Elektri- ja akutööriistad, tööpingid

Tarvikud elektritööriistadele ja tööpinkidele

Generaatorid

Vaata kui Tabel Nimekiri

Sorteerimine

Kuva leheküljel

Kivi lõikeketas 230 × 3,2 × 22,2 mm, 42 37C30-R-BF

02-57H725

GRAPHITE stone cutting disc allows to greatly reduce cutting time thanks to advanced design and reduced thickness. Product is compliant with EN12413, which ensures high safety at work.

3,91€

Laost otsas. Tellides tarneaeg nädalat

Tüüblite- ja puuride komplekt 43-osaline

01-60H285

Pin Connector Set, 43 pieces VERTO (ref. 60H285) is an offer for the beginner or intermediate DIY enthusiast, which will allow you to easily make connections in wood or wood-based materials. With this set it is possible to make holes with diameters: 6, 8 and 10 mm. The set includes: 3 pcs wood drill bits, 3 pcs depth stops, 6 pcs markers indicating the place of drilling, 30 pcs dowels of three different diameters (6, 8, 10 mm), hex key.

9,70€

Laost otsas. Tellides tarneaeg nädalat

Metalli/INOX-i lõikeketas alumiiniumoksiidist 125 × 1,6 × 22,2 mm, 41 A46-T-BF

02-57T103

Cutting wheel, alumina for metal/INOX 125 x 1.6 x 22.2 mm, 41 A46-T-BF, 57T103 by GRAPHITE is an alumina wheel that is designed for cutting metal and stainless steel (INOX). Its dimensions are 125 x 1.6 x 22.2 mm. This model has a flat design and the designation 41 A46-T-BF. The thickness of the blade is 1.6 mm and the diameter of the mounting hole is 22.2 mm. The maximum speed is 12,200 rpm, corresponding to a speed of 80 m/s. The product complies with the EN 12413 standard.

0,905€

Laost otsas. Tellides tarneaeg nädalat

Metalli lõikeketas korundist, kumer 115 × 2,0 × 22,2 mm, 42 A46-T-BF

02-57T118

Cutting wheel, corundum for metal 115 x 2.0 x 22.2 mm, 42 A46-T-BF, convex 57T118 by GRAPHITE is a convex wheel with a diameter of 115 mm, a thickness of 2 mm and a mounting hole of 22.2 mm. It features a maximum speed of 13,300 rpm, with an operating speed of 80 m/s. The product is designed for cutting metal. The GRAPHITE blade meets the requirements of EN 12413.

0,905€

Laost otsas. Tellides tarneaeg nädalat

Metalli/INOX-i lõikeketas korundist 230 × 2,5 × 22,2 mm, 41 A30-S-BF

02-57T104

Cutting disc, corundum for metal/INOX 230 x 2.5 x 22.2 mm, 41 A30-S-BF, 57T104 by GRAPHITE is an alumina disc that is designed for cutting metal and stainless steel (INOX). Its dimensions are 230 x 2.5 x 22.2 mm. This model has a flat design and the designation 41 A30-S-BF. The thickness of the blade is 2.5 mm and the diameter of the mounting hole is 22.2 mm. The maximum speed is 6,600 rpm, which corresponds to a speed of 80 m/s. The product complies with the EN 12413 standard.

2,70€

Laost otsas. Tellides tarneaeg nädalat

Raadio Energy+ 18 V, ilma akuta

02-58GE128

Tehnilised andmed:

Toitesüsteem: Energy+ 18 V Li-Ion aku või võrgutoide 230 V
Kõlarid: 2 × 15 W
Bluetooth: versioon 5.0
FM-raadio sagedusala: 87,5–108 MHz
DAB+ sagedusala: 174–240 MHz
Mälukohad:

30 FM-jaama

30 DAB+ jaama

Ekraan: 2,4" värviline ekraan
USB-port: 5 V / 1 A
AUX-sisend (3,5 mm)

