Elektri- ja akutööriistad, tööpingid

Tarvikud elektritööriistadele ja tööpinkidele

Generaatorid

Vaata kui Tabel Nimekiri

Sorteerimine

Kuva leheküljel

GU 3 avariiseiskamisseade

51-3107072

Avariiseiskamisseade GU 3 seadmele.

Võimaldab masina kiiret hädapeatust ja aitab tagada ohutuma töökeskkonna ning seadme turvalise kasutamise.

642,82€ 803,52€

On request in weeks

Core drill HARD-LINE 55 Universal Ø 36 mm

51-38720.131636

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

Suitable for core drills:
Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

70,99€ 88,73€

On request in weeks

Thermo drill THERMDRILL FORM M4 short

51-3060104

Thermdrill replaces rivet nuts

With the Thermdrill process, you can easily create 100% torsion-proof and wobble-free threaded bushes from the existing material in just two steps. And at a fraction of the cost of rivet nuts.

100% torsion-proof
For steel, VA, non-ferrous metal, aluminum
For all common thread sizes
From 1.0 mm wall thickness
For pillar drills, milling machines and CNC (assuming sufficient speed and motor power)

Manufacturer
ONTOOL GmbH
Franz-Gruber-Platz 13, 64859 Eppertshausen, Germany
www.ontool.eu

78,81€ 98,52€

On request in weeks

Thermo drill + thread former THERMDRILL Thread Tool Set FORM M5 short

51-3060505

100% torsion-proof
For steel, VA, non-ferrous metal, aluminum
For all common thread sizes
From 1.0 mm wall thickness
For pillar drills, milling machines and CNC (assuming sufficient speed and motor power)

Manufacturer
ONTOOL GmbH
Franz-Gruber-Platz 13, 64859 Eppertshausen, Germany
www.ontool.eu

104,68€ 130,84€

On request in weeks

Core drill HARD-LINE 40 Universal, Ø 35 mm

51-38720.131535

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

56,10€ 70,12€

On request in weeks

Core drill HARD-LINE 55 Universal Ø 59 mm

51-38720.131659

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

129,43€ 161,80€

On request in weeks

Core drill HARD-LINE 55 Universal Ø 22 mm

51-38720.131622

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

56,25€ 62,36€

On request in weeks

Core drill HARD-LINE 110 Weldon Ø 30 mm

51-38720.166030

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

102,00€ 127,50€

On request in weeks

Mould dresser

51-3939122

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

1625,59€ 2031,99€

On request in weeks

Core drill HARD-LINE 110 Weldon Ø 38 mm

51-38720.166038

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

140,76€ 175,96€

On request in weeks

Core drill HARD-LINE 110 Weldon Ø 40 mm

51-38720.166040

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

140,76€ 175,96€

On request in weeks

Cup grinding wheel green 40x22x10

51-3107121

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

12,38€ 15,48€

On request in weeks

Core drill HARD-LINE 40 Universal, Ø 75 mm

51-38720.131575

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

161,44€ 201,80€

On request in weeks

Thermo drill THERMDRILL CUT M8 short

51-3060168

100% torsion-proof
For steel, VA, non-ferrous metal, aluminum
For all common thread sizes
From 1.0 mm wall thickness
For pillar drills, milling machines and CNC (assuming sufficient speed and motor power)

Manufacturer
ONTOOL GmbH
Franz-Gruber-Platz 13, 64859 Eppertshausen, Germany
www.ontool.eu

179,06€ 198,50€

On request in weeks

Core drill HARD-LINE 110 Weldon Ø 35 mm

51-38720.166035

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

122,88€ 153,60€

On request in weeks

Core drill HARD-LINE 55 Universal Ø 20 mm

51-38720.131620

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

48,34€ 60,41€

On request in weeks

Core drill HARD-LINE 110 Weldon Ø 55 mm

51-38720.166055

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

223,76€ 279,69€

On request in weeks

Core drill HARD-LINE 55 Universal Ø 42 mm

51-38720.131642

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

85,65€ 107,06€

On request in weeks

Core drill HARD-LINE 40 Universal, Ø 40 mm

51-38720.131540

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

64,22€ 80,28€

On request in weeks

Morse taper MK5-B16

51-3050675

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

13,81€ 17,26€

On request in weeks