Elektri- ja akutööriistad, tööpingid

Tarvikud elektritööriistadele ja tööpinkidele

Generaatorid

Vaata kui Tabel Nimekiri

Sorteerimine

Kuva leheküljel

HEX adapter and pilot drill M22 200 mm

03-55330

The HEX adapter and pilot drill bit for M22 threaded holesaws, 200 mm 55-330 by NEO TOOLS is a set of HEX adapter and pilot drill bit, designed for a variety of construction and renovation tasks with concrete. The adapter is characterised by an overall length of 200 mm. The drill bit, on the other hand, is 110 mm long and has a diameter of 8 mm. NEO TOOLS tool recommended for professionals as well as DIY enthusiasts.

7,01€

Laost otsas. Tellides tarneaeg nädalat

Diamond holesaws (18, 22, 27, 35 mm), set of 4 el.

03-55318

Diamond holesaws (18, 22, 27, 35 mm), 4-piece set 55-318 by NEO TOOLS is a set of four holesaws with diameters: 18, 22, 27, 35 mm, which are made of robust C45 steel. They are characterised by a maximum drilling depth of 30 mm and a speed of up to 13,300 revolutions per minute. With an M14 chuck and HV hardness of 175-200, they are versatile in use. They work best with ceramics, stoneware, concrete, clinker and stone. The D46 grit size and 10 mm diamond coating height ensure clean and precise cutting even in demanding conditions. The NEO TOOLS diamond holesaw set is recommended for professionals as well as DIY enthusiasts.

66,01€

Laost otsas. Tellides tarneaeg nädalat

Abrasive sponge 98 x 25 x 68 mm, K80, angled

03-55925

Abrasive sponge 98 × 25 × 68 mm, P80, bevelled, 55-925 by NEO TOOLS is a 98 × 25 × 68 mm tool with gradation P80, designed for working with metal, plastics and wood. The flexible backing and slanted profile allow even sanding of flat surfaces, edges and corners. The 98 × 68 mm format provides a comfortable grip when working by hand. The P80 model from NEO TOOLS proves its worth for many sanding tasks.

1,50€

Laost otsas. Tellides tarneaeg nädalat

Saw blade, widia, 235 x 30 mm, 48 teeth

03-55693

The saw blade, widia, 235 x 30 mm, 48 teeth 55-693 by NEO TOOLS is equipped with 48 teeth, 2.8 mm x 2 mm, made of tungsten carbide. The ATB tooth, with its special alternate geometry, guarantees increased cutting accuracy. The NEO TOOLS brand MN65 manganese steel disc has a maximum speed of up to 7,500 rpm. Three rings are included, allowing reduction to dimensions: 30 x 25.4 mm, 30 x 20 mm and 30 x 16 mm. The NEO TOOLS blade is designed for cutting wood, wood-based materials, plywood, laminates, MDF. The tool ensures clean and precise work.

23,40€

Laost otsas. Tellides tarneaeg nädalat

Saw blade, widia, 235 x 30 mm, 100 teeth, for aluminium

03-55695

The saw blade, widia, 235 x 30 mm, 100 teeth, for aluminium 55-695 by NEO TOOLS is equipped with 100 teeth, 2.8 mm x 2 mm, made of TCT carbide. The TCG tooth, with its special geometry and wide comb section, guarantees increased load resistance. The NEO TOOLS brand disc in manganese steel MN65 reaches a maximum speed of up to 7,500 rpm. Three rings are included, allowing reduction to dimensions: 30 x 25.4 mm, 30 x 20 mm and 30 x 16 mm. The NEO TOOLS blade is designed for cutting aluminium profiles and other non-ferrous metals. The tool ensures clean and precise work.

33,29€

Laost otsas. Tellides tarneaeg nädalat

SDS Plus reinforced concrete drill bit 14 x 1000 mm, quatro

03-54131

The SDS Plus 14 x 1000 mm, quatro 54-131 reinforced concrete drill bit by NEO TOOLS is an accessory characterised by a diameter of 12 mm and an overall length of 1000 mm and a working length of 930 mm. Equipped with an SDS Plus handle, double helix and QUATRO fork (four cross-set forks), it is ideal for working in reinforced concrete. The cross-cut bit is made of fine-grain carbide. This robust tool from NEO TOOLS is recommended for intensive use by professionals.

27,90€

Laost otsas. Tellides tarneaeg nädalat

Velcro-backed sanding discs 125 mm, P240 5 pcs, with 8 holes

03-55944

Velcro-backed abrasive discs 125 mm, P240, 5 pcs, with 8 holes 55-944 by NEO TOOLS with a diameter of 125 mm and gradation P240. The package contains five discs. The accessories have 8 practical holes with a diameter of 10 mm, with a diameter between the centres of the holes of 65 mm. Velcro discs from NEO TOOLS are made of type E paper. They are characterised by a half-open grain and grain made of electro-corundum. They will be suitable both for professional use and during DIY tasks, in metal, plastic and wood.

1,60€

Laost otsas. Tellides tarneaeg nädalat

HSS-Co metallipuur 12,0 mm, 5 tk

03-570625

Omadused:

Läbimõõt: 12,0 mm
Komplektis: 5 puuri
Materjal: HSS-Co
Kõrge kuuma- ja kulumiskindlus
Pikk kasutusiga ka suure koormuse korral
Täpne ja stabiilne puurimine
Sobib professionaalseks kasutamiseks

Sobib materjalidele:

Roostevaba teras
Legeeritud terased
Konstruktsiooniteras
Malm
Alumiinium
Vask
Messing
Plastid

64,60€

Laost otsas. Tellides tarneaeg nädalat

Water-based sanding paper 230 x 280 mm, K1500

03-55909

Waterproof sanding paper 230 × 280 mm, P1500, 55-909 by NEO TOOLS is a waterproof paper, 230 × 280 mm and gradation P1500, which is designed for wet sanding. The sheet allows finishing dulling and removal of minor irregularities from the surface. Its applications include: metal, wood, plastics and glass. Sanding with water reduces clogging of the grain and promotes an even machining effect. Sanding paper by NEO TOOLS is a proven solution for many tasks.

0,595€

Laost otsas. Tellides tarneaeg nädalat

Diamond blade 200 x 25.4 mm, segmented

03-57870

The 200 x 25.4 mm, segmented 57-870 diamond disc by NEO TOOLS with a diameter of 200 mm and a mounting hole of 25.4 mm is designed for dry work in concrete. Equipped with segments of 8 mm height and 2.5 mm thickness, it ensures effective cutting with adequate guidance stability. The NEO TOOLS blade is designed to operate at a maximum speed of 7,600 rpm and a peripheral speed of 80 m/s.

15,50€

Laost otsas. Tellides tarneaeg nädalat

Stone cutting disc 115 x 1.6 x 22.2 mm, 41 C 46-R-BF

03-57720

The stone cutting disc 115 x 1.6 x 22.2 mm, 41 C 46-R-BF, 57-720 by NEO TOOLS is a 115 x 1.6 x 22.2 mm disc. The product is intended for dry stone cutting. It is characterised by a maximum rotational speed of 13 200 rpm and a maximum peripheral speed of 80 m/s. Thanks to its advanced design, it significantly reduces working time. It ensures a high level of safety thanks to compliance with the EN12313 standard. The NEO TOOLS brand disc is recommended for professionals and DIY enthusiasts.

1,30€

Laost otsas. Tellides tarneaeg nädalat

Saw blade, widia, 250 x 30 mm, 100 teeth, for aluminium

03-55611

Saw blade, widia, 250 x 30 mm, 100 teeth, for aluminium 55-611 by NEO TOOLS is equipped with 100 teeth, 2.8 mm x 2 mm, made of TCT carbide. The TCG tooth, with its special geometry and wide comb section, guarantees increased load resistance. The NEO TOOLS brand disc in manganese steel MN65 reaches a maximum speed of up to 8,000 rpm. Three rings are included, allowing reduction to dimensions: 30 x 25.4 mm, 30 x 20 mm and 30 x 16 mm. The NEO TOOLS blade is designed for cutting aluminium profiles and other non-ferrous metals. The tool ensures clean and precise work.

37,10€

Laost otsas. Tellides tarneaeg nädalat

Impact bits PZ4 x 25 mm, 2 pcs.

03-56506

Impact bits PZ4 x 25mm, 2 pieces 56-506 by NEO TOOLS are impact bits PZ4, 25mm long. Supplied in a set of 2 pieces. Made from S2 steel, they are suitable for impact work. They have a 1/4" HEX shank. They will work well in professional and DIY tasks.

2,10€

Laost otsas. Tellides tarneaeg nädalat

HSS-CNC metallipuur Pro-Tec 8,0 mm

03-55029

Pro-Tec HSS-CNC metallipuur läbimõõduga 8,0 mm on professionaalne puur täpseks ja efektiivseks tööks metallide ning plastmaterjalidega. Puur on valmistatud kvaliteetsest M2 kiirlõiketerasest (HSS) ning sügavlihvitud vastavalt DIN 338 standardile, tagades suure vastupidavuse ja pika kasutusea.

Puuri 124° tipugeomeetria koos E-tüüpi ristterituse korrigeeringuga võimaldab täpset puurimise algust, vähendab libisemist materjali pinnal ning tagab stabiilse juhtimise kogu tööprotsessi vältel. Sobib kasutamiseks nii tööstuses, töökojas kui ka kodustes töödes.

Toote omadused:

Läbimõõt: 8,0 mm
Seeria: Pro-Tec
Materjal: M2 kiirlõiketeras (HSS)
Standard: DIN 338
Tipunurk: 124°
Tööosa pikkus: 75 mm
Kogupikkus: 117 mm
Soovitatav maksimaalne pöörlemiskiirus: 1000 p/min
Sügavlihvitud täppisgeomeetria puhtaks ja täpseks puurimiseks

Sobib materjalidele:

Teras
Malm
Alumiinium
Vask
Messing
Plastid

4,40€

Laost otsas. Tellides tarneaeg nädalat

Bi-metal hole saw 86 mm

03-57913

NEO TOOLS' 86 mm diameter bi-metal hole saw 57-913 allows precise drilling of holes with a maximum depth of up to 38 mm. Equipped with teeth with a 6/4 TPI pitch, it is suitable for working with a variety of materials. Maximum speeds are: steel - 105 rpm, copper - 140 rpm, aluminium - 155 rpm, stainless steel - 40 rpm, plastic - 1100 rpm, wood - 1500 rpm. This is a versatile tool for professional and amateur use.

15,60€

Laost otsas. Tellides tarneaeg nädalat

Velcro-backed sanding paper 115 x 230 mm, P120, 5 pcs, with 10 holes

03-54005

Velcro sanding paper 115 x 230 mm, P120, 5 pcs, with holes 54-005 by NEO TOOLS with dimensions 115 x 230 mm. It is characterised by gradation P120 and is intended for orbital sanders (e.g. GRAPHITE 59G239 grinder). The paper is recommended for use with wood, metal and plastic. The Velcro fastening facilitates efficient and quick exchange. NEO TOOLS paper has 10 dust extraction holes, offering comfortable dust-free working and thus more efficient sanding without overheating the material. The set of 5 sanding papers 115 x 230 mm is recommended for professionals and experienced DIY enthusiasts.

3,60€

Laost otsas. Tellides tarneaeg nädalat

Abrasive sponge 70 x 25 x 100 mm, K180

03-55920

The 70 × 25 × 100 mm, P180, 55-920 abrasive sponge by NEO TOOLS is a 70 × 25 × 100 mm tool with gradation P180, designed for working with metal, plastics and wood. The flexible backing allows even sanding of flat and profiled surfaces, and the 70 × 25 mm format provides a comfortable grip when working by hand. The P180 model from NEO TOOLS is suitable for intermediate and finishing sanding.

1,10€

Laost otsas. Tellides tarneaeg nädalat

SDS Max iseterituv soonpiik 18 × 600 mm

03-57548

Kinnitus: SDS Max
Tüüp: iseterituv soonpiik
Läbimõõt: 18 mm
Kogupikkus: 600 mm
Kasutusala: betooni töötlemine
Sobivus: SDS Max süsteemiga piik- ja puurvasarad

Omadused:

Iseterituv ots püsivaks tööjõudluseks
Sooneline profiil tõhusamaks materjali eemaldamiseks
Sobib betooni lõhkumiseks ja meiseldamiseks
SDS Max kinnitus kiireks ja kindlaks paigalduseks
Vastupidav konstruktsioon professionaalseks kasutamiseks
Pikem 600 mm tööpikkus paremaks ulatuseks sügavamates töökohtades

17,10€

Laost otsas. Tellides tarneaeg nädalat

Endless belts 75 x 457 mm, K60, 3 pcs.

03-55788

Endless belts 75 x 457 mm, P60, 3 pieces 55-788 by NEO TOOLS is a set of 3 abrasive belts designed for metal, wood and plastic processing. They use electrocorundum as the grain and the backing is a tough X-type canvas, suitable for machine sanding. The semi-open grain reduces clogging and promotes uniform stock removal. The 75 × 457 mm dimensions ensure compatibility with popular belt sanders.

2,80€

Laost otsas. Tellides tarneaeg nädalat

SDS Plus neljalõikeliste kivipuuride komplekt, 5 tk

03-57572

Kinnitus: SDS Plus
Tüüp: neljalõikelised (quatro) kivipuurid
Puuride arv komplektis: 5 tk
Puuride mõõdud:

5 × 110 mm

6 × 110 mm

8 × 160 mm

10 × 160 mm

12 × 160 mm

Tööpikkused:

5 mm puur: 50 mm

6 mm puur: 50 mm

8 mm puur: 100 mm

10 mm puur: 100 mm

12 mm puur: 100 mm

Otsiku materjal: peeneteraline kõvasulam
Spiraal: kahekordne S4 spiraal
Sobivad materjalid: betoon, tellis, müüritis, kivi

Omadused:

Neljalõikeline ristotsik täpseks ja stabiilseks puurimiseks
Kahekordne S4 spiraal tõhusaks puurimistolmu eemaldamiseks
Vähendab ülekuumenemise ohtu puurimise ajal
Sobib kasutamiseks puurvasarate ja löökpuurvasaratega
SDS Plus kinnitus kiireks ja kindlaks paigalduseks
Sobib professionaalseks ja koduseks kasutamiseks betooni- ning müüritisetöödel.

23,00€

Laost otsas. Tellides tarneaeg nädalat