Omadused:

Töötab nii aku kui ka vooluvõrgu toitel.
Bluetooth 5.0 võimaldab juhtmevaba ühendust telefoni või teiste seadmetega.
Võimalus salvestada kuni 30 FM- ja 30 DAB+ raadiosagedust.
Suur värviline ekraan võimaldab mugavalt seadistusi muuta ja infot jälgida.
Reguleeritava heledusega ekraan tagab hea nähtavuse erinevates valgustingimustes.
Sisseehitatud kell automaatse seadistamisega, äratuskell ja unetaimer (sleep function).
Telefonihoidik kaane sees võimaldab telefoni mugavalt raadioga ühendada.
Vastupidav konstruktsioon sobib kasutamiseks ehitusplatsil, töökojas ja teeninduses.

Ühendused:

Bluetooth 5.0
USB-port
AUX-sisend

144,10€

Laost otsas. Tellides tarneaeg nädalat

Betooni lõikeketas alumiiniumoksiidist, kumer 115 × 2,0 × 22,2 mm, 42 C46-R-BF

02-57T122

Cutting disc, alumina for concrete 115 x 2.0 x 22.2 mm, 42 C46-R-BF, convex 57T122 by GRAPHITE is a convex disc with a diameter of 115 mm, a thickness of 2 mm and a mounting hole of 22.2 mm. It features a maximum speed of 13,300 rpm, with an operating speed of 80 m/s. The product is designed for cutting concrete. The GRAPHITE blade meets the requirements of EN 12413.

1,00€

Laost otsas. Tellides tarneaeg nädalat

Kipsilihvija 710 W, 215 mm, ümmarguse ja delta tallaga, LED-valgustusega

02-59G264

Võimas ja mitmekülgne 710 W kipsilihvija, mis on mõeldud kips-, pahtel- ja krohvipindade lihvimiseks seintel ning lagedel. Seade on varustatud nii ümmarguse kui ka delta-lihvtallaga, mis võimaldavad töödelda nii suuri pindu kui ka nurki ja raskesti ligipääsetavaid kohti. Integreeritud LED-valgustus parandab nähtavust tööpiirkonnas ning aitab saavutada ühtlasema lihvimistulemuse.

Kipsilihvija teleskoopkäepide on reguleeritava pikkusega ning kokkupandav, mis muudab töö mugavaks ja lihtsustab seadme transportimist. Tolmuärastussüsteem koos painduva imuvoolikuga aitab hoida töökeskkonna puhtana.

Tehnilised andmed:

Tüüp: kipsilihvija
Võimsus: 710 W
Toitepinge: 230 V
Pöörlemiskiirus: 800–1700 p/min
Ümmarguse talla läbimõõt: 215–225 mm (allikates esineb mõlemat mõõtu)
Delta-talla läbimõõt: 280 mm
Reguleeritav pikkus: 143–186 cm
Kinnitus: takjakinnitus (Velcro)
Keere: M6

Komplekti kuulub:

GRAPHITE 59G264 kipsilihvija
Ümmargune lihvtald
Delta-lihvtald
Painduv tolmuimurivoolik
12 lihvpaberit (K80, K120, K180)
Transpordikohver

217,40€

Laost otsas. Tellides tarneaeg nädalat

Kipsilihvija 900 W, 180 mm, LED-valgustusega

02-59G263

Võimas 900 W kipsilihvija, mis on mõeldud kips-, pahtel- ja krohvipindade lihvimiseks. Seade on varustatud LED-valgustusega, mis parandab nähtavust tööalal ja aitab saavutada ühtlasema lihvimistulemuse.

Lihvijal on otseajamiga lihvketas, sujuvalt reguleeritav pöörlemiskiirus ning tõhus tolmuärastussüsteem, mille saab ühendada tolmuimejaga. Pikk toitekaabel ja painduv imuvoolik võimaldavad töötada suuremal alal ilma seadme ümberpaigutamiseta.

