Elektri- ja akutööriistad, tööpingid

Tarvikud elektritööriistadele ja tööpinkidele

Generaatorid

Vaata kui Tabel Nimekiri

Sorteerimine

Kuva leheküljel

Core drill GOLD-LINE 30 Weldon, Ø 28 mm

51-38720.1260U28

Core drill optimally suited for:

Steel < 500 N
Steel < 750 Nm
Plastics GFK / CFK

Good for:

Steel < 900 N
Alu < 10% Si
Copper, brass, nickel, tin
cast iron

Use possible with:

Steel < 1100 N
Alu>10% Si

Properties of the GOLD-LINE core drills:
HSS-XE special steel

Made of high-alloy HSS-XE special steel
Thus extreme hardness at the tooth tips (up to 68 HRC)
Long service life

Step hardened HSS core drill

Standard hardened HSS core drills in stages
As a result extremely hard tooth tips (68 HRC) and still flexible core drill

Completely sanded from the full material

This fine grinding increases the cutting performance while reducing friction
For more service life

Gold-Tech surface treatment

Special treatment for longer service life

Five cutting geometries

Specially adapted cutting geometries especially for the different diameters and cutting depths

Suitable for core drills:
Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bektop, Bux, Euroboor, Evolution, Hougen, Jancy, Magbroach, Magtron, Magnetor, Promag, Rotabroach, Ruko + Ruko Easy Lock, Universal ...
Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

42,78€ 53,47€

On request in weeks

Saw band HSS Bi-Metall, M 42 2362 x 19 x 0.9 mm, 5-8 ZpZ, 0°

51-3357522

Saw bands suitable for processing:

Structural steel
Deep drawing steel
cutting steel
tempering steel
hardened steel
Thick-walled pipe
Solid material round steel
Cast iron
pipe
carrier
bunch

General information about bi-metal saw bands:
The starting material of these bi-metal saw bands is a two-component material (bi-metal) obtained by electron welding. The band made of this material has a high-hardening, wear-resistant high-performance high-speed steel in the teeth, while the band body made of alloyed tempered steel is spring-hard and fatigue-proof.
Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

33,33€ 41,66€

On request in weeks

Connection plate

51-3357005

Additionally mountable
with attachments right and left
slots

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

99,99€ 124,99€

On request in weeks

Additional role 620 mm

51-3640289

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

403,88€ 504,85€

On request in weeks

Saw band Bi-Metall M 42 HSS bi-metal, M 42 2480 x 27 x 0.9 mm 4-6 ZpZ, 0°

51-3357526

Saw bands suitable for processing:

Structural steel
Deep drawing steel
cutting steel
tempering steel
hardened steel
Thick-walled pipe
Solid material round steel
Cast iron
pipe
carrier
bunch

27,63€ 34,53€

On request in weeks

Core drill SL50WLDM26MM

51-38720.126526

Core drill optimally suited for:

Steel < 500 N
Plastics GFK / CFK

Good for:

Steel < 750 Nm
Copper, brass, nickel, tin

Use possible with:

Steel < 900 N
Alu < 10% Si

Properties of SILVER-LINE core drills:
HSS-XE special steel

Made of high-alloy HSS-XE special steel
Thus extreme hardness at the tooth tips (up to 68 HRC)
Long service life

Step hardened HSS core drill

Standard hardened HSS core drills in stages
As a result extremely hard tooth tips (68 HRC) and still flexible core drill

Five cutting geometries

Specially adapted cutting geometries especially for the different diameters and cutting depths

41,12€ 51,40€

On request in weeks

Core drill GOLD-LINE 30 Weldon, Ø 59 mm

51-38720.1260U59

Core drill optimally suited for:

Steel < 500 N
Steel < 750 Nm
Plastics GFK / CFK

Good for:

Steel < 900 N
Alu < 10% Si
Copper, brass, nickel, tin
cast iron

Use possible with:

Steel < 1100 N
Alu>10% Si

Properties of the GOLD-LINE core drills:
HSS-XE special steel

Made of high-alloy HSS-XE special steel
Thus extreme hardness at the tooth tips (up to 68 HRC)
Long service life

Step hardened HSS core drill

Standard hardened HSS core drills in stages
As a result extremely hard tooth tips (68 HRC) and still flexible core drill

Completely sanded from the full material

This fine grinding increases the cutting performance while reducing friction
For more service life

Gold-Tech surface treatment

Special treatment for longer service life

Five cutting geometries

Specially adapted cutting geometries especially for the different diameters and cutting depths

131,66€ 164,57€

On request in weeks

Core drill BLUE-LINE 55 Weldon, Ø 41 mm

51-38720.131341

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Alu < 10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK

Good for:

Steel < 1100 N
Stainless steel < 900 N
Alu>10% Si
cast iron

Use possible with:

Steel < 1400 N
Stainless steel>900 N
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
rails

Characteristics of BLUE-LINE core drills:
HSS-XE special steel

Made of high-alloy HSS-XE special steel
Thus extreme hardness at the tooth tips (up to 68 HRC)
Long service life

Step hardened HSS core drill

Standard hardened HSS core drills in stages
As a result extremely hard tooth tips (68 HRC) and still flexible core drill

Completely sanded from the full material

This fine grinding increases the cutting performance while reducing friction
For more service life

unique and patented Durablue coating

Extreme surface hardness and smoothness
Extreme service life even under less than ideal working conditions such as overhead work, dry drilling, etc

Five cutting geometries

Specially adapted cutting geometries especially for the different diameters and cutting depths

Suitable for core drills:
Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

116,66€ 145,82€

On request in weeks

Core drill BLUE-LINE 30 Weldon, Ø 49 mm

51-38720.131249

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Alu < 10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK

Good for:

Steel < 1100 N
Stainless steel < 900 N
Alu>10% Si
cast iron

Use possible with:

Steel < 1400 N
Stainless steel>900 N
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
rails

Characteristics of BLUE-LINE core drills:
HSS-XE special steel

Made of high-alloy HSS-XE special steel
Thus extreme hardness at the tooth tips (up to 68 HRC)
Long service life

Step hardened HSS core drill

Standard hardened HSS core drills in stages
As a result extremely hard tooth tips (68 HRC) and still flexible core drill

Completely sanded from the full material

This fine grinding increases the cutting performance while reducing friction
For more service life

unique and patented Durablue coating

Extreme surface hardness and smoothness
Extreme service life even under less than ideal working conditions such as overhead work, dry drilling, etc

Five cutting geometries

Specially adapted cutting geometries especially for the different diameters and cutting depths

123,65€ 154,57€

On request in weeks

Core drill GOLD-LINE 55 Weldon, Ø 33 mm

51-38720.1270U33

Core drill optimally suited for:

Steel < 500 N
Steel < 750 Nm
Plastics GFK / CFK

Good for:

Steel < 900 N
Alu < 10% Si
Copper, brass, nickel, tin
cast iron

Use possible with:

Steel < 1100 N
Alu>10% Si

Properties of the GOLD-LINE core drills:
HSS-XE special steel

Made of high-alloy HSS-XE special steel
Thus extreme hardness at the tooth tips (up to 68 HRC)
Long service life

Step hardened HSS core drill

Standard hardened HSS core drills in stages
As a result extremely hard tooth tips (68 HRC) and still flexible core drill

Completely sanded from the full material

This fine grinding increases the cutting performance while reducing friction
For more service life

Gold-Tech surface treatment

Special treatment for longer service life

Five cutting geometries

Specially adapted cutting geometries especially for the different diameters and cutting depths

58,44€ 73,05€

On request in weeks

Saw band HSS Bi-Metall, M 42 2645 x 27 x 0,9 mm, 5-8 ZpZ, 0°

51-3357535

Saw bands suitable for processing:

Structural steel
Deep drawing steel
cutting steel
tempering steel
hardened steel
Thick-walled pipe
Solid material round steel
Cast iron
pipe
carrier
bunch

35,24€ 44,04€

On request in weeks

Roller conveyor, discharge side 1000 x 620 mm, discharge side, with a lateral guide roller

51-3649065

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

4016,24€ 5020,30€

On request in weeks

Core drill BLUE-LINE 30 Weldon, Ø 33 mm

51-38720.131233

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Alu < 10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK

Good for:

Steel < 1100 N
Stainless steel < 900 N
Alu>10% Si
cast iron

Use possible with:

Steel < 1400 N
Stainless steel>900 N
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
rails

Characteristics of BLUE-LINE core drills:
HSS-XE special steel

Made of high-alloy HSS-XE special steel
Thus extreme hardness at the tooth tips (up to 68 HRC)
Long service life

Step hardened HSS core drill

Standard hardened HSS core drills in stages
As a result extremely hard tooth tips (68 HRC) and still flexible core drill

Completely sanded from the full material

This fine grinding increases the cutting performance while reducing friction
For more service life

unique and patented Durablue coating

Extreme surface hardness and smoothness
Extreme service life even under less than ideal working conditions such as overhead work, dry drilling, etc

Five cutting geometries

Specially adapted cutting geometries especially for the different diameters and cutting depths

60,65€ 75,81€

On request in weeks

Core drill GOLD-LINE 30 Weldon, Ø 19 mm

51-38720.1260U19

Core drill optimally suited for:

Steel < 500 N
Steel < 750 Nm
Plastics GFK / CFK

Good for:

Steel < 900 N
Alu < 10% Si
Copper, brass, nickel, tin
cast iron

Use possible with:

