Elektri- ja akutööriistad, tööpingid

• Ideally suited for assembly companies, facade builders, locksmiths, repair shops, exhibition stand builders, etc.
• Ideal for use where cut-off machines are not strong enough or work uncleanly
• Cuts stainless steel with low burr
• Chips dissipate the heat, thus only low heat development during cutting
• Heavy-duty motor with soft start and overload protection
• Immersion into the material possible
• Uncomplicated and fast cutting depth adjustment by means of a precise and easy to read scale
• Double-guided rip fence for precise cutting guidance
• Stable and robust construction
• Handle can be screwed in at two different positions for comfortable handling of the saw in any position
• Simple operation

• Simple operation
• Heavy, compact welded construction
• Particularly low maintenance
• For easy bending with precise adjustment of the bending angle using a stop with scale
• Sheet thickness adjustable via bending beam
• Tools for VA on request: sharp bending rail and bending bar made of Toolox 33, segmented tools and bending bar made of Toolox 33 and segmented goat foot tools made of Toolox 33
• Quality Made in Europe

• Ideal for sawing steel, sandwich panels, trapezoidal sheets, cable ducts, steel pipes and profiles, ferrous and non-ferrous metals, composite materials, etc.
• Lightweight magnesium construction: only 8.4 kg without saw blade
• Closed construction prevents flying chips
• Connection for external suction device

• Ideal for sawing steel, sandwich panels, trapezoidal sheets, cable ducts, steel pipes and profiles, ferrous and non-ferrous metals, composite materials, etc.
• Lightweight magnesium construction: only 8.4 kg without saw blade
• Ideal for use where cut-off machines are not strong enough or work uncleanly
• Cuts stainless steel with little burr
• Closed construction prevents the flying of chips
• Integrated chip tilting compartment
• Heavy-duty motor with soft start and overload protection
• LED load indicator for maximum cutting efficiency and control
• Sturdy and robust construction
• Easy operation
• Connection for external suction device

Tehnilised andmed:

• Maksimaalne lõikekõrgus: 255 mm.
• Lõikeulatus (throat): 396 mm.
• Saelindi kiirus: 20-80 m/min ja 250-1000 m/min.
• Saelindi pikkus: 3145 mm.
• Maksimaalne saelindi pikkus: 3180 mm.
• Saelindi laius: 16 mm.
• Töölaua mõõtmed: 550 × 600 mm.
• Töölaua kandevõime: 150 kg.
• Töökõrgus: 1000 mm.
• Töölaua kallutus vasakule/paremale: 12° / 15°.
• Töölaua kallutus ette/taha: 8° / 8°.
• Saelindi keevitusseadme võimekus: kuni 16 mm.
• Veoratta läbimõõt: 408 mm.
• Mootori võimsus: 1,5 kW.
• Toitepinge: 400 V / 50 Hz.
• Müratase: 70,5 dB(A).
• Mõõtmed (P × L × K): 940 × 675 × 1840 mm.
• Kaal: 410 kg.

Komplekti kuulub:

• Saelint 3150 × 8 × 0,65 mm, 14T.
• Paralleeljuhik.
• Integreeritud saelindi keevitus-, lõõmutus- ja lihvimisseade.

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the rear of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Stopper with reading magnifying glass facilitates reading on the mm scale
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• Quality Made in Germany

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

• With foot control
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp-bending rail
• Seriesßig with manual adjustment of the bending angle
• Especially low-maintenance
• Clamping of the workpiece is motor-driven
• SH models with high, segmented cast base tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• Standard tools hardened
• Sharp bending bar and bending bar hardened
• Segmented tools and bending bar hardened
• Segmented cast foot tools and bending bar hardened

• Swivel range of ± 45 °
• Easy-to-read angle scale enables precise work
• Seconds adjustment of the miter
• Protected vise spindle
• Massive machine base on both sides with holes for the mounting of the material stand MSR
• Long handle allows sawing without great effort with integrated push-button (on / off)
• Automatic switching on of the coolant pump when sawing
• Functional protection device, closed construction, movable
• Fast opening mechanism for optimum safety when cutting
• Centrally exciting vise, 4-fold guided with individually adjustable clamping jaws. Cutting always takes place in optimal position to the workpiece
• Massive machine base
• Protected vise spindle
• Machine base sizes:
  - CS 275 - 460 x 515 x 775 mm and
  - CS 315 - 546 x 620 x 801 mm
• The saw is delivered without circular saw blade (saw blade division freely selectable)

• Cutting thickness up to 4mm
• Intuitive control panel and ergonomic design make handling easier
• Compact and space-saving, ideal for workshops with limited space
• User-friendly and energy-saving thanks to hydraulic drive
• Operation via foot pedal
• Waste pieces fall into a pull-out drawer
• Sliding hold-down device

Professionaalne lauapuurpink 500 W mootoriga. Puurimisvõime terases 16 mm, MK2 spindel, 5 kiirust ja digitaalne näidik.