Tehnilised andmed:

Tüüp: kipsilihvija
Võimsus: 900 W
Toitepinge: 230 V
Lihvketta läbimõõt: 180 mm
Pöörlemiskiirus: 1400–2700 p/min
Keere: M5
Kinnitus: takjakinnitus (Velcro)
Toitekaabli pikkus: 5 m
LED-valgustus: jah

Komplekti kuulub:

GRAPHITE 59G263 kipsilihvija
Lihvpaberid erinevate kareduse astmetega
Tolmuimurivoolik
Tolmukott

101,10€

Laost otsas. Tellides tarneaeg nädalat

Metalli lõikeketas 400 × 4,0 × 32 mm, 41 A24-T-BF

02-57H713

GRAPHITE metal cutting disc thanks to advanced design and reduced thickness allows to greatly reduce cutting time. Product is compliant with EN12413, which ensures high safety at work.

10,80€

Laost otsas. Tellides tarneaeg nädalat

Lihvimisfliis pinnatöötluseks 40x760mm peen 3tk

43-D-80999

Ideaalne väiksemate kriimustuste (nt liimijälgede ja rooste) eemaldamiseks ning pindade poleerimiseks

62,87€ 80,60€

Laost otsas. Tellides tarneaeg nädalat

Taskuühenduse komplekt 5 tk

02-55H251

Taskuühenduse komplekt 5 tk on praktiline abivahend tugevate ja varjatud puiduühenduste tegemiseks. Taskuühenduste süsteem võimaldab valmistada täpseid nurga all kruviavasid, mis tagavad puidudetailide kindla ühendamise ning puhta lõpptulemuse. Sobib kasutamiseks mööbli, riiulite, kappide ja muude puiduprojektide valmistamisel. Taskuühendusi kasutatakse laialdaselt puidutöödes kiireks ja vastupidavaks ühendamiseks.

Komplekti kuulub:

Taskuühenduse rakis
Puurimisjuhik
Vajalikud kinnitustarvikud

Komplektis kokku 5 osa.

Toote eelised:

Võimaldab teha tugevad ja peidetud kruviühendused
Sobib erinevate puiduprojektide valmistamiseks
Kiire ja täpne ühendusviis
Lihtne kasutada nii harrastajale kui ka professionaalile
Aitab saavutada puhta ja esteetilise lõpptulemuse

29,30€

Laost otsas. Tellides tarneaeg nädalat

Perforated sanding discs 225 mm, P180, for grinders 59G264, 59G265, 5 pcs.

03-55781

Perforated sanding discs 225 mm, P180, for sander 59G264, 59G265,5 pieces 55-781 by NEO TOOLS on Velcro, designed for working with plasterboard. The perforation works with dust extraction, which improves the visibility and cleanliness of the workplace when sanding plasterboard and joints. The set contains 5 NEO TOOLS discs and the diameter of 225 mm allows for efficient working of large surfaces. The discs are compatible with GRAPHITE's 59G264 and 59G265 drywall sanders.

12,40€

Laost otsas. Tellides tarneaeg nädalat

Screwdriver bit PZ1 x 150 mm

03-56570

Screwdriver bit PZ1 x 150 mm, 1/4" Hex 56-570 by NEO TOOLS is a PZ1 type bit with a length of 150 mm. Mounted on a ¼" HEX thread. It features high resistance to deformation and is recommended for high frequency work. The part is made of S2 steel. The tip is recommended for POZDIRIV type screws and will prove useful in every professional and DIY workshop.