Steel < 1100 N
Alu>10% Si

Properties of the GOLD-LINE core drills:
HSS-XE special steel

Made of high-alloy HSS-XE special steel
Thus extreme hardness at the tooth tips (up to 68 HRC)
Long service life

Step hardened HSS core drill

Standard hardened HSS core drills in stages
As a result extremely hard tooth tips (68 HRC) and still flexible core drill

Completely sanded from the full material

This fine grinding increases the cutting performance while reducing friction
For more service life

Gold-Tech surface treatment

Special treatment for longer service life

Five cutting geometries

Specially adapted cutting geometries especially for the different diameters and cutting depths

27,44€ 34,30€

On request in weeks

Saw band HSS Bi-Metall, M 42 2480 x 27 x 0.9 mm, 5-8 ZpZ, 0°

51-3357511

Saw bands suitable for processing:

Structural steel
Deep drawing steel
cutting steel
tempering steel
hardened steel
Thick-walled pipe
Solid material round steel
Cast iron
pipe
carrier
bunch

34,27€ 42,84€

On request in weeks

Saw band Bi-metal M42 Sprint-Medium-VS 4520 x 34 x 1.1mm 3-4 tpi

51-3655521

The reinforced HL-combi-tooth with a slightly positive rake angle in combination with a group setting cuts solid material and profiles with particularly low vibration, increases the cutting performance and offers smooth surfaces with a convincing tool life.

The specialist for:

small and medium-sized swing frame machines
common steel grades up to approx. 1400 N/mm² tensile strength
single and bundle cuts
profiles and beams
solid material

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

59,23€ 74,04€

On request in weeks

Core drill BLUE-LINE 55 Weldon, Ø 32 mm

51-38720.131332

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Alu < 10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK

Good for:

Steel < 1100 N
Stainless steel < 900 N
Alu>10% Si
cast iron

Use possible with:

Steel < 1400 N
Stainless steel>900 N
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
rails

Characteristics of BLUE-LINE core drills:
HSS-XE special steel

Made of high-alloy HSS-XE special steel
Thus extreme hardness at the tooth tips (up to 68 HRC)
Long service life

Step hardened HSS core drill

Standard hardened HSS core drills in stages
As a result extremely hard tooth tips (68 HRC) and still flexible core drill

Completely sanded from the full material

This fine grinding increases the cutting performance while reducing friction
For more service life

unique and patented Durablue coating

Extreme surface hardness and smoothness
Extreme service life even under less than ideal working conditions such as overhead work, dry drilling, etc

Five cutting geometries

Specially adapted cutting geometries especially for the different diameters and cutting depths

72,22€ 90,27€

On request in weeks

Core drill GOLD-LINE 30 Weldon, Ø 25 mm

51-38720.1260U25

Core drill optimally suited for:

Steel < 500 N
Steel < 750 Nm
Plastics GFK / CFK

Good for:

Steel < 900 N
Alu < 10% Si
Copper, brass, nickel, tin
cast iron

Use possible with:

Steel < 1100 N
Alu>10% Si

Properties of the GOLD-LINE core drills:
HSS-XE special steel

Made of high-alloy HSS-XE special steel
Thus extreme hardness at the tooth tips (up to 68 HRC)
Long service life

Step hardened HSS core drill

Standard hardened HSS core drills in stages
As a result extremely hard tooth tips (68 HRC) and still flexible core drill

Completely sanded from the full material

This fine grinding increases the cutting performance while reducing friction
For more service life

Gold-Tech surface treatment

Special treatment for longer service life

Five cutting geometries

Specially adapted cutting geometries especially for the different diameters and cutting depths

36,44€ 45,56€

On request in weeks

Core drill GOLD-LINE 30 Weldon, Ø 50 mm

51-38720.1260U50

Core drill optimally suited for:

Steel < 500 N
Steel < 750 Nm
Plastics GFK / CFK

Good for:

Steel < 900 N
Alu < 10% Si
Copper, brass, nickel, tin
cast iron

Use possible with:

Steel < 1100 N
Alu>10% Si

Properties of the GOLD-LINE core drills:
HSS-XE special steel

Made of high-alloy HSS-XE special steel
Thus extreme hardness at the tooth tips (up to 68 HRC)
Long service life

Step hardened HSS core drill

Standard hardened HSS core drills in stages
As a result extremely hard tooth tips (68 HRC) and still flexible core drill

Completely sanded from the full material

This fine grinding increases the cutting performance while reducing friction
For more service life

Gold-Tech surface treatment

Special treatment for longer service life

Five cutting geometries

Specially adapted cutting geometries especially for the different diameters and cutting depths

98,22€ 122,77€

On request in weeks

Carrying rollers for material stands PVC rollers

51-3357609

Additionally mountable
Made of non-slip PVC
To avoid scratches
Simply hang the rollers in the existing holder
In practical wall holder

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

138,09€ 172,61€

On request in weeks