Tehnilised andmed:

•  Tüüp: lauapuurpink
•  Ajami tüüp: kiilrihmülekanne
•  Mootori võimsus: 0,5 kW
•  Toitepinge: 230 V
•  Võrgusagedus: 50 Hz
•  Maksimaalne puurimisvõime terases S235JR: 16 mm
•  Pidev puurimisvõime terases S235JR: 12 mm
•  Kiiruste arv: 5
•  Pöörlemiskiiruse vahemik: 680–2700 p/min
•  Spindli koonus: MK2
•  Pinooli käik: 65 mm
•  Spindli ulatus: 152 mm
•  Samba läbimõõt: 60 mm
•  Puurilaua tööpind: 235 × 220 mm
•  Puurilaua T-soone suurus: 12 mm
•  Puurilaua pööratavus: 360°
•  Puurilaua kallutus: 45°
•  Maksimaalne kaugus spindlist puurilauani: 325 mm
•  Maksimaalne kaugus spindlist masina aluseni: 530 mm
•  Aluse tööpind: 220 × 230 mm
•  Aluse T-soone suurus: 16 mm
•  Aluse T-soonte arv: 2
•  T-soonte vahekaugus alusel: 148 mm
•  Pikkus: u 585 mm
•  Laius/sügavus: u 305 mm
•  Kõrgus: u 840 mm
•  Netokaal: u 39,5 kg
•  Turvalüliti: IP54
•  Ohutusahel: 24 V DC
•  Spindli kontsentrilisus: alla 0,02 mm, mõõdetuna pinoolilt
•  Näidik: digitaalne puurimissügavuse ja pöörlemiskiiruse näidik
•  Hädaseiskamine: eraldiseisev avariiseiskamislüliti
•  Puuripadrun: kiirkinnituspadrun
•  Spindel: täppiskuullaagritega
•  Kaitseekraan: suur, reguleeritava kõrgusega ja turvalülitiga
•  Kiilrihma kate: turvalülitiga

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 260 mm
• With length measuring device
• Roller and measuring track with mm-scale, manual measuring system with C-guide profile and sliding flap stop
• Quality Made in Germany

Tehnilised andmed:

• Juhtsüsteem: Mitsubishi FX5, 7" puuteekraan.
• Mootori võimsus: 5,5 kW.
• Hüdraulikapumba võimsus: 0,75 kW.
• Toitepinge: 400 V / 50 Hz.
• Lõikekiirus: 15-150 m/min.
• Kiiruse reguleerimine: sujuv.
• Saelindi kalle: 7°.
• Materjalietteanne ühe tsükliga: 2000 mm.
• Maksimaalne materjalietteanne: 9999 mm.
• Töölaua kõrgus: 800 mm.
• Mõõtmed (P × L × K): 4300 × 3400 × 2550 mm.
• Kaal: 4950 kg.

Komplekti kuulub:

• Mitsubishi FX5 juhtsüsteem koos 7" puuteekraaniga.
• Automaatne materjalietteanne 2000 mm.
• Hüdrauliline kaheosaline kruustang.
• Elektriline laastutransportöör.
• Laastukonteiner.
• LED-töövalgustus.
• Emulsioonjahutussüsteem.

• Powerful and quiet drive via LENZE gear motors with brake
• Compact, heavy and stress-free welded steel construction
• Sharp bending rail made of tool steel C50 at the clamping cheek
• Continuous, exchangeable bed support made of tool steel C50
• Continuous bending rail made of tool steel C50 at the bending beam
• Automatic pressure regulation of the clamping cheek via motor current pick-up
• Drive of the clamping cheek via generously dimensioned trapezoidal thread spindles
• Bending angle adjustment PT 1 via potentiometer on the machine front (right)
• Manual fine adjustment of bending beam with scale
• Manual crowning via pressure screws in the bending beam
• Foot remote control with emergency stop function
• All moving parts with low-maintenance bearings
• Electrical components from Schneider or Omron
• SH-models with high, segmented goat's foot tools
• Quality Made in Europe
• Available on request: Models in DUO design with continuous sharp bending rail and segmented goad foot tools, standard tools hardened, sharp bending rail and bending bar hardened, segmented tools and bending bar hardened, segmented goad foot tools and bending bar hardened

MTBS 2103 mootoriga giljotiin professionaalseks lehtmetalli lõikamiseks. Töölaius 2040 mm, lõikevõime kuni 3 mm terasel, LED-lõikejoone valgustus, reguleeritav tagapiirik ja võimas 3 kW mootor.