2,50€

Laost otsas. Tellides tarneaeg nädalat

Jigsaw blades, 8TPI, HCS, T-shaped handle, cpl. 2 pcs, clean cut

03-57759

Jigsaw blades, 8 TPI, HCS, T-handle, set of 2, clean cut 57-759 by NEO TOOLS are accessories with 8 TPI spacing and T-handle, offered in a set of 2. They are designed for clean cutting. Each blade has an overall length of 100mm, a working length of 74mm, a thickness of 1.5mm and a tooth spacing of 2.8mm. Applications include softwood, chipboard, carpenter's plywood, fibreboard 3-30mm thick, as well as plastics with a diameter of less than 30mm, allowing precise machining of common wood materials and selected plastics.

3,20€

Laost otsas. Tellides tarneaeg nädalat

Metal cutting disc 355 x 3.5 x 32.0 mm, 41 A24-R-BF

03-57712

The 355 x 3.5 x 32 mm, 41 A24-R-BF, 57-712 metal cutting disc by NEO TOOLS is a 355 x 3.5 x 32 mm metal cutting disc for dry cutting. It is characterised by a maximum rotational speed of 4,400 rpm and a maximum peripheral speed of 80 m/s. Thanks to its advanced design and thickness, it allows a significant reduction in working time. It ensures a high level of safety thanks to compliance with the EN12413 standard. The NEO TOOLS brand disc is recommended for professionals and DIY enthusiasts.

7,20€

Laost otsas. Tellides tarneaeg nädalat

HSS-Co metallipuur 10,2 mm

03-57055

HSS-Co 10.2 mm metal drill bit, 57-055 by NEO TOOLS is a deeply ground drill bit according to DIN 338 and made of M35 steel with 5% cobalt addition. It uses a tip angle of 135° and type C shear correction. It has a cylindrical handle. The length of the working part is 87 mm and its overall length is 133 mm. The maximum speeds are: INOX 350-390 rpm, general metals 700-780 rpm. The purpose of this drill bit by NEO TOOLS is drilling in demanding materials such as stainless, acid-resistant and heat-resistant steel.

10,60€

Laost otsas. Tellides tarneaeg nädalat

Fibre disc 125 mm

03-57860

The 125 mm 57-860 fibre disc by NEO TOOLS is a disc designed for angle grinders with an M14 thread attachment. Its maximum rotational speed is 12,200 rpm. The disc is a work pad for 125 mm fibre discs and is compatible with products with part number: 55-855, 55-856, 55-857, 55-858, 55-859.The NEO TOOLS brand offers a wide range of power tools and accessories for professional users.

5,29€

Laost otsas. Tellides tarneaeg nädalat

Velcro-backed sanding sheets, iron 80 x 140 mm, P60, 5 pcs, with 11 holes for 59G336

03-54010

Velcro sanding paper, iron 80 x 140 mm, P60, 5 pcs, with 11 holes for 59G336, 54-010 by NEO TOOLS with dimensions 80 x 140 mm. It is characterised by gradation P60, and is intended for delta-type orbital sanders (e.g. GRAPHITE 59G336 grinder). The paper is recommended for use with wood, metal and plastic. The Velcro attachment facilitates efficient and quick changes. The paper has 11 dust extraction holes, offering comfortable dust-free working and therefore more efficient sanding without overheating the material. The set of 5 sanding papers 80 x 140 mm NEO TOOLS is recommended for professionals and experienced DIY enthusiasts.

2,50€

Laost otsas. Tellides tarneaeg nädalat

Diamond blade 250 x 25.4 mm, solid

03-57645

The diamond blade 250 x 25.4 mm, solid 57-645 by NEO TOOLS with a blade diameter of 250 mm and a mounting hole diameter of 25.4 mm, is designed for trimming machines. Due to its hot-pressed continuous segment, it is ideal for heavy and demanding construction work. The robust diamond segment with a height of 6 mm and a thickness of 2.7 mm makes it possible to cut ceramic elements, such as terracotta, among others. The NEO TOOLS blade is recommended for wet cutting at a maximum speed of 6,100 rpm.

18,20€

Laost otsas. Tellides tarneaeg nädalat