Elektri- ja akutööriistad, tööpingid

The moulding gouge is a versatile tool for woodturners. It is ideal for creating profiles and chamfers in longitudinal wood. However, thanks to its fingernail-shaped cutting edge with long flanks, it can also be used to work on cross-grain wood. This tool can be used to make items such as chair legs, stair risers or spinning tops. Thanks to the fingernail-style grind, the cutting edge of the tool has a small radius, and the flanks are ground evenly and well back. The bevel angle of the cutting edge is between 35° and 45°, which ensures a high degree of sharpness and allows the tool to penetrate deeply into profiles. The ground-back flanks reduce the risk of the tool catching in the wood when turning, for example, a round rod or a moulding. Narrower widths of the shaping tube are intended for finer shapes and contours.

Applications:

• Long grain / cross grain
• Shaping and profiling

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Clamping jaws small: Clamping = 10 - 64 mm, spreading = 26 - 62 mm
• Stepped jaws: Spreading small = 19 - 53 mm, spreading large = 39 - 75 mm
• Dovetail jaws: Clamping = 32 - 68 mm, spreading = 46 - 82 mm
• Clamping jaws large: Clamping = 75 - 112 mm, spreading = 90 - 126 mm

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

Very sturdy, open-spanned long belt, which is additionally manufactured with new Advanced Coating Technology (ACT) and thus is significantly more resistant to clogging due to sanding dust, especially when working with soft woods. A special product for resin-rich or clogging materials. Areas of application are intermediate and fine sanding by means of a contact shoe in the finer grain area. Antistatic, open scattering and ACT ensure very good removal performance and outstanding service life.
Manufacturer
Klingspor GmbH & Co. KG
Hüttenstraße 36, 35708 Haiger, Germany
www.klingspor.de

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Tangs for use on lathes.
• MT2 adapter on the shaft
• For all fitting wood lathes

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

Very sturdy, open-spanned long belt, which is additionally manufactured with new Advanced Coating Technology (ACT) and thus is significantly more resistant to clogging due to sanding dust, especially when working with soft woods. A special product for resin-rich or clogging materials. Areas of application are intermediate and fine sanding by means of a contact shoe in the finer grain area. Antistatic, open scattering and ACT ensure very good removal performance and outstanding service life.
Manufacturer
Klingspor GmbH & Co. KG
Hüttenstraße 36, 35708 Haiger, Germany
www.klingspor.de

The moulding gouge is a versatile tool for woodturners. It is ideal for creating profiles and chamfers in longitudinal wood. However, thanks to its fingernail-shaped cutting edge with long flanks, it can also be used to work on cross-grain wood. This tool can be used to make items such as chair legs, stair risers or spinning tops. Thanks to the fingernail-style grind, the cutting edge of the tool has a small radius, and the flanks are ground evenly and well back. The bevel angle of the cutting edge is between 35° and 45°, which ensures a high degree of sharpness and allows the tool to penetrate deeply into profiles. The ground-back flanks reduce the risk of the tool catching in the wood when turning, for example, a round rod or a moulding. Narrower moulding tubes are designed for finer shapes and contours. For this purpose, we offer the 12 mm moulding tube.

Applications:

• Long grain / cross grain
• Shaping and profiling

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

4 different jaw chucks for the following clamping options:

• Outside closed: 90 mm, inside closed 75 mm
• Outside closed: 50 mm, inside closed 38 mm
• Outside closed: 38 mm, inside closed 18 mm
• Outside closed: 21 mm, inside closed 9 mm

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• M33x3.5 mounting flange for the CBN grinding wheel 5832100
• Good concentricity for perfect running of the grinding wheel
• Including run-off protection and holes for grub screws, therefore also protected against unintentional run-off on machines without ASR groove.
• Made in Europe

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

For sharpening all gouges, tubes and other tools with complex shapes, such as chisel feet and carbide turning tools

• For sharpening all gouges, tubes and other tools with complex shapes, such as chisel feet and carbide turning tools
• The device can be adapted to the shape of the tool so that a uniform grinding bevel can also be produced on the rounded cutting edge
• Compatible with the tool rests of the woodturning machines (5831411, 5831412, 5831413) to sharpen the turning tools directly on the machine
• Also perfectly suitable for the wet grinding system NTS 201 (5750201) and NTS 256 (5750256)

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

Very sturdy, open-spanned long belt, which is additionally manufactured with new Advanced Coating Technology (ACT) and thus is significantly more resistant to clogging due to sanding dust, especially when working with soft woods. A special product for resin-rich or clogging materials. Areas of application are intermediate and fine sanding by means of a contact shoe in the finer grain area. Antistatic, open scattering and ACT ensure very good removal performance and outstanding service life.
Manufacturer
Klingspor GmbH & Co. KG
Hüttenstraße 36, 35708 Haiger, Germany
www.klingspor.de

• For precise alignment of the spindle head to the tailstock
• Ensures perfectly aligned centers
• Perfectly suited for woodturning machines with rotating spindle head
• Material: #45 steel

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Cryo M2-HSS tools with an exceptionally long service life thanks to special heat treatment
• An extremely fine crystal structure ensures long-lasting blade sharpness
• A 320 mm long beech wood handle offers a perfect grip and ensures comfortable working
• This set includes all the tools required to craft a wide variety of items, such as plates, candlesticks, bowls and much more

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

Sanding sheet consisting of Velcro sandpaper, designed as a universal sanding agent for wood and metal sanding on hand-held sanding machines. Due to its large grain size, it can be used for coarse as well as for fine sanding.
Manufacturer
Klingspor GmbH & Co. KG
Hüttenstraße 36, 35708 Haiger, Germany
www.klingspor.de

• Perfectly suited for extracting sanding dustExtraction funnel
• can be positioned
• flexiblyHeight adjustable from 750 to 1200 mmHose connection
• 100 mm

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Compasses with holder for pencils
• Perfectly suited as a measuring and testing tool
• Measurements up to 400 mm diameter possible
• Fixation of the measurement possible via clamping screw on the setting bow
• Material: #45 steel

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de