HSS-Co 10.0 mm metal drill bits, 5 pcs. 57-054-5 by NEO TOOLS are deep ground drills according to DIN 338 and made of M35 steel with 5% cobalt addition. They use a tip angle of 135° and type C shear correction. They have a cylindrical handle. The length of the working part is 87 mm and their overall length is 133 mm. The maximum speeds are: INOX 375-400 rpm, general metals 750-800 rpm. The purpose of this set by NEO TOOLS is to drill in demanding materials such as stainless, acid-resistant and heat-resistant steel.
P40 karedusega lihvpaber sobib eriti hästi jämedaks lihvimiseks, värvi, laki ja muude pinnakatete eemaldamiseks ning pindade esialgseks töötlemiseks. Kuus tolmueemaldusava tagavad tõhusa tolmu ärajuhtimise ja aitavad hoida tööpinna puhtamana. Pakendis on 5 kolmnurklihvpaberit mõõduga 93 × 93 mm.
HSS-Co 4.0 mm metal drill bit, 10 pcs. 57-024-10 by NEO TOOLS is a drill bit deeply ground according to DIN 338 and made of M35 steel with 5% cobalt addition. It uses an apex angle of 135° and type C shear correction. It has a cylindrical handle. The length of the working part is 43 mm and its overall length is 75 mm. The maximum speeds are: INOX 925-1000 rpm, general metals 1850-2000 rpm. The purpose of this drill bit by NEO TOOLS is to drill in demanding materials such as stainless, acid-resistant and heat-resistant steel.
M14 soil auger for 58G084, 80 x 600 mm 56-780 by NEO TOOLS is an M14 threaded accessory with a diameter of 80 mm and an overall length of 600 mm (working length 440 mm). The robust drill bit is designed for use with the Energy+ 58G084 GRAPHITE cordless mixer. The auger is used for drilling holes in the ground - especially in hard and difficult ground with obstacles such as stones or roots. Indispensable when working in the garden to drill holes for planting trees, as well as installing fences, guards and plant supports. The working part is made of high quality 65 Mn spring steel and the steel construction with 4 mm thick blades, single helix and double plate ensures that the tool is very strong and penetrates the soil effectively.
Sabre saw blades, HCS, set of 3 58-047 by NEO TOOLS for sabre saws is a set including three lengths and serrations, selected for the most common wood and panel work. TPI 6, 152 x 19 x 1.3 mm (4 mm pitch) - for construction timber, plywood, 6-100 mm plastics, <75 mm panels, 6-60 mm chipboard and MDF; allows clean cutting as well as curved and plunge cuts. TPI 6-10, 203 x 19 x 1.3 mm (2.5-4 mm pitch) - for construction wood, plywood, plastics 6-150 mm, panels <175 mm, particle board and MDF 6-60 mm; provides clean cutting over a wider range of thicknesses. TPI 5, 240 x 19 x 1.5 mm (5 mm pitch) - for nailless wood 15-190 mm, fresh wood diameter <190 mm and firewood with diameters of 15-190 mm; works well for straight, fast and coarse cuts. Thanks to its diverse parameters, the NEO TOOLS set covers the typical needs for assembly and garden tasks.
Accessories for mini sander, sanding belts, flap wheels, set of 24 pieces 55-081 by NEO TOOLS is a set of 24 pieces for working with metal, wood, ceramics, glass and plastics. It includes 9 aluminium oxide sanding belts with a diameter of 6.3 mm and gradation P120 and 9 belts with a diameter of 12 mm and gradation P60, as well as 2 sanding drums for mounting them and a 3.2 mm mandrel. The NEO TOOLS set is completed with flap wheels: 2 pieces of 16 mm diameter with a 3.2 mm shank and 1 piece of 32 mm diameter with a 3.2 mm shank. The accessories are designed to operate at a maximum speed of 22,000 rpm.
Steel Brushes, Brush, Cup Brush, Disc Brush, Set of 3 Pieces 55-066 by NEO TOOLS is a set of 3 pieces comprising a 5mm diameter brush, a 15mm diameter cup brush and a 22mm diameter disc brush - each with a 3.2mm diameter shank. They are made from corrugated steel wire and are designed for polishing. They can be suitable for metal, wood, ceramics, glass and plastics.
Õhemad lõikehambad ja ketas ise vähendavad lõiketakistust ning parandavad töö efektiivsust, võimaldades kiiremat lõikamist väiksema koormusega tööriistale. Vastupidav cermet-tehnoloogiaga hammaste konstruktsioon tagab suurepärase kulumiskindluse ning võimaldab lõigata kuni 32 mm paksust terast sujuvalt ja efektiivselt. Uuendatud hambavahede disain parandab metallilaastude eemaldamist, vähendades kuumenemist ja aidates säilitada stabiilset lõikekiirust ka intensiivsel kasutamisel. Lisaks toetab lamedate hammaste esipinna erilihv veelgi paremat laastueemaldust, mille tulemuseks on puhtam ja täpsem lõige.
Kompaktne ja täpne metallitreipink väiksemate detailide töötlemiseks. Sobib töökoja, hoolduse ja täppistööde jaoks, pakkudes head kvaliteeti ning stabiilset tööd.
Omadused:
Elektrooniliselt reguleeritav pöörlemiskiirus
DC‑mootor ühtlase töö ja stabiilse kiiruse hoidmiseks
Kõvastatud ja lihvitud prismatüüp malmvoodi täpseks tööks
Spindli jooksutäpsus ≤ 0,015 mm
Automaatne pikisuunaline etteanne ja keermestamise võimalus
Töökindel ja vastupidav kahekettaline lihvpink metalli lihvimiseks, teritamiseks ja puhastamiseks. Sobib nii töökotta kui ka tööstuslikuks kasutamiseks.
Omadused:
Kahe lihvkettaga konstruktsioon (jäme + peen lihv)
Süvistusotsikute komplekt on kvaliteetne 6-osaline komplekt, mis on mõeldud täpseks ja puhtaks süvistamiseks ning servade töötlemiseks. Sobib kasutamiseks nii metallitöödel kui ka üldistes töökoja rakendustes.
Peamised omadused:
Vastab standardile DIN 335C
Komplekt sisaldab 6 erinevat mõõtu: 6 / 8 / 10 / 11,5 / 15 / 19 mm
Kvaliteetsed süvistusotsikud tagavad puhta tööpinna ja eemaldavad burrid ilma kriimustusteta
Sobib kasutamiseks akutrellide, trellide ja puurpinkidega
Universaalne kasutus erinevate materjalide töötlemiseks
Tarnitakse praktilises ja vastupidavas OPTIMUM plastkarbis
Kasutusvaldkond:
Sobib avade süvistamiseks, kruvipeade süvistamiseks ning materjali servade korrigeerimiseks metalli- ja töökojarakendustes.
OPTIMUM PS 150 on käsitsi juhitav kangkäär, mis on mõeldud metalli täpseks ja efektiivseks lõikamiseks. Seade sobib ideaalselt töökodadesse, metallitöödeks ning hooldus- ja remonditöödeks.
Omadused:
Sobib metallplaatide, lehtmetalli, ümarterase ja lameprofiilide lõikamiseks
Tugev ja stabiilne konstruktsioon tagab täpse ning puhta lõiketulemuse
Ergonoomiline lõikegeomeetria võimaldab mugavat ja vähese jõukuluga kasutamist
Ühtlane ja sujuv lõikamine kogu tööpikkuse ulatuses
Vastupidavad ja kvaliteetsed lõiketerad pika kasutuseaga
Reguleeritav surveseade hoiab töödeldava detaili kindlalt paigal ning väldib väändumist
Tugev vedru takistab kääridel iseeneslikult sulgumist
Stabiilne alus kinnitusavadega statsionaarseks paigaldamiseks
Tehnilised andmed:
Maksimaalne lõikepaksus: kuni 4 mm
Maksimaalne lõikepikkus: 115 mm
Mõõdud: ca 325 × 120 × 960 mm
Kaal: ca 10,7 kg
Kasutusvaldkond:
Sobib metallitöökodadesse, tootmisesse ja hooldustöödeks, kus on vajalik täpne, kiire ja usaldusväärne lõikamine.
Velcro sanding paper 93 x 185 mm, P80, 5 pcs, with holes 55-738 by NEO TOOLS with dimensions 93 x 185 mm. It is characterised by gradation P80 and has a rectangular shape. The paper is recommended for use with wood, metal and plastic. The Velcro fastening facilitates efficient and fast changes. The NEO TOOLS paper has 8 dust extraction holes - each with a diameter of 10 mm, offering comfortable dust-free working and thus more efficient sanding without overheating the material. The NEO TOOLS set of 5 93 x 185 mm sanding papers is recommended for professionals and experienced do-it-yourselfers.
Impact bit extension 150mm 56-558 by NEO TOOLS with a total length of 150mm. It was made of durable CrV steel. It is characterised by a ¼" HEX handle and has a practical magnetic tip, which facilitates the installation of bits. The bit is compatible with impact tools, designed to operate at a maximum speed of 2,000 rpm. NEO TOOLS brand item recommended for professionals and DIY enthusiasts.
Holzstar SBSM-700 on töökindel ja täpne saekettateritaja, mis on mõeldud ketassaagide hammaste kiireks ja kvaliteetseks teritamiseks. Seade sobib nii professionaalseks kasutuseks töökodades kui ka nõudlikule harrastajale.
Omadused:
Kiire ja lihtne teritusprotsess
Sobib saekettastele läbimõõduga 80–700 mm
Reguleeritav saeketta hoidiku kaldenurk vahemikus +45° kuni −30° erinevatele hammaste geomeetriatele
Mootoriplokk pööratav kuni 20° täpseks teritamiseks
Tugev malmist konstruktsioon tagab stabiilsuse ja täpsuse
Vibratsiooni summutavad jalad vaikseks ja sujuvaks tööks
Tehnilised andmed:
Võimsus: 250 W
Toitepinge: 230 V / 50 Hz
Lihvketas: Ø125 mm, ava 13 mm, laius 10 mm (teemant)
Accessories for mini grinder, set of 99 pieces 55-084 by NEO TOOLS is a set that consists of 99 carefully selected items, allowing you to get the most out of your machine. The set includes: 4 drills, 6 cutters, 2 arbors for the cutting disc and sanding stone, 1 arbor for the felt discs and 2 arbors for the sanding belt, as well as 16 sanding belts. The set includes felt discs (1 25 mm and 4 15 mm), a 25 mm material disc, 6 20 mm sanding stones in pink and 6 20 mm sanding stones in green, a 10 x 10 x 25 mm sanding block and a polishing felt on a "bullet" shaped mandrel. For cutting, 30 25 mm cutting discs and 4 35 mm cutting discs are provided, and for sanding, a 25 mm sanding disc. The NEO TOOLS brand set is completed with a mini grinder spanner, 3 collets, 4 sanding stones on an orange mandrel, 2 sanding stones on a green mandrel, 2 nylon brushes and polishing paste, allowing for a comprehensive handling of different tasks with one machine.
