115 mm, K220, 2,5 m

02-55H866

Sanding paper GRAPHITE (ref. no. 55H866) in a roll, 2.5 m long, 115 mm wide and granulation 220. Dedicated to grinding gypsum, finishing putty, wood, paint and varnish. The abrasive paper with D-paper backing designed for mechanical and manual grinding. The paper’s open coating (50-60% of the paper surface is covered with abrasive grain (white fused alumina)) guarantees greater resistance of the grain surface to clogging with abrasive dust . The product designed to be used with orbital grinders and sanding trowels. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

2,29€

Laost otsas. Tellides tarneaeg nädalat

Kivipuur must‑valge 10x120mm

01-60H178

Masonry drill VERTO (ref no. 60H178) with 10.0 mm diameter. Tipped with fine grit sintered carbide and enhanced resistance to high temperature. Grinded drill flute reduces drilling forces. VERTO brand offers power tool and accessories assortment for all DIY enthusiasts.

1,60€

Laost otsas. Tellides tarneaeg nädalat

Lihvkäsn 120 × 95 × 10 mm, K100

02-55H913

Abrasive sponge GRAPHITE (ref. no. 55H913) with dimensions 120 x 95x 10 mm and granulation 100. Designed for finish grinding. Perfectly suitable for manual grinding and smoothing of putty, finish coats, gypsum, paints, plastics, wood, metal and varnish coatings. Suitable for wet and dry processing. Abrasive grain coating on both sides of the sponge. Thanks to its soft structure, the sponge adapts perfectly to the shape of ground surfaces. The sponge can be cut into smaller pieces to process hard-to-reach areas. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

1,00€

Laost otsas. Tellides tarneaeg nädalat

HSS-Co metallipuur 4,5 mm, 10 tk

02-57H028-10

Metal drills GRAPHITE (ref. no. 57H028-10) with diameters 4.5 mm are made of high quality M35 HSS alloy with 5% cobalt additive. 135° point angle and chisel edge correction allow for easy drilling without punching. Thanks to alloy resistance to high temperature, the drills are perfect for drilling holes in hardly machinable materials, like stainless steel, acid resistant steel, heat resistant steel etc.

17,79€

Laost otsas. Tellides tarneaeg nädalat

Piiksae tera BIM 225 × 20 × 0,9 mm, 18 TPI, 2 tk komplekt

02-57H953

GRAPHITE sabre saw blades have teeth of high speed steel. Combination of high speed steel with chromium vanadium steel allows to use the blades for cutting of all pieces made of steel, stainless steel, plastic and wood. Combination of these two steel types guarantees unique blade flexibility, which allows to work with bent blade. Therefore, it is possible to make cuts in hard to reach areas.

9,70€

Laost otsas. Tellides tarneaeg nädalat

Takjakinnitusega lihvpaber 115 × 230 mm, K180, 5 tk, avadega

02-55H725

Velcro sand paper GRAPHITE (ref. no. 55H725) with dimensions 115 x 230 mm and granulation 180, with holes. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive paper with E-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (aluminium oxide)) guarantees greater working efficiency and reduces the risk of clogging. Velcro fastening allows quick replacement of used abrasive disc. Designed for mounting on orbital grinders. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

3,20€

Laost otsas. Tellides tarneaeg nädalat

Fiiberketas 125 mm, K60, 3 tk

02-55H856

Fibra sanding disc GRAPHITE (ref. no. 55H856) with outer diameter 125 mm and granulation 60. Dedicated to grinding metal, steel, plastic, wood and even finishing putty. Ideally suited for deburring, removing rust and processing of welds. The disc with close coating. 100% of the disc surface is covered with abrasive grain (alumina), which guarantees greater processing accuracy and increased working efficiency. The disc is mounted to an angle grinder using a dedicated flexible disc. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

2,60€

Laost otsas. Tellides tarneaeg nädalat

Lihvkangas rullis 115 mm, K120, 2,5 m

02-55H871

Sanding cloth GRAPHITE (ref. no. 55H871) in a roll, 2.5 m long, 115 mm wide and granulation 120. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive cloth with J-cloth backing designed for mechanical and manual grinding. The cloth’s close coating (100% of the cloth surface is covered with abrasive grain (alumina)) guarantees greater processing accuracy and the highest efficiency when processing hard materials. The product designed to be used with orbital grinders, trowels and sanding blocks. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

3,00€

Laost otsas. Tellides tarneaeg nädalat

Metallipuur HSS-CNC, 124°, "Pro-Tec", 8,0 mm

02-55H029

GRAPHITE metal drill with 8.0 mm diameter is made of high quality alloy of high speed steel. 124° point angle and chisel edge correction allow for easy drilling without punching. Designed for fast and efficient drilling in steel workpieces.

4,10€

Laost otsas. Tellides tarneaeg nädalat

SDS+ kivipuur 12x400mm, S4 tüüp

01-60H650

Masonry drill VERTO (ref. no. 60H650) with SDS+ shank 12.0 mm diameter, tip with fine grit sintered carbide allows to efficiently drill holes in concrete. Double S4 flute ensures proper drillings extraction and protects the drill against overheating. VERTO brand offers power tool and accessories assortment for all DIY enthusiasts.

5,10€

Laost otsas. Tellides tarneaeg nädalat

Täiskõvasulamist saeketas 235 × 30 mm, 40 hammast

02-55H692

GRAPHITE Forked Saw Blade (Ref. 55H692) 235mm outside diameter, made from C50 special steel with increased wear and warp resistance. Tungsten carbide teeth with ATB (alternate) geometry for rough cutting of wood and wood based materials such as plywood, chipboard, MDF. The included reduction rings allow the blade to be used with most saw models. The GRAPHITE brand offers a wide range of power tools to meet the needs of professionals.

22,80€

Laost otsas. Tellides tarneaeg nädalat

Takjakinnitusega deltalihvpaber 93 × 93 mm, K80, 5 tk, avadega

02-55H765

Delta sanding paper GRAPHITE (ref. no. 55H765), size 93 x 93 mm and granulation K80. Dedicated to grinding wood, wood-based materials, metals and plastics. Hook and loop fastener allows for quick replacement of worn out paper. Holes allow for nearly dust-free operation with tools equipped with dust extraction system. Product with E-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (aluminium oxide)) guarantees greater working efficiency and reduces the risk of clogging. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

1,20€

Laost otsas. Tellides tarneaeg nädalat

Teemantketas 200 × 25,4 mm, Turbo

02-57H871

GRAPHITE Turbo diamond disc thanks to hot pressed Turbo type segments is perfect for heavy duty construction tasks. Highly resistant diamond segments allow for efficient cutting pieces made of concrete, reinforced concrete, granite, marble, stone, brick etc.

17,00€

Laost otsas. Tellides tarneaeg nädalat

Kivipuur must‑valge 12x250mm

01-60H196

Masonry drill VERTO (ref no. 60H196) with 12.0 mm diameter. Tipped with fine grit sintered carbide and enhanced resistance to high temperature. Grinded drill flute reduces drilling forces. VERTO brand offers power tool and accessories assortment for all DIY enthusiasts.

3,20€

Laost otsas. Tellides tarneaeg nädalat

Kruvikeeraja otsikute komplekt, 15 tk

02-56H616

Komplekti kuuluvad järgmised 25 mm otsikud:

Phillips (PH): PH1, PH2
Pozidriv (PZ): PZ1, PZ2
Piluotsikud (SL): SL5, SL6
Torx: T10, T15, T20, T25, T30
Kuuskant (HEX): H3, H4, H5

16,70€

Laost otsas. Tellides tarneaeg nädalat