Tehnilised andmed:

• Töölaius: 2040 mm
• Maksimaalne lõikevõime terasel (400 N/mm²): 3 mm
• Maksimaalne lõikevõime roostevabal terasel (700 N/mm²): 1,5 mm
• Lõigete arv minutis: 34
• Lõikenurk: 2,4°
• Tagapiiriku reguleerimisulatus: kuni 550 mm
• Lehetugede arv: 2
• Mootori võimsus: 3 kW
• Toitepinge: 400 V / 50 Hz
• Mõõtmed (P × L × K): 2620 × 1800 × 1370 mm
• Netokaal: 1300 kg
• Õhukulu tsükli kohta: 4 l

Komplekti sisu:

• MTBS 2103 mootoriga giljotiin
• Manuaalne tagapiirik (reguleerimisulatus kuni 550 mm)
• 90° külgpiirik pikkusega 1000 mm
• LED-lõikejoone valgustus
• Jalapedaal koos hädaseiskamisfunktsiooniga
• Lehetugede komplekt
• Kvaliteetsed pööratavad lõiketerad
• Valgusbarjääriga kaitstud tagumine ala

• For use in industry and trade
• Heavy and stable cast iron construction
• Asymmetrical 3-roller system
• Upper roller swung out, thereby easy removal of the finished workpiece
• Easily adjustable upper and lower roller
• The foot control leaves both hands free for the material supply
• User-friendly
• Powerful 400 volt engine
• Optionally available: hardened rollers

• When ordering, please specify the type of material to be processed!
• All accessories only possible ex works.

Tehnilised andmed:

• Puurimisvõimsus terases (S235JR): 16 mm
• Pidev puurimisvõimsus terases (S235JR): 14 mm
• Mootori võimsus: 0,45 kW
• Toitepinge: 230 V
• Võrgusagedus: 50 Hz
• Kiiruste arv: 12
• Pöörlemiskiirus: 250–2400 p/min
• Spindli koonus: MK2
• Spindli käik: 60 mm
• Väljaulatus: 128 mm
• Spindli viskumistäpsus: ≤ 0,02 mm
• Töölaua mõõtmed: 200 × 200 mm
• T-soonte arv: 2
• T-soonte mõõt: 16 mm
• Töölaua pööramine: 360°
• Töölaua kallutus: ±45°
• Maksimaalne kaugus spindlist töölauani: 410 mm
• Alusplaadi tööpind: 355 × 235 mm
• Maksimaalne kaugus spindlist alusplaadini: 530 mm
• Sambadiameeter: 60 mm
• Mõõtmed (P × L × K): 665 × 430 × 255 mm
• Netokaal: 28 kg
• Brutokaal: 30,2 kg

Komplektis kiirkinnitusega puurpadrun.

• Heavy steel welded construction
• Upper and pinch roller driven
• Motorized delivery of the side roller
• Swing-out top roller
• Roller drive via powerful electric motor and gearbox
• Safety device Emergency line
• Mobile control panel

• Swiveling top roller

• Please specify when ordering material to be processed!
• Other models on request

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 260 mm
• With length measuring device
• Roller and measuring track with mm-scale, manual measuring system with C-guide profile and sliding flap stop
• Quality Made in Germany

• Semi-motor version - manual operation of the upper cheek, bending process motorised
• Designed for professional use
• With foot operation
• heavy, compact weldment
• With continuous sharp bending rail
• Standard with manual adjustment of the bending angle by means of nonius ring
• Particularly low-maintenance
• S-models with segmented top tools
• SH models with high, segmented goat foot tools
• Hardening of standard tools available on request: sharp bending rail and bending strip hardened, segmented tools and bending strip hardened, segmented goat foot tools and bending strip hardened
• Further swivel bending machines available on request

• Heavy welded steel construction
• Horizontal and vertical work possibility
• All three rollers driven by hydraulic motor and planetary gear
• Rolls are hardened
• Hydraulic delivery via two lower rollers
• Lateral mechanical straightening rollers, infinitely adjustable
• Separate control panel with foot control and 2 digital displays

• Hydraulic straightening rollers
• Stepless adjustable rolling speed
• Tube bending rolls
• Angle bending rolls
• Special straightening rollers
• Profile bending rolls
• Plastic rollers for soft materials
• NC control

• Please specify when ordering material to be edited!

• Bending rollers on request

• Optionally, the machine can be equipped with bending rollers especially for their needs
• Also atypical sizes can be made on request

• Very heavy and robust welded construction
• Dynamic drive of the bending beam by means of two frequency-controlled motors with gears
• Over cheek clamping via trapezoidal thread
• High-quality Lenze motors
• Continuous sharp bending rail
• Tools suitable for bending stainless steel
• Bending angle adjustment via touchscreen NC control system
• Sheet thickness adjustment manually at the bending beam
• Manual crowning device of the bending beam
• Operation via double foot pedal with emergency stop function
• Clean motor-driven machine without hydraulics
• SH models with segmented, high goat foot